Pake 3 bag silikon pou chodyè presyon pwogramasyon Manyèl enstriksyon

Pwodwi souview

This replacement pack includes three silicone rings designed for 6-liter programmable pressure cookers. These rings are essential components responsible for sealing the pot during the cooking and pressure-building process, ensuring safe and efficient operation. The pack is compatible with various 6-liter programmable pressure cooker models, including the entire GM range (models B, C, D, E, F, G, and H or Cocimix), Fussion-Cook, Erika, Cocichef, Newcook, Newchef, jrd, Diamante, and Aristokratisch.

The pack consists of three distinct silicone rings:

• Large Silicone Ring: Designed for the pot's counter-lid.
• Medium Silicone Ring: For the central part (inner axis) of the counter-lid.
• Small Silicone Ring: For the inner pin of the valve located in the lid.

Figure 1: The three silicone rings included in the pack. The large ring is for the counter-lid, the medium ring for the central part of the counter-lid, and the small ring for the valve's inner pin.

Enstalasyon ak Enstalasyon

Before installing the new silicone rings, ensure your pressure cooker is unplugged and completely cooled. Thoroughly clean the areas where the rings will be placed to remove any food debris or residue.

Etap enstalasyon:

1. Large Silicone Ring (Counter-Lid):

   Locate the counter-lid of your pressure cooker. Gently pull out the inner plug of the counter-lid to access the area where the large silicone ring is installed. Remove the old, worn ring. Carefully place the new large silicone ring onto the external part of the counter-lid, ensuring it sits snugly and evenly in its groove.
2. Medium Silicone Ring (Central Counter-Lid):

   Still on the counter-lid, identify the central part or inner axis. Remove the existing medium ring from this area. Install the new medium silicone ring onto the internal central part of the counter-lid, making sure it is properly seated to maintain a tight seal.

3. Small Silicone Ring (Valve):

   Locate the valve on the lid of your pressure cooker. There is a small pin inside the valve. Carefully remove the damaged small rubber ring from this pin. Replace it with the new small silicone ring, ensuring it fits securely on the pin to facilitate proper valve function and sealing.

After installing all rings, ensure they are correctly positioned and free from twists or pinches before using the pressure cooker.

Prensip Fonksyònman

The silicone rings are crucial for the safe and effective operation of your programmable pressure cooker. Their primary function is to create an airtight seal between different components of the cooker, allowing pressure to build up safely inside the pot during cooking.

• La large and medium rings on the counter-lid work together to seal the main cooking chamber, preventing steam and pressure from escaping. This seal is vital for the pressure cooker to reach and maintain the necessary internal pressure for cooking.
• La small ring within the valve mechanism ensures that the valve operates correctly, sealing when pressure builds and releasing steam safely when required. A properly sealed valve is critical for both cooking efficiency and safety.

Always ensure the rings are clean and properly seated before each use to guarantee optimal performance and safety.

Antretyen

Regular maintenance of your silicone rings will extend their lifespan and ensure the continued safe operation of your pressure cooker.

Netwayaj:

After each use, remove all silicone rings from their respective positions. Wash them thoroughly with warm, soapy water. Rinse them well and allow them to air dry completely before re-installing them or storing them. This prevents food residue buildup and odors. Avoid using abrasive cleaners or scouring pads, as these can damage the silicone.

Ranplasman:

Silicone rings are consumable parts and will wear out over time due to heat, pressure, and repeated use. It is recommended to inspect the rings regularly for signs of wear, such as cracks, hardening, discoloration, or stretching. Replace the rings immediately if you notice any damage or if your pressure cooker begins to lose pressure or leak steam during operation. This pack provides a convenient set of replacements for all three critical sealing points.

Depanaj

If you experience issues with your programmable pressure cooker after installing new silicone rings, consider the following common problems and solutions:

• Pressure Not Building or Leaking Steam:

  This is the most common sign of a sealing issue. Ensure all three silicone rings are correctly installed and seated firmly in their grooves. Check for any twists, pinches, or debris caught under the rings. Verify that the rings are the correct size for your 6-liter pressure cooker model. If the rings are new and correctly installed, but the issue persists, inspect the pressure cooker's lid and pot rim for any deformities or damage that might prevent a proper seal.
• Unusual Odors from Rings:

  Silicone can absorb food odors over time. Ensure thorough cleaning after each use. Soaking the rings in a solution of water and white vinegar or baking soda can help neutralize odors. If odors persist after cleaning, it may be an indication that the rings need replacement.

• Rings Appearing Stiff or Brittle:

  Over time, silicone can lose its flexibility due to heat exposure. If the rings feel stiff, brittle, or have visible cracks, they are no longer providing an effective seal and must be replaced immediately to ensure safety and performance.

Always prioritize safety. If you are unsure about the cause of a problem or if issues persist, consult your pressure cooker's original manual or contact the manufacturer for assistance.

Espesifikasyon

Garanti ak sipò

Specific warranty information for this product is not provided. For any questions regarding product defects, returns, or further assistance, please contact the seller or retailer from whom you purchased this item. Please refer to your purchase receipt or order details for seller contact information.