1. Entwodiksyon
This user manual provides detailed instructions for the installation, operation, and maintenance of the AMOCAM K80 Power Supply Control unit. This device is designed to provide stable DC 12V power for various door access control systems, including electric locks, access controllers, and exit buttons. Please read this manual thoroughly before installation and use to ensure proper function and safety.
2. Enfòmasyon sou Sekirite
- Asire vol D' atage (AC 110-240V) matches the specifications before connecting.
- All wiring should be performed by a qualified electrician to prevent electrical shock or damage.
- Dekonekte kouran an anvan ou fè nenpòt enstalasyon, antretyen oswa depanaj.
- Pa ekspoze aparèy la nan imidite oswa tanperati ekstrèm.
- Aparèy sa a fèt pou itilize andedan kay la sèlman.
- Asire bon baz pou anpeche danje elektrik.
3. Pwodwi Features
- Inivèsèl Antre Voltage: Supports AC 100-240V, 50-60Hz, suitable for various regions.
- Sòti ki estab: Provides stable DC 12V, 3A output for connected devices.
- Kontwòl versatile: Features NC (Normally Closed) and NO (Normally Open) outputs to control various electric locks (e.g., electric gate lock, strike lock, bolt lock, magnetic lock).
- Adjustable Lock Delay: Integrated delay control circuit allows adjustment of lock time from 0 to 15 seconds.
- Pwoteksyon Sekirite: Includes short-circuit and overload protection.
- Konsepsyon kontra enfòmèl ant: Small and lightweight for easy installation.
- Aplikasyon lajè: Compatible with building intercoms, villa doorbells, apartment doorphones, home video door phone controllers, and various access control systems.
4. Espesifikasyon
| Modèl | K80 (Item Model Number: 12V-Powers) |
| Antre Voltage | AC 110-240V, 50-60Hz |
| Sòti Voltage | DC 12V, 3A |
| Lock Delay Time | Reglabl 0-15 segonn |
| Dimansyon (L x W x H) | 5.5 x 3.7 x 1.5 pous (apeprè 140 x 94 x 38 mm) |
| Pwa atik | 11.1 ons (315 gram) |
| Manifakti | AMOCAM |
| UPC | 647726600253 |
5. Enstalasyon ak Enstalasyon
Before beginning installation, ensure all power is disconnected. The AMOCAM K80 Power Supply Control unit is designed for easy integration into existing or new access control systems.
5.1 Idantifikasyon konpozan
The unit features clearly labeled terminals for input power, control signals, and output to electric locks. A red LED indicates power status.
5.2 Dyagram fil elektrik
Refer to the following diagrams for correct wiring configurations.
5.2.1 AC Input Wiring
Connect the AC 110-240V power source to the designated AC input terminals on the K80 unit. It is recommended to connect through a circuit breaker for safety.
5.2.2 Access Control System Wiring
The K80 unit provides terminals for:
- CONTROL- / CONTROL+: Input for 5-24V DC to trigger the lock release.
- POUSE: Connects to an exit button.
- GND: Koneksyon tè.
- + 12V: DC 12V output for powering devices like keypads or doorbells.
- -COM: Common terminal for lock connections.
- +NC: Normally Closed output for electric locks (lock is closed when power is off).
- +NO: Normally Open output for electric locks (lock is open when power is off).
Ensure all connections are secure and correctly matched to the corresponding terminals on your access control devices and electric locks.
6. Operasyon
6.1 Limen
Once all wiring is complete and verified, connect the AC power. The red "POWER" indicator LED on the K80 unit should illuminate, indicating that the unit is receiving power and providing DC 12V output.
6.2 Adjusting Lock Delay Time
The K80 unit features an adjustable dial for setting the lock release delay time. This dial is typically located on the side or bottom of the unit and can be adjusted using a small screwdriver. The delay can be set from 0 to 15 seconds, allowing the connected electric lock to remain open for the desired duration after activation.
- To adjust, locate the "Time" dial.
- Use a small screwdriver to carefully turn the dial to increase or decrease the delay.
- Test the lock operation after adjustment to ensure the desired delay is achieved.
6.3 Lock Control
The K80 unit controls electric locks via its NC and NO outputs.
- Normally Closed (NC) Locks: These locks remain locked when power is applied and unlock when power is interrupted. Connect to the +NC and -COM terminals.
- Normally Open (NO) Locks: These locks remain unlocked when power is applied and lock when power is interrupted. Connect to the +NO and -COM terminals.
When an access control device (e.g., keypad, exit button) sends a signal to the K80 unit, it will momentarily cut or apply power to the connected lock terminals based on the lock type (NC/NO) and the set delay time, thereby releasing or securing the lock.
7. Antretyen
- Netwayaj: Use a dry, soft cloth to clean the exterior of the unit. Do not use liquid cleaners or solvents.
- Enspeksyon: Tcheke tout koneksyon fil elektrik yo detanzantan pou asire yo byen fèm epi yo pa gen korozyon.
- Kondisyon anviwònman: Ensure the unit is kept in a dry environment, away from direct sunlight and extreme temperatures.
- Pa gen okenn pati itilizatè yo ka fè sèvis: The internal components are not user-serviceable. Do not attempt to open or repair the unit yourself, as this will void the warranty and may cause electrical hazards.
NAN. Depanaj
| Pwoblèm | Kòz posib | Solisyon |
|---|---|---|
| No power indicator (red LED off) | No AC input power; faulty wiring; internal fuse blown. |
|
| Electric lock does not open/close | Incorrect lock wiring (NC/NO); faulty lock; insufficient power; incorrect delay setting. |
|
| Lock opens/closes too quickly/slowly | Incorrect lock delay time setting. | Adjust the "Time" dial on the K80 unit to the desired delay (0-15 seconds). |
| Inite a santi l cho | Overload; poor ventilation. |
|
9. Garanti ak sipò
For warranty information or technical support, please contact AMOCAM customer service. Refer to your purchase documentation for specific warranty terms.
AMOCAM Technology Inc. is committed to providing high-quality products and customer support.
