Manyèl Itilizatè Kabann Depo Acme Louis Philippe III Queen

1. Entwodiksyon

This manual provides essential instructions for the assembly, operation, maintenance, and troubleshooting of your Acme Louis Philippe III Queen Storage Bed. Please read this manual thoroughly before assembly and retain it for future reference. This bed features a classic design with integrated storage, including drawers and open compartments, designed for convenience and functionality.

2. Enfòmasyon sou Sekirite

• Toujou swiv enstriksyon asanblaj yo ak anpil atansyon. Yon asanblaj ki pa kòrèk ka lakòz enstabilite ak blesi.
• Asire w tout pyès ki nan konpitè yo byen sere anvan w itilize yo. Tcheke epi sere pyès ki nan konpitè yo detanzantan jan sa nesesè.
• Do not exceed the maximum weight limit of 820 pounds for the bed.
• Kenbe ti pati ak materyèl anbalaj lwen timoun yo pou anpeche danje toufe.
• Use caution when moving the bed to prevent damage or injury. It is recommended to have at least two people for assembly and moving.
• Pwodui sa a fèt pou itilizasyon granmoun.

3. Pake kontni

Before beginning assembly, verify that all components listed in your product's packaging are present and undamaged. Refer to the parts list provided with your specific packaging for a complete inventory. Typical components include:

• Headboard with integrated storage (drawers and open compartments)
• Footboard
• Side ray
• Bed slats or support system
• Storage drawers for the bed base
• Assembly hardware (screws, bolts, washers, etc.)

4. Enstriksyon Asanble

Assembly of the Acme Louis Philippe III Queen Storage Bed is required. It is highly recommended that two adults perform the assembly to ensure safety and proper construction. Please follow the step-by-step instructions and diagrams provided in the separate assembly guide included with your product packaging. A box spring is not required for this bed.

Etap Asanble Jeneral la:

1. Depake tout konpozan yo epi mete yo sou yon sifas pwòp e mou pou evite reyur.
2. Idantifye tout pyès ak pyès ki nan konpitè yo lè l sèvi avèk lis pyès yo bay la.
3. Lè w sèvi ak pyès ki nan konpitè espesifye a, tache ray bò yo ak tèt kabann nan ak pye kabann nan.
4. Install the bed slats or support system across the side rails.
5. Assemble and insert the storage drawers into their designated compartments in the bed base and headboard.
6. Ensure all connections are secure and stable before placing a mattress on the bed.

Figure 1: Fully assembled Acme Louis Philippe III Queen Storage Bed, showcasing the headboard with drawers and open compartments, and the storage drawers in the bed base.

5. Operasyon Enstriksyon

The Louis Philippe III Queen Storage Bed is designed for ease of use with its integrated storage features.

Itilizasyon tiwa depo yo:

• The bed includes five drawers: two in the headboard and three in the bed base.
• To open a drawer, gently pull the handle. To close, push the drawer firmly until it is fully seated.
• Avoid overloading drawers to ensure smooth operation and prevent damage to the drawer slides.

Using the Open Compartments:

• The headboard features two open compartments, ideal for books, decorative items, or small electronics.
• Ensure items placed in these compartments are stable and do not protrude in a way that could cause injury or fall.

Figure 2: Detail of an open storage drawer, highlighting the brushed nickel hardware and interior finish.

6. Antretyen ak Swen

Proper care will extend the life and appearance of your bed. This product is made from wood and veneers with a white finish.

• Netwayaj: Siye sifas yo ak yon mou, damp twal. Evite pwodui chimik ki fò, pwodui netwayaj abrazif, oswa pwodui poli ki ka domaje fini an.
• Devèsman: Siye likid ki koule a imedyatman avèk yon twal pwòp e sèk.
• Limyè solèy la: Evite ekspoze a limyè solèy dirèk pou yon tan ki long, sa ka lakòz li pèdi koulè oswa pèdi koulè.
• Chalè ak imidite: Keep the bed away from direct heat sources and areas of high humidity.
• Materyèl: Periodically check all bolts and screws and tighten them as necessary to maintain stability.

NAN. Depanaj

If you encounter issues with your bed, refer to the following common solutions:

• Ankadreman ki pa balanse: Ensure all assembly hardware is fully tightened. If the issue persists, disassemble and reassemble, paying close attention to the alignment of parts.
• Tiwa yo pa glise fasilman: Check for obstructions in the drawer slides. Ensure the drawers are correctly aligned on their tracks. Avoid overloading the drawers.
• Pati ki manke: If any parts were missing upon delivery, contact customer support immediately with your purchase information.
• Pati ki domaje: If any parts arrived damaged, do not proceed with assembly. Contact customer support for replacement parts.

8. Espesifikasyon

9. Enfòmasyon sou Garanti

This Acme Louis Philippe III Queen Storage Bed comes with a Limited Warranty. Details regarding the duration and coverage of this warranty are typically provided in a separate warranty document included with your purchase. The limited warranty generally covers manufacturing defects in materials and workmanship under normal use. It typically does not cover damage resulting from improper assembly, misuse, accidents, or normal wear and tear. Please retain your proof of purchase for warranty claims.

10. Sipò pou Kliyan

For assistance with assembly, missing parts, damaged components, or warranty inquiries, please contact Acme Furniture customer support. Have your model number (AC-24490Q) and proof of purchase readily available when contacting support.

You may find contact information on the packaging, the Acme Furniture websit entènèt la, oubyen atravè revandè ou a.