1. Entwodiksyon
Mèsi pou acha aasing the Bunker Hill Security Battery Operated LED Motion Sensor Light. This device is designed to provide convenient, automatic illumination in indoor areas, enhancing security and visibility. Its motion-sensing capabilities ensure light is provided only when needed, conserving battery life. Please read this manual thoroughly before installation and operation to ensure proper use and longevity of your product.
2. Enfòmasyon sou Sekirite
- Itilize andedan kay la sèlman: This product is designed for indoor use. Do not expose it to rain, moisture, or extreme temperatures.
- Sekirite batri: Use only the specified type and size of batteries. Ensure correct polarity (+/-) when inserting batteries. Do not mix old and new batteries, or different types of batteries. Remove batteries if the device will not be used for an extended period. Dispose of used batteries responsibly according to local regulations.
- Montaj: Ensure the mounting surface is stable and can support the weight of the light.
- Netwayaj: Do not use abrasive cleaners or solvents. Clean with a soft, dry cloth.
- Demonte: Pa eseye demonte oswa modifye limyè a. Sa ap anile garanti a epi li ka lakòz domaj oswa blesi.
3. Pake kontni
Tanpri tcheke pake a pou atik sa yo:
- 1 x Battery Operated LED Motion Sensor Light Unit
- 1 x kontwòl remote
- Mounting Hardware (screws/anchors, if applicable)
- Manyèl Itilizatè (dokiman sa a)
Imaj 1: Devan view of the Bunker Hill Security Battery Operated LED Motion Sensor Light. The unit is white with a blue translucent top housing the LED, and a rectangular motion sensor window on the front face.
4. Enstalasyon ak Enstalasyon
4.1 Enstalasyon batri
This device requires batteries for operation (batteries are not included). Locate the battery compartment, typically on the back or bottom of the unit. Insert the required number and type of batteries (e.g., AA, AAA, C, D – check the compartment for specific markings) ensuring correct polarity (+ and -). Close the battery compartment securely.
4.2 Montaj
The light is designed for wall mounting. Choose an indoor location where the motion sensor will have an unobstructed view of the area you wish to monitor. Avoid placing it near heat sources, direct sunlight, or areas with strong air currents, as these can interfere with sensor performance.
- Make pozisyon enstalasyon ou vle a sou miray la.
- Drill pilot holes if necessary, using a drill bit appropriate for your wall material and the provided mounting hardware.
- Insert wall anchors if required.
- Secure the light unit to the wall using the provided screws. Ensure it is firmly attached.
5. Operasyon
Once batteries are installed and the unit is mounted, the motion sensor light is ready for operation.
- Aktivasyon otomatik: The light will automatically turn on when motion is detected within its sensing range in a dark environment.
- Dezaktivasyon otomatik: After a period of no motion detection, the light will automatically turn off to conserve battery power. The duration the light stays on may vary based on the model.
- Kontwòl Remote: Use the included remote control to manually turn the light on/off or adjust settings if available (e.g., brightness, duration, sensitivity). Refer to the remote control's specific markings for its functions.
6. Antretyen
- Ranplasman batri: When the light dims or fails to activate, it is time to replace the batteries. Follow the battery installation steps (Section 4.1).
- Netwayaj: Periodically wipe the light and sensor window with a soft, dry, lint-free cloth to remove dust and dirt. Do not use liquid cleaners or sprays directly on the unit.
NAN. Depanaj
| Pwoblèm | Kòz posib | Solisyon |
|---|---|---|
| Limyè pa limen. | Pil ki mouri oswa ki mal enstale. | Ranplase pil yo, asire w ke polarite a kòrèk. |
| Insufficient darkness for sensor activation. | Ensure the area is dark enough for the light sensor to activate. | |
| Motion sensor obstructed or dirty. | Clear any obstructions from the sensor window and clean it. | |
| Limyè a rete limen tout tan. | Mouvman kontinyèl detekte. | Ensure no continuous motion is within the sensor's range. Reposition the light if necessary. |
| Kapab fonksyone byen. | Remove batteries for a few minutes, then reinsert to reset the unit. If problem persists, contact support. |
8. Espesifikasyon
- Modèl: 0015817
- Mak: Bunker Hill Security
- Kalite sous limyè: dirije
- Lamp Kalite: dirije
- Kantite sous limyè: 1
- Sous pouvwa: Batri Powered
- Kalite switch: Mouvman Capteur
- Karakteristik espesyal: Mouvman Capteur
- Materyèl: Plastik
- Materyèl de baz: Plastik
- Materyèl lonbraj: Plastik
- Koulè lonbraj: Blan
- Koulè: Blue (LED light color)
- Kalite montaj: Mi mòn
- Itilizasyon anndan/deyò: Andedan kay la
- Èske san fil?: Wi
- Itilizasyon Rekòmande: Sekirite
9. Garanti ak sipò
For warranty information and customer support, please refer to the documentation provided at the time of purchase or visit the official Bunker Hill Security websit la. Kenbe resi acha ou kòm prèv acha pou nenpòt reklamasyon garanti.
Si ou rankontre nenpòt pwoblèm ki pa kouvri nan manyèl sa a, tanpri kontakte machann nan oswa sèvis kliyan manifakti a pou asistans.
