Dioche 125 KHz RFID Access Control Module User Manual

1. Entwodiksyon

This manual provides detailed instructions for the installation, operation, and maintenance of the Dioche 125 KHz RFID Access Control Module. This module is designed for integrated access control systems, offering reliable card reading capabilities.

2. Enfòmasyon sou Sekirite

• Asire ekipman pou pouvwa a voltage is within the specified range (9-12V DC) to prevent damage to the module.
• Avoid exposing the module to moisture, extreme temperatures, or corrosive environments.
• Handle the circuit board with care to prevent electrostatic discharge (ESD) damage.
• Do not attempt to modify the module unless explicitly instructed, as this may void the warranty and cause malfunction.

3. Pwodwi souview

The Dioche 125 KHz RFID Access Control Module is an integrated unit designed for reading 125 KHz RFID cards. It features a compact design and stable performance for various access control applications.

Karakteristik kle:

• Integrated RFID module for access control.
• Effective card reading distance: 5 to 15 cm.
• Professional production for stable performance.

Idantifikasyon konpozan:

The module includes various connection points and indicators:

• J1 Main Connection Block: Primary terminal for power and data connections.
• S1/S2 Setting Terminal: Used for configuring module settings.
• Buzzer: Provides audible feedback for operations.
• Indicating LED: Visual status indicator.
• J2 Infrared Port: For infrared communication or programming (if supported by external tools).
• S3 Relay Output Selection: Configures the relay output behavior.
• Antenna Interface J3-AJ3-B: Connection point for the external RFID antenna coil.

4. Enstalasyon ak Enstalasyon

Follow these steps to properly set up your RFID access control module.

4.1 Wiring the Module

The module requires a 9-12V DC power supply. Connect the power and data lines to the J1 Main Connection Block according to your system's requirements. Ensure correct polarity.

4.2 Konekte antèn la

Connect the provided antenna coil to the Antenna Interface J3-AJ3-B. The antenna is crucial for reading RFID cards.

4.3 Final Asanble

Once the wiring and antenna are connected, the module is ready for integration into your access control system.

5. Operasyon Enstriksyon

This section outlines the basic operation of the RFID module.

5.1 Limen

After connecting the power supply, the module will power on. The Indicating LED will illuminate, and the Buzzer may emit a short tone to confirm startup.

5.2 Reading RFID Cards

Present a 125 KHz RFID card or tag within 5 to 15 cm of the antenna coil. Upon successful reading, the module will typically provide an audible beep from the Buzzer and/or a change in the Indicating LED status. The data from the card will be transmitted via the data lines connected to J1.

5.3 Sòti relè

The module features a relay output, which can be configured via the S3 Relay Output Selection. This relay can be used to control an electronic lock or other access mechanism based on successful card authentication.

5.4 Programming (Advanced)

While the module is designed for integrated systems, some advanced functions like adding or deleting RFID tags may require dedicated programming cards or an infrared remote control. These accessories are typically not included with the module and must be sourced separately if required for your application.

6. Antretyen

The Dioche RFID module is designed for low maintenance. Follow these guidelines to ensure its longevity:

• Kenbe modil la pwòp epi san pousyè ak debri.
• Regularly check all wiring connections for security and integrity.
• Avoid physical impact or excessive vibration.

NAN. Depanaj

If you encounter issues with your RFID module, refer to the following troubleshooting tips:

7.1 Modil la pa limen

• Check the power supply: Ensure it is providing 9-12V DC and is correctly connected to the J1 Main Connection Block.
• Verify polarity: Incorrect power polarity can prevent the module from operating.

7.2 Poor Card Reading Sensitivity

• Plasman antèn: Ensure the RFID card is within the effective reading range (5-15 cm) of the antenna.
• Koneksyon antèn: Verify the antenna is securely connected to the J3-AJ3-B interface.
• Entèferans Anviwònman: Metal objects or strong electromagnetic fields near the antenna can reduce reading performance. Try relocating the module or antenna.
• Antenna Cable Extension: Extending the antenna cable significantly can weaken the signal and reduce sensitivity. If an extension is necessary, use shielded cables and keep the length to a minimum.

7.3 No Response to Cards

• Kalite kat: Confirm that you are using 125 KHz RFID cards, as the module is designed specifically for this frequency.
• Estati Modil: Check the Indicating LED to ensure the module is powered and operational.

8. Espesifikasyon

9. Garanti ak sipò

For warranty information and technical support, please refer to the documentation provided with your purchase or contact your retailer. Keep your proof of purchase for any warranty claims.