SSL02 All-Integrated Solar Light

1. Entwodiksyon

Thank you for choosing the SSL02 All-Integrated Solar Light. This product is designed to provide efficient and reliable outdoor lighting using solar power. It features an integrated solar panel, LED light source, and battery, along with intelligent control systems including a night sensor and motion sensor for optimal performance and energy saving. Please read this manual thoroughly before installation and operation to ensure proper use and longevity of your solar light.

2. Enfòmasyon sou Sekirite

• Always handle the product with care. Avoid dropping or subjecting it to strong impacts.
• Do not attempt to disassemble or modify the solar light. This may void the warranty and cause damage or injury.
• Ensure the installation location is stable and secure to prevent the light from falling.
• Keep the solar panel clean to ensure maximum charging efficiency.
• Do not dispose of the battery in fire, as it may explode. Follow local regulations for battery disposal.
• Avoid direct eye exposure to the LED light when it is operating, as it is very bright.

3. Pake kontni

Tanpri verifye pake a pou asire w ke tout konpozan yo prezan:

• 1 x SSL02 All-Integrated Solar Light unit
• 1 x kontwòl remote
• Materyèl pou monte (boulon, nwa, rondelle)
• Manyèl Enstriksyon

4. Enstalasyon ak Enstalasyon

The SSL02 solar light is designed for outdoor wall mount installation. Proper placement is crucial for optimal solar charging.

4.1 Chwazi yon kote enstalasyon

• Select a location that receives direct sunlight for at least 6-8 hours per day. Avoid areas shaded by trees, buildings, or other obstructions.
• Ensure the light is mounted at a height that allows for effective illumination of the desired area and proper motion sensor detection.
• The recommended mounting height is typically between 10-20 feet (3-6 meters) for optimal light distribution.

4.2 Enstriksyon pou monte

1. Prepare sifas montaj la: Ensure the wall or pole is sturdy enough to support the weight of the light.
2. Make pwen perçage yo: Sèvi ak sipò montaj la kòm modèl pou make pozisyon pou perçage twou yo.
3. Fè twou: Drill holes at the marked positions using an appropriate drill bit for your mounting surface (e.g., masonry bit for concrete, wood bit for wood).
4. Sekirize bracket la: Attach the mounting bracket to the wall or pole using the provided screws and anchors (if necessary). Ensure it is level and securely fastened.
5. Tache limyè a: Carefully attach the SSL02 solar light unit to the secured mounting bracket using the provided bolts, nuts, and washers. Tighten all fasteners firmly to prevent movement.

This image displays the SSL02 All-Integrated Solar Light from a slightly elevated angle, mounted on a pole. The light features a long, rectangular silver housing with two distinct LED panels visible on its underside. The top surface appears to be the integrated solar panel. The mounting bracket is visible, securing the light to the pole.

4.3 Premye chaj

After installation, allow the solar light to charge for at least 24-48 hours in direct sunlight before its first use. This ensures the replaceable Li-ion battery is fully charged and ready to provide optimal performance.

5. Operasyon Enstriksyon

The SSL02 solar light operates automatically based on ambient light and motion detection. It can also be controlled via the included remote control.

5.1 Operasyon otomatik

• Night Sensor: Limyè a pral otomatikman limen lè solèy kouche epi etenn nan douvanjou.
• Capteur Mouvman: When motion is detected within its range at night, the light will illuminate at full brightness (2,000 Lumen Output). After a period of no motion, it will dim or turn off depending on the selected mode.

5.2 Fonksyon kontwòl Remote

The remote control allows you to select different operating modes and manually control the light.

• ON/OFF: Limen oswa etenn limyè a manyèlman.
• Mode 1 (Motion Sensor + Dim): Light stays dim at night and brightens to full output when motion is detected.
• Mode 2 (Motion Sensor Only): Light stays off at night and turns on to full output when motion is detected, then turns off after a set period of no motion.
• Mode 3 (Constant Light): Light stays on at a constant brightness throughout the night (brightness level may be adjustable depending on model variant). This mode consumes more battery power.
• Anviwònman revèy: Some models may offer timer settings (e.g., 2H, 4H, 6H) to keep the light on for a specific duration after dusk, regardless of motion.

Note: Refer to the remote control's specific button labels for exact functionality. Ensure the remote control has working batteries.

6. Antretyen

Regular maintenance ensures the optimal performance and extends the lifespan of your SSL02 solar light.

• Netwaye Panèl Solè a: Siye sifas panèl solè a detanzantan avèk yon twal mou.amp twal pou retire pousyè, salte, fèy, oswa nèj. Yon panèl pwòp asire maksimòm absòpsyon limyè solèy la ak efikasite chaj.
• Tcheke Montaj: Annually inspect the mounting hardware to ensure it remains secure and free from corrosion. Tighten any loose bolts.
• Ranplasman batri: The SSL02 features a replaceable Li-ion battery. If the light's performance significantly degrades over time (e.g., shorter illumination duration), the battery may need replacement. Consult a qualified technician or contact customer support for guidance on battery replacement.
• Faktè anviwònman: In areas with heavy snowfall or extreme weather, ensure the light is not obstructed or damaged. Clear snow from the solar panel promptly.

NAN. Depanaj

If you encounter issues with your SSL02 solar light, refer to the following common problems and solutions:

Si pwoblèm nan pèsiste apre ou fin eseye solisyon sa yo, tanpri kontakte sèvis kliyan.

8. Espesifikasyon

9. Garanti ak sipò

Pwodui sa a vini ak yon garanti manifakti estanda. Tanpri gade kat garanti ki enkli nan pake ou a pou tèm ak kondisyon espesifik yo, ki gen ladan peryòd garanti a ak detay sou pwoteksyon an.

Sipò pou Kliyan

For technical assistance, troubleshooting not covered in this manual, or warranty claims, please contact our customer support team. Have your product model number (SSL-02) and purchase information ready when contacting support.

Contact information (e.g., website, email, phone number) would typically be provided here by the manufacturer.