Entwodiksyon
This manual provides comprehensive instructions for the installation, operation, and maintenance of your ECCO LED Beacon, Model 6267R. This medium profile beacon is designed for industrial and safety applications, operating within a 12-80VDC range and featuring PULSE8 flash patterns. Please read this manual thoroughly before installation and operation to ensure proper function and safety.
Enfòmasyon sou Sekirite
AVÈTISMAN: Pwodui sa a ka ekspoze w a pwodui chimik tankou plon, ke Eta Kalifòni konnen ki lakòz kansè ak domaj nesans oswa lòt pwoblèm repwodiktif. Pou plis enfòmasyon, ale nan www.P65Warnings.ca.gov.
- Toujou dekonekte kouran an anvan enstalasyon, antretyen oswa depanaj.
- Asire bon voltage (12-80VDC) is supplied to the beacon. Incorrect voltage ka domaje inite a.
- Mount the beacon securely to prevent vibration or detachment during operation.
- Do not look directly into the LED light source when operating, as it may cause eye strain or temporary vision impairment.
- This product is intended for professional installation and use.
Kontni pake
Verifye ke tout atik yo prezan epi yo pa domaje lè w ap ouvri pake a:
- ECCO LED Beacon (Model 6267R)
- Materyèl pou monte (vis, rondelle, nwa)
- Manyèl Enstriksyon (dokiman sa a)
Enstalasyon ak Enstalasyon
The ECCO 6267R beacon is designed for permanent mounting. Follow these steps for secure installation:
- Chwazi Kote Montaj: Select a flat, stable surface capable of supporting the beacon's weight and resisting vibration. Ensure the location provides clear visibility of the beacon.
- Twou pou fè egzèsis: Use the beacon's base as a template to mark and drill appropriate holes for the mounting hardware. Ensure holes are sized correctly for the provided screws.
- Secure the Beacon: Place the beacon over the drilled holes. Insert the mounting screws through the base and secure with washers and nuts from underneath. Tighten firmly but do not overtighten.
- Fil elektrik:
- Konekte a fil wouj to the positive (+) 12-80VDC power source.
- Konekte a fil nwa to the negative (-) ground.
- Asire ke tout koneksyon yo an sekirite ak izole pou anpeche sikui kout.
- Fonksyonalite tès: Once wired, apply power to the beacon to verify proper operation.
Image: The ECCO LED Beacon (Model 6267R) showing its compact, medium profile design, typically mounted on a flat surface. This image illustrates the beacon's physical appearance and size.
Enstriksyon Operasyon
The ECCO 6267R beacon operates automatically once power is supplied. It features a single, fixed PULSE8 flash pattern.
- Pouvwa sou: Apply 12-80VDC power to the beacon. The beacon will immediately begin flashing its PULSE8 pattern.
- Pouvwa Off: Disconnect power to turn off the beacon.
- There are no user-adjustable settings or flash pattern selections on this model.
Antretyen
The ECCO LED Beacon 6267R requires minimal maintenance due to its durable LED design.
- Netwayaj: Periodically clean the outer lens with a soft, damp cloth and mild soap solution. Avoid abrasive cleaners or solvents that could damage the lens.
- Enspeksyon: Regularly inspect the mounting hardware and wiring for any signs of loosening, corrosion, or damage. Tighten connections as needed.
- Lonjevite LED: LEDs have a long lifespan and typically do not require replacement. If the beacon fails to illuminate, refer to the Troubleshooting section.
Depanaj
| Pwoblèm | Kòz posib | Solisyon |
|---|---|---|
| Beacon does not illuminate. | Pa gen pouvwa oswa vol pa kòrèktage. Loose or corroded wiring connection. Konpozan entèn ki domaje. | Verify power supply (12-80VDC) is active. Tcheke tout koneksyon fil elektrik yo pou wè si yo sere epi si gen korozyon. If power and connections are good, the unit may require replacement. |
| Beacon flashes erratically or dimly. | Insufficient or fluctuating voltage. Partial short circuit. | Ensure stable power supply within the specified voltage ranje. Inspect wiring for any damage or exposed wires that could cause a partial short. |
| Beacon makes unusual noise. | Montaj ki lach. Pwoblèm konpozan entèn. | Check and tighten all mounting hardware. If noise persists, the unit may have an internal fault and require replacement. |
Espesifikasyon
| Karakteristik | Detay |
|---|---|
| Nimewo Modèl | 6267R |
| Mak | ECCO |
| Kalite sous limyè | Dyòd emisyon limyè (LED) |
| Voltage Range | 12-80VDC |
| Flash Modèl | PULSE8 (Fixed) |
| Profile | Mwayen |
| Pwa atik | 1 liv |
| Style | Modèn |
| Batri enkli | Non |
Garanti ak sipò
For warranty information and technical support, please contact ECCO customer service or visit the official ECCO websit la. Kenbe resi acha ou kòm prèv acha pou reklamasyon garanti.
- Manifakti: Ecco
- Dat premye disponib: 10 me 2017
- Kontakte: Refer to ECCO's official websit la pou jwenn enfòmasyon kontak ak resous sipò ki pi resan yo.
