BRESSER Temeo Quadro Temperature Station User Manual

Entwodiksyon

The BRESSER Temeo Quadro Temperature Station is designed to monitor temperature and humidity at up to four different locations simultaneously. This system includes a main display unit and three remote sensors, allowing you to track environmental conditions both indoors and outdoors, or in various rooms of your home. The remote sensors transmit data wirelessly to the main unit via a 433 MHz radio signal.

Enfòmasyon sou Sekirite

• Li tout enstriksyon yo ak anpil atansyon anvan ou sèvi ak aparèy la.
• Kenbe manyèl sa a pou referans nan lavni.
• Pa ekspoze aparèy la nan tanperati ekstrèm, limyè solèy dirèk, oswa imidite ki wo.
• Evite jete oswa sibi aparèy la nan gwo enpak.
• Pa eseye demonte oswa repare aparèy la tèt ou. Kontakte pèsonèl sèvis kalifye.
• Jete pil yo itilize yon fason responsab selon règleman lokal yo.

Kontni pake

• 1x BRESSER Temeo Quadro Main Display Unit
• 3x Remote Sensors
• 1x Manyèl Itilizatè (dokiman sa a)

Note: Batteries are not included. The main unit requires 3x AAA (LR03) batteries, and each remote sensor requires 2x AAA (LR03) batteries.

Pwodwi souview

Inite ekspozisyon prensipal la

Imaj: Devan view of the BRESSER Temeo Quadro main unit display. A clear view of the main unit's LCD screen, showing temperature and humidity values for four channels.

Imaj: Dèyè view of the BRESSER Temeo Quadro main unit, showing control buttons and battery compartment. The back of the main unit includes buttons for 'CHANNEL', 'ALARM', 'MAX/MIN', and 'SET', along with the battery compartment cover.

• Ekspozisyon LCD: Shows temperature and humidity for the main unit (IN) and up to three remote sensors (1, 2, 3).
• Bouton CHANÈL: Selects which remote sensor's data is displayed or cycles through channels.
• Bouton ALAM: Activates/deactivates temperature/humidity alarms.
• Bouton MAX/MIN: Montre valè maksimòm ak minimòm ki anrejistre yo.
• SET bouton: Enters setup mode for time, date, and alarm settings.
• Lòj batri: Located on the rear, for 3x AAA batteries.
• Kanpe entegre: Pou plasman sou biwo.

Capteur Remote

Imaj: BRESSER Temeo Quadro remote sensor, front and back views. A remote sensor unit, showing its display on the front and the battery compartment and mounting hole on the back.

• Ekspozisyon LCD: Shows its current temperature and humidity.
• Chanjman chanèl: Allows selection of channel 1, 2, or 3.
• Lòj batri: For 2x AAA batteries.
• Twou Montaj: Pou aliye miray la.

Enstalasyon

1. Enstalasyon batri

1. For Remote Sensors:
   • Louvri kouvèti konpatiman pil la ki sou dèyè chak detèktè remote.
   • Insert 2x AAA (LR03) batteries into each sensor, observing the correct polarity (+/-).
   • Set the channel switch (1, 2, or 3) on each sensor to a unique channel.
   • Fèmen kouvèti lòj batri a.
2. For Main Display Unit:
   • Louvri kouvèti konpatiman batri a ki sou dèyè inite prensipal la.
   • Insert 3x AAA (LR03) batteries, observing the correct polarity (+/-).
   • Close the battery compartment cover. The main unit will power on and begin searching for sensor signals.

2. Koneksyon Capteur

• After installing batteries in both the sensors and the main unit, the main unit will automatically attempt to connect with the remote sensors.
• Ensure the remote sensors are within range (typically up to 30 meters in open air) of the main unit during initial setup.
• The corresponding channel numbers (1, 2, 3) on the main unit's display will show readings once a connection is established. The 'IN' channel displays the main unit's internal readings.
• If a sensor does not connect, remove and reinsert its batteries, then press the 'CHANNEL' button on the main unit to initiate a new search.

3. Plasman

• Place the main unit indoors in a central location, away from direct sunlight or heat sources.
• Position remote sensors in desired monitoring areas. For outdoor use, place sensors in a sheltered spot to protect them from direct rain and sun, which can affect accuracy and device longevity.

Enstriksyon Operasyon

Viewing Tanperati ak Imidite

• The main display unit continuously shows the current temperature and humidity for the internal sensor ('IN') and the three remote sensors (1, 2, 3).
• The display also indicates comfort levels (e.g., 'COM' for comfortable, 'DRY' for dry, 'WET' for wet) based on humidity levels.

MAX/MIN Records

• Peze a MAX/MIN button once to display the maximum temperature and humidity recorded since the last reset.
• Peze a MAX/MIN button a second time to display the minimum temperature and humidity recorded.
• Pou efase anrejistreman MAX/MIN yo, peze epi kenbe bouton an MAX/MIN button for approximately 3 seconds while MAX or MIN values are displayed.

Seleksyon Inite Tanperati (°C/°F)

• Sou inite prensipal la, peze bouton an SET button to toggle between Celsius (°C) and Fahrenheit (°F).

Setting Alarms (if applicable)

• Peze a ALAM bouton pou antre nan mòd anviwònman alam.
• Sèvi ak la CHANNEL epi MAX/MIN buttons to adjust the desired high and low temperature/humidity alarm thresholds for each channel.
• Peze ALAM again to confirm settings and activate the alarm. An alarm icon will appear on the display.
• When an alarm threshold is met, the unit will emit an audible alert and the corresponding channel's reading will flash.

Antretyen

• Netwayaj: Siye aparèy la ak yon mou, damp twal. Pa sèvi ak pwodui netwayaj abrazif oswa solvang.
• Ranplasman batri: Replace batteries when the low battery indicator appears on the display. Always replace all batteries in a unit at the same time.
• Depo: Si w ap sere aparèy la pou yon bon bout tan, retire tout pil yo pou anpeche likid koule.

Depanaj

Espesifikasyon

Garanti

This BRESSER product comes with a de ane garanti against factory defects from the date of purchase. Please retain your proof of purchase for warranty claims. The warranty does not cover damage caused by improper use, accidents, unauthorized repairs, or normal wear and tear.

Sipò

For technical support, warranty claims, or further information, please visit the official BRESSER website or contact their customer service department. Refer to the packaging or the BRESSER websit la pou jwenn enfòmasyon kontak ki pi resan yo.

Online resources may include FAQs, additional manuals, and contact forms.