Futaba 3PV Three-Channel 2.4GHz Computerized Radio Control Surface Transmitter

1. Pwodwi souview

The Futaba 3PV is a versatile three-channel 2.4 Gigahertz computerized radio control surface transmitter designed for various RC surface models. It supports FHSS, S-FHSS, and T-FHSS protocols, offering broad compatibility and advanced features. This system includes the R304SB T-FHSS Telemetry Receiver, which provides real-time feedback on critical parameters such as transmitter and receiver voltage.

Key features include a large, easy-to-read display screen for intuitive menu navigation, and conveniently positioned digital trims for steering, throttle, and steering dual rate. The transmitter is powered by four 'AA' batteries (not included), which can be alkaline, Nickel-Metal Hydride, or a lithium pack.

Image 1.1: The Futaba 3PV Three-Channel 2.4GHz Computerized Radio Control Surface Transmitter.

2. Enstalasyon

2.1 Enstalasyon batri

The 3PV transmitter requires four 'AA' size batteries. These can be alkaline, Nickel-Metal Hydride (NiMH), or a compatible lithium pack. Ensure correct polarity when inserting batteries.

1. Locate the battery compartment cover on the base of the transmitter.
2. Slide the cover open or remove it according to the markings.
3. Insert four 'AA' batteries, observing the polarity (+/-) indicators inside the compartment.
4. Ranplase kouvèti lòj batri a byen.

Image 2.1: Open battery compartment showing battery holder for four 'AA' batteries.

2.2 Receiver Binding (Linking)

To establish communication between the 3PV transmitter and the R304SB receiver, they must be linked (bound). This process ensures that your transmitter only controls your specific receiver.

1. Limen transmetè a.
2. Connect a battery to the receiver and turn it on. The receiver's LED will blink.
3. Press and hold the Link button on the receiver for approximately 2 seconds. The LED will change from blinking to solid green, indicating successful binding.
4. Release the Link button.
5. Turn off both the transmitter and receiver, then turn them back on to confirm the link. The receiver's LED should immediately be solid green.

Note: Refer to the detailed receiver manual for specific binding procedures if issues arise.

3. Operasyon Enstriksyon

3.1 Kontwòl debaz yo

The 3PV transmitter features standard surface radio controls for intuitive operation.

• Volan: Controls the direction of your vehicle. Turning the wheel left or right will steer the model accordingly.
• Deklanche gaz: Controls the speed and direction (forward/reverse) of your vehicle. Pulling the trigger back increases forward speed, pushing it forward activates the brake or reverse.
• Digital Trims: Small buttons located around the steering wheel for fine-tuning steering, throttle, and steering dual rate. These allow for precise adjustments without affecting the main control inputs.

Imaj 3.1: Gwo plan view of the steering wheel and digital trim buttons.

3.2 Display Screen and Menu Navigation

The large LCD screen provides access to various settings and telemetry data. Navigation is typically done using the buttons below the screen.

• Aksè nan meni: Press the designated menu button (refer to the screen labels) to enter the main menu.
• Navigasyon: Use the arrow buttons to scroll through menu options.
• Selection/Adjustment: Press the enter button to select an option or confirm a setting. Use the +/- buttons to adjust values.

Image 3.2: The 3PV's large screen displaying various settings and telemetry information.

3.3 Telemetry Functions

The included R304SB T-FHSS receiver supports telemetry, allowing you to monitor real-time data from your model directly on the transmitter's screen. The primary telemetry function is monitoring transmitter and receiver voltage.

• Transmetè Voltage (TX V): Montre vol aktyèl latage of the batteries powering your 3PV transmitter.
• Reseptè Voltage (RX V): Montre vol aktyèl latage supplied to your R304SB receiver in the model.

Monitoring these values helps ensure your system has adequate power during operation and can alert you to low battery conditions.

4. Antretyen

Proper maintenance ensures the longevity and reliable performance of your Futaba 3PV system.

• Netwayaj: Use a soft, dry cloth to clean the transmitter and receiver. Avoid using solvents or harsh chemicals, as they may damage the plastic or electronic components.
• Depo: Store the transmitter and receiver in a cool, dry place, away from direct sunlight and extreme temperatures. Remove batteries from the transmitter if it will not be used for an extended period to prevent leakage.
• Swen batri: Always use fresh batteries or fully charged rechargeable batteries. Do not mix old and new batteries, or different types of batteries.
• Enspeksyon: Periodically inspect all cables and connectors for signs of wear or damage. Ensure the antenna is not bent or broken.

NAN. Depanaj

This section addresses common issues you might encounter with your Futaba 3PV system.

6. Espesifikasyon

Image 6.1: Dimensions of the Futaba 3PV transmitter.

7. Garanti ak sipò

Futaba products are manufactured to high standards and are backed by a manufacturer's warranty. For specific warranty terms, duration, and conditions, please refer to the documentation included with your product or visit the official Futaba websit.

For technical support, service, or inquiries regarding your Futaba 3PV system, please contact Futaba customer service directly. Contact information can typically be found on the manufacturer's websit oswa nan anbalaj pwodwi a.

Tanpri kenbe prèv ou achte pou reklamasyon garanti.