Manyèl Itilizatè Ouvrè Pòtay Glisman BENINCA Bull 424R

1. Entwodiksyon

This manual provides detailed instructions for the installation, operation, and maintenance of your BENINCA Bull 424R Sliding Gate Opener. The Bull 424R is a silent, powerful, and reliable 24VDC operator designed for intensive use with sliding gates. It features an LCD display for easy programming, internal limit-switches, and multiple electronic settings for torque and timing adjustments.

Please read this manual thoroughly before beginning installation or operation to ensure safe and correct use of the product.

2. Enfòmasyon sou Sekirite

AVÈTISMAN: Si ou pa swiv enstriksyon sekirite sa yo, ou ka blese gravman oswa domaje materyèlman.

• Installation must be performed by qualified personnel in compliance with local safety regulations.
• Ensure the power supply is disconnected before performing any installation, maintenance, or repair work.
• Keep hands, feet, and clothing clear of the gate and opener mechanism during operation.
• Pa kite timoun yo jwe ak oswa opere kontwòl ouvè baryè a.
• Enspekte baryè a ak ouvè pòt la regilyèman pou wè si gen siy itilizasyon, domaj oswa move aliyman.
• Ensure all safety devices (e.g., photocells, safety edges) are correctly installed and functioning.

3. Pake kontni

Verifye ke tout konpozan ki nan lis anba a yo prezan nan pake ou a:

• BENINCA Bull 424R Sliding Gate Opener Unit
• Control Panel (integrated)
• Inite reseptè
• De (2) kontwòl remote
• Five (5) sections of 39-inch Rack Gear
• Installation Hardware (bolts, nuts, washers - specific quantities may vary)
• Manyèl Itilizatè (dokiman sa a)

Figure 3.1: Complete BENINCA Bull 424R Sliding Gate Opener kit components.

4. Enstalasyon ak Enstalasyon

4.1 Enstalasyon mekanik

1. Monte ouvriye a: Securely mount the BENINCA Bull 424R motor unit on a stable, level concrete base next to the gate, ensuring proper alignment with the gate's movement path.
2. Installing the Rack Gear: Attach the rack gear sections along the bottom edge of the sliding gate. Ensure the rack meshes correctly with the opener's pinion gear, maintaining a small clearance (approximately 1-2mm) to prevent binding.
3. Ajisteman switch limit: Adjust the internal limit switches to define the gate's fully open and fully closed positions. Refer to the control panel's specific instructions for precise adjustment.

4.2 Koneksyon elektrik

Tout koneksyon elektrik ta dwe fèt pa yon elektrisyen kalifye.

1. Pwovizyon pou pouvwa: Connect the 24VDC power supply to the designated terminals on the control board. Ensure correct polarity.
2. Aparèy sekirite: Connect any external safety devices, such as photocells or safety edges, to their respective terminals on the control board.
3. Inite reseptè: Connect the included receiver unit to the control board. This unit allows the remote controls to operate the gate.

Figure 4.1: BENINCA Receiver and Remote Control Kit.

4.3 Programming the Control Panel and Remotes

The BENINCA Bull 424R features an LCD display for easy programming and digital adjustment of torque and timing.

1. Premye pouvwa-up: After all electrical connections are made, apply power to the unit. The LCD display will illuminate.
2. Aksè nan meni: Use the control panel buttons (usually labeled MENU, UP, DOWN, ENTER) to navigate the programming menu.
3. Learning Remote Controls: Follow the on-screen instructions to program the remote controls. Typically, this involves selecting a "Learn Remote" option and pressing a button on each remote control.
4. Ajisteman paramèt: Utilize the menu to set parameters such as motor torque, gate speed, automatic closing time, and obstacle detection sensitivity.

Figure 4.2: BENINCA Remote Control.

5. Operasyon Enstriksyon

Once installed and programmed, operating your BENINCA Bull 424R gate opener is straightforward.

5.1 Sèvi ak kontwòl remote la

• Press the designated button on your remote control once to open the gate.
• Press the button again while the gate is moving to stop it.
• Press the button a third time to reverse the gate's direction (if stopped mid-cycle) or to close it (if fully open).

5.2 Manyèl Liberasyon

In case of power failure or malfunction, the gate can be operated manually. Locate the manual release mechanism on the motor unit (refer to the specific diagram in your product's quick start guide for exact location). Engage the release mechanism to disengage the motor, allowing the gate to be moved by hand.

6. Antretyen

Regular maintenance ensures the longevity and reliable operation of your gate opener.

• Chak mwa: Inspect the gate's movement for any obstructions. Check the rack gear for debris and ensure it is securely fastened.
• Chak trimès: Lubricate the gate's wheels, hinges, and any moving parts as recommended by the gate manufacturer. Check the condition of the power cable and all electrical connections.
• Chak ane: Have a qualified technician inspect the entire system, including the motor, control board, safety devices, and gate structure, for wear or damage.

CAUTION: Always disconnect power to the unit before performing any maintenance.

NAN. Depanaj

This section addresses common issues you might encounter with your BENINCA Bull 424R gate opener.

8. Espesifikasyon

Key technical specifications for the BENINCA Bull 424R Sliding Gate Opener:

• Modèl: BENINCA Bull 424R
• Manifakti: Beninca
• Kalite motè: 24VDC
• Kontwòl Panel: Entegre ak ekspozisyon LCD
• Limit switch: Entèn
• Pwogramasyon: Digital adjustment for torque and timing
• ASIN: B01FG7NE18
• Dat premye disponib: 22 avril 2018

9. Garanti ak sipò

For warranty information and technical support, please refer to the documentation provided with your purchase or contact your authorized BENINCA dealer. Keep your purchase receipt as proof of purchase.

For further assistance, you may visit the official BENINCA websit oswa kontakte depatman sèvis kliyan yo.