Garrett ACE 400i Metal Detector User Manual

1. Entwodiksyon

The Garrett ACE 400i is an advanced metal detector designed for hobbyists and enthusiasts. It builds upon the success of previous ACE models, offering enhanced features for improved target identification and detection depth. This manual provides comprehensive instructions for assembling, operating, and maintaining your ACE 400i to ensure optimal performance and longevity.

Karakteristik kle yo enkli:

• Target Conductivity Indication: A numerical display (1-100) helps identify the probable nature of the target.
• Iron Audio: Allows users to hear discriminated ferrous targets, aiding in distinguishing valuable items from trash.
• Increased Frequency (10 kHz): Provides enhanced detection depth and sensitivity to smaller targets.
• Ajisteman Frekans: Helps eliminate interference when detecting near other metal detectors or electrical sources.
• Notch Diskriminasyon: Customize discrimination patterns to ignore unwanted metals.
• Pinpoint Function: Precisely locate targets for easier recovery.
• Konsepsyon ki lejè: Weighing approximately 1.32 kg, it is comfortable for extended use.

Figure 1: The Garrett ACE 400i Metal Detector, fully assembled. This image shows the main components including the search coil, shaft, control box, and arm cuff.

2. Enfòmasyon sou Sekirite

Always exercise caution when operating the metal detector to prevent injury or damage to the device. Adhere to the following safety guidelines:

• Avoid using the detector near active electrical lines or in adverse weather conditions.
• Be aware of your surroundings, especially when digging.
• Sipèvize timoun yo pandan operasyon an.
• Do not attempt to detect in areas where digging is prohibited or dangerous.
• Always obtain permission before detecting on private property.

3. Konpozan enkli

Your Garrett ACE 400i package typically includes the following components:

• Garrett ACE 400i Control Box with Shaft
• 18 x 26 cm (7" x 10") PROformance™ DD Search Coil
• Search Coil Cover
• Garrett ClearSound Easy Stow Headphones
• Garrett ACE Environmental Cover-Up (Rain Cover for Control Box)
• AA Batteries (4 required, may or may not be included depending on region/seller)
• Manyèl Itilizatè (dokiman sa a)

Figure 2: Garrett ClearSound Easy Stow Headphones, included with the detector for clear audio signals.

Figure 3: The protective cover for the search coil, designed to prevent scratches and wear during use.

4. Asanble ak Enstalasyon

Follow these steps to assemble your Garrett ACE 400i metal detector:

1. Atache bobin rechèch la:

   Align the search coil with the lower stem. Insert the plastic bolt through the holes on the coil and stem, then secure it with the wing nut. Ensure the coil cable is wrapped snugly around the lower and middle stems.

   

   Figure 4: The DD search coil, which attaches to the lower shaft of the detector.

2. Connect the Control Box:

   Slide the control box onto the upper shaft. Secure it using the provided cam-locks. The new cam-lock rings prevent movement and play over time.

   

   Figure 5: The control box attached to the upper shaft, showing the arm cuff and handle.
3. Mete pil:

   Open the battery compartment on the control box. Insert four (4) AA batteries, ensuring correct polarity. Close the compartment securely.

4. Adjust Length and Arm Cuff:

   Adjust the length of the shaft to a comfortable height, allowing the search coil to be parallel to the ground when you are standing upright. Adjust the arm cuff for a snug but comfortable fit on your forearm.

5. Connect Coil Cable:

   Plug the search coil cable connector into the corresponding port on the control box. Ensure a secure connection.

5. Operasyon Enstriksyon

Familiarize yourself with the control panel and its functions before beginning your search.

Figure 6: Close-up of the Garrett ACE 400i control panel, showing the LCD screen and various buttons.

5.1. Powering On / Off

Peze epi kenbe la POUVWA button to turn the detector on or off. The detector will power on in the last used search mode.

5.2. Understanding the Display (LCD)

The large LCD screen provides crucial information:

• Kisè ID Sib: Indicates the probable target type (e.g., Iron, Foil, Nickel, Zinc, Copper, Silver).
• Digital Target ID (1-100): A numerical value representing the target's conductivity. Higher numbers indicate more conductive targets (e.g., silver coins), while lower numbers indicate less conductive targets (e.g., iron).
• Endikatè pwofondè: Estimates the depth of the target in centimeters (5cm, 10cm, 15cm, 20+cm).
• Endikatè nivo batri: Montre dire lavi batri ki rete a.
• Endikatè sansiblite: Displays the current sensitivity setting.

5.3. Search Modes

The ACE 400i features five pre-programmed search modes. Press the MÒD bouton pou chanje yo youn apre lòt:

• Zero-Disc: All-metal mode. Detects all types of metal without discrimination.
• Bijou: Designed to ignore iron and small trash items, focusing on jewelry.
• Custom: Allows you to create and save your own discrimination pattern. Use the DISKRI epi V/X buttons to adjust the NOTCH segments.
• pyès monnen: Optimized for coin hunting, typically discriminating against iron and some foil.
• Relics: Designed to find relics, often with minimal iron discrimination, as many historical artifacts contain iron.

5.4. Ajisteman sansiblite

Sèvi ak la SENSIBITE bouton (+ epi -) to adjust the detector's sensitivity. Higher sensitivity increases detection depth but can also lead to more false signals in mineralized ground or areas with electrical interference. Adjust as needed for stable operation.

5.5. Discrimination (NOTCH and Iron Audio)

• NOTCH Discrimination: In Custom mode, you can eliminate specific target segments from detection. Use the DISKRI button to move the cursor and V/X to toggle segments on/off.
• Iron Audio: Peze a IRON ODYO button to activate this feature. It allows you to hear discriminated iron targets at a low tone, even when they are notched out. This helps in identifying complex targets (e.g., a valuable non-ferrous target next to iron) and avoiding large iron objects.

5.6. Ajisteman Frekans

The ACE 400i operates at 10 kHz. If you experience interference from other detectors or electrical sources, press the FREQ ADJ button to slightly shift the operating frequency, which can help mitigate interference.

5.7. Fonksyon Pinpoint

Yon fwa ou detekte yon sib, peze epi kenbe bouton an PINPOINT button (target icon). Keep the coil steady over the target. The detector will emit a continuous tone, and the signal strength indicator on the LCD will help you center the coil directly over the target for precise location.

6. Antretyen

• Netwayaj: Siye detektè a ak piblisiteamp cloth after each use. Do not use abrasive cleaners or solvents. The control box is rain-resistant but not submersible.
• Coil Care: Always use the search coil cover to protect the coil from scratches and impacts.
• Ranplasman batri: Replace batteries when the low battery indicator appears. Remove batteries if storing the detector for extended periods to prevent leakage.
• Depo: Store the detector in a cool, dry place. Avoid extreme temperatures.

NAN. Depanaj

8. Espesifikasyon

9. Garanti ak sipò

For detailed warranty information, please refer to the official Garrett Metal Detectors website or contact your authorized dealer. Warranty terms and conditions may vary by region.

For technical support, troubleshooting assistance, or spare parts, please contact Garrett Customer Service through their official channels. Always provide your product model (ACE 400i) and serial number when seeking support.

Videyo pwodwi ofisyèl yo: Pa gen okenn videyo pwodwi ofisyèl nan men vandè a ki te disponib pou entegre nan manyèl sa a.