1. Entwodiksyon
This manual provides essential information for the safe and efficient operation, assembly, and maintenance of your JET JWDP-12 12-Inch Benchtop Variable Speed Drill Press. Please read all instructions thoroughly before initial use to ensure proper function and to prevent injury or damage to the machine.
The JET JWDP-12 is a versatile benchtop drill press featuring a 1/2 HP induction motor, variable speed control from 530 to 3,100 RPM, and a compact cast iron base. It is designed for precision drilling tasks in various materials, offering features like an X-shaped XACTA Laser for accuracy, an LED work light, and a linear depth stop.
2. Enstriksyon Sekirite
WARNING: Always follow basic safety precautions to reduce the risk of fire, electric shock, or personal injury.
- Li Manyèl la: Understand all operating instructions and warnings before using the drill press.
- Mete pwoteksyon pou je: Always wear ANSI-approved safety goggles or a face shield.
- An sekirite pou pyès travay la: Sèvi ak clamps or a vise to firmly secure the workpiece to the drill press table. Never hold the workpiece by hand.
- Zòn Travay Klè: Kenbe zòn travay la pwòp, byen limen, epi san dezord.
- Vètman apwopriye: Do not wear loose clothing, gloves, neckties, rings, bracelets, or other jewelry that could get caught in moving parts. Tie back long hair.
- Kenbe balans: Kenbe bon pye ak balans tout tan.
- Evite twòp: Pa depase.
- Dekonekte pouvwa: Always disconnect the drill press from the power source before making adjustments, changing accessories, or performing maintenance.
- Sèvi ak vitès ki kòrèk la: Select the appropriate RPM for the drill bit size and material being drilled.
- Enspekte anvan w itilize: Tcheke pou wè si gen pyès ki domaje, move aliyman, pyès k ap deplase ki bloke, pyès ki kase, ak nenpòt lòt kondisyon ki ka afekte fonksyònman li.
- Kenbe gad yo an plas: Ensure all guards are properly installed and functioning before operation.
3. Konpozan ak Asanblaj
The JET JWDP-12 drill press is designed for straightforward assembly. Ensure all components listed below are present before beginning assembly. Refer to the detailed assembly instructions provided with your product for step-by-step guidance.
Eleman ki enkli:
- Tèt Asanble
- Tablo
- Table Arm & Support Assembly
- Baz
- Column and Rack Assembly
- Manch (x4)
- Arbor
- Drift kle
- Sou entènèt jwèt Chuck Key
- Lock Handles (x2)
- Materyèl
- Kle (x2)
Figi 1: Plis paseview of the JET JWDP-12 Benchtop Drill Press with key features labeled.
4. Operasyon Enstriksyon
4.1 Power On/Off
To power on the drill press, lift the yellow safety cover and press the green 'ON' button. To power off, press the red 'OFF' button or push down the yellow safety cover.
Figure 2: Digital RPM readout and power controls for the drill press.
4.2 Adjusting Speed (RPM)
The drill press features a variable-speed system. Use the speed adjustment lever to smoothly change the spindle RPM from 530 to 3,100. The current RPM is displayed on the high-visibility digital readout.
4.3 Using the XACTA Laser
The innovative X-shaped XACTA Laser ensures drilling accuracy by projecting a crosshair onto the workpiece, indicating the exact point of drill bit contact. Activate the laser using its dedicated switch on the control panel.
Figure 3: The XACTA Laser provides precise targeting for drilling operations.
4.4 Setting Drilling Depth
Utilize the clear linear scale with depth stop for consistent drilling depths. Adjust the stop collar to the desired depth, ensuring repeatable results for multiple holes.
Figure 4: Linear scale and depth stop for precise depth control.
4.5 Ajisteman Tablo
The 10" x 16-1/8" cast iron table can be adjusted for height and angle. Use the crank handle to raise or lower the table. The table also tilts 45 degrees left and right for angled drilling. The retractable roller extension provides additional support for larger workpieces.
Figure 5: The drill press table can be tilted for angled drilling.
Figure 6: Retractable roller extension for supporting longer workpieces.
5. Antretyen
Regular maintenance ensures the longevity and optimal performance of your JET JWDP-12 drill press.
- Netwayaj: Keep the machine clean and free of dust and debris. Use a brush or vacuum to remove wood chips and metal shavings.
- Lubrifikasyon: Periodically lubricate moving parts such as the column, rack, and quill with appropriate machine oil.
- Tansyon senti: Check the drive belt tension regularly and adjust if necessary to prevent slippage and ensure consistent speed.
- Enspeksyon Mandren: Inspect the chuck for wear or damage. Ensure it holds drill bits securely.
- Koneksyon elektrik: Tcheke tout koneksyon elektrik yo detanzantan pou wè si yo sere epi si gen siy itilizasyon.
NAN. Depanaj
| Pwoblèm | Kòz posib | Solisyon |
|---|---|---|
| Près perçage a pa kòmanse | Pa gen kouran, disjonktè deklanche, switch ki gen pwoblèm | Check power supply, reset breaker, inspect switch. |
| Twòp Vibration | Loose components, unbalanced drill bit, worn bearings | Tighten fasteners, replace drill bit, inspect bearings. |
| Foraj ki pa egzak | Loose chuck, misaligned laser, worn drill bit | Tighten chuck, calibrate laser, replace drill bit. |
| Surchof motè | Overload, insufficient ventilation | Reduce load, ensure proper airflow around motor. |
7. Espesifikasyon teknik
| Spesifikasyon | Valè |
|---|---|
| Mak | Jet |
| Nimewo Modèl | JWDP-12 (716000) |
| Sous pouvwa | Fil elektrik |
| Motè puisans | 0.5 HP |
| Voltage | 115 Volts |
| Ampepòk | 5 Amps |
| Maksimòm vitès wotasyon | 3100 RPM |
| Vitès wotasyon minimòm | 530 RPM |
| Vwayaj koton | 3-1/8 pous |
| Gwosè maksimòm Chuck | 13 Millimeters (approx. 1/2 inch) |
| Dimansyon tab la | 10" x 16-1/8" (Cast Iron) |
| Dimansyon pwodwi (L x W x H) | 16.13"L x 10"L x 37"H |
| Pwa atik | 85 liv |
| Materyèl | An fè, asye |
| Karakteristik espesyal | Variable Speed, LED Work Light, XACTA Laser, Depth Stop, Retractable Roller Extension |
| UPC | 731325455885 |
8. Enfòmasyon sou Garanti
The JET JWDP-12 Benchtop Drill Press comes with a 5-ane garanti for residential use. If the product is used for commercial or industrial purposes, the warranty defaults to a 2-ane garanti. Please retain your proof of purchase for warranty claims. For full details, refer to the warranty documentation included with your product or contact JET customer support.
Figure 7: Warranty badge for the JET drill press.
9. Sipò pou Kliyan
For technical assistance, parts, or service, please contact JET Customer Support. Have your model number (JWDP-12) and serial number ready when contacting support. You can find the serial number on the product label, typically located on the motor housing.
Visit the official Jet websit la pou jwenn enfòmasyon kontak ak resous sipò ki pi ajou yo.
