AFUNTA Boruit LED Headlamp CREE XM-L T6 User Manual

Entwodiksyon

Mèsi pou acha aasing the AFUNTA Boruit LED Headlamp. This manual provides essential information for the safe and effective use of your headlampTanpri li l byen anvan ou itilize l epi konsève l pou referans pita.

Enfòmasyon sou Sekirite

• Do not look directly into the LED light when it is on, as it can cause temporary vision impairment or eye damage.
• Kenbe headl laamp soti nan atenn timoun yo.
• Ensure batteries are inserted with correct polarity. Incorrect insertion can damage the device.
• Pa melanje ansyen ak nouvo pil, oswa diferan kalite pil.
• Tèt sa aamp is waterproof, but it is not designed for submersion. Avoid prolonged exposure to heavy rain or water.
• Pa eseye demonte oswa modifye tèt la.amp, as this will void the warranty and may cause damage or injury.

Kontni pake

• AFUNTA Boruit LED Headlamp Inite
• USB Chaje Kab
• Tèt adaptab senti

Note: Batteries (e.g., 18650 type) are typically sold separately and are required for operation.

Pwodwi souview

The AFUNTA Boruit LED Headlamp features a powerful 5000LM output with three CREE XM-L T6 LED lights, offering multiple lighting modes for various outdoor activities. Its waterproof design ensures reliability in diverse weather conditions, and the rechargeable capability provides convenience.

Enstalasyon

1. Enstalasyon batri: Open the battery compartment located at the rear of the headlamp. Insert two 18650 rechargeable batteries (not included) according to the polarity markings (+/-). Close the compartment securely.
2. Ajisteman senti: Mete tèt laamp on your head. Adjust the elastic straps to ensure a comfortable and secure fit. The straps should be snug but not overly tight.
3. Ajisteman Ang: The light unit can be tilted vertically to direct the beam. Adjust the angle to suit your viewing needs. The base of the light unit can move approximately 20 degrees upwards and 90 degrees downwards, with 6 distinct click positions.

Operasyon

Headl laamp features a single power button located on the top of the central light unit. Press the button to cycle through the lighting modes:

1. Premye laprès: Activates the central LED light only.
2. Dezyèm Press: Activates the two side LED lights only.
3. Twazyèm Press: Activates all three LED lights for maximum brightness.
4. Katriyèm Press: Activates the flashing (strobe) mode.
5. Senkyèm laprès: Li vire tèt laamp koupe.

Chaje

Pou chaje headl laamp, connect the provided USB charging cable to the charging port on the headlamp unit. Connect the other end of the USB cable to a compatible USB power source (e.g., a computer USB port, wall adapter, or power bank). An indicator light will typically show the charging status. Ensure the batteries are installed before charging. The headlamp can be charged with the batteries inside.

Antretyen

• Netwayaj: Siye tèt laamp ak yon mou, damp twal. Pa sèvi ak pwodui netwayaj abrazif oswa solvang.
• Depo: When not in use for extended periods, remove the batteries to prevent leakage. Store the headlamp nan yon kote ki fre, sèk lwen limyè solèy la dirèk.
• Swen batri: Use only recommended rechargeable batteries. If the headlamp is used frequently, consider having spare charged batteries available.

Depanaj

Headlamp pa limen:

• Tcheke si pil yo byen mete ak polarite ki kòrèk la.
• Asire w ke pil yo konplètman chaje.
• Verify that the battery compartment is securely closed.
• If the switch appears faulty (e.g., stays dimly lit or doesn't turn off), contact customer support.

Limyè a fèb oswa li tranble:

• Pil yo ka fèb. Rechaje yo oswa ranplase yo.
• Asire ke kontak batri yo pwòp epi yo pa korozyon.

Headlamp does not charge:

• Ensure the USB cable is properly connected to both the headlamp ak sous pouvwa a.
• Eseye yon lòt kab USB oswa sous pouvwa.
• Verify that the batteries are correctly installed.

Espesifikasyon

Garanti ak sipò

For warranty information or technical support, please refer to the documentation included with your purchase or contact the seller directly. Keep your purchase receipt as proof of purchase.