Entwodiksyon
This manual provides essential instructions for the safe and efficient installation, operation, and maintenance of your Zoeller Shark Model 807-0001 Residential Grinder Pump. Please read this manual thoroughly before attempting to install or operate the pump. Retain this manual for future reference.
The Zoeller Shark Model 807-0001 is a 1 HP, 115V residential grinder pump designed for handling wastewater and effluent in residential applications. It features a robust grinding mechanism to reduce solids into a fine slurry, allowing for discharge through small diameter piping.
Enfòmasyon sou Sekirite
WARNING: Risk of electric shock. This pump is supplied with a grounding conductor and grounding-type attachment plug. To reduce the risk of electric shock, be certain that it is connected only to a properly grounded, grounding-type receptacle.
- Toujou dekonekte kouran ponp lan anvan ou manyen oswa fè antretyen.
- Asire w ke tout koneksyon elektrik yo fèt pa yon elektrisyen kalifye epi ke yo konfòm ak kòd lokal yo.
- Pa opere ponp lan nan yon atmosfè eksplozif.
- Mete ekipman pwoteksyon pèsonèl (PPE) ki apwopriye pandan enstalasyon ak antretyen.
- Pwodui sa a gen pwodui chimik ke Eta Kalifòni rekonèt kòm lakòz kansè ak domaj nesans oswa lòt pwoblèm repwodiksyon. (Avètisman Pwopozisyon 65)
Enstalasyon ak Enstalasyon
Proper installation is crucial for the longevity and performance of your grinder pump. Consult a qualified professional for installation if you are unsure.
Debalaj ak enspeksyon
Carefully remove the pump from its packaging. Inspect for any visible damage that may have occurred during shipping. Report any damage to your supplier immediately.
Figure 1: Zoeller Shark Model 807-0001 Residential Grinder Pump. This image shows the complete pump unit with its float switch mechanism.
Location and Sump Requirements
- The pump must be installed in a properly sized and vented sump or basin.
- Ensure the sump is free of debris before placing the pump.
- The pump should be placed on a solid, level surface at the bottom of the sump.
Koneksyon kanalizasyon
- Connect the discharge piping to the pump's outlet. Ensure all connections are watertight.
- Enstale yon valv anti-retou nan liy egzeyat la pou anpeche refoulement.
- A shut-off valve is recommended for ease of maintenance.
Koneksyon elektrik
- The pump requires a 115V, 60 Hz, single-phase power supply.
- Connect the pump to a dedicated, properly grounded circuit with appropriate overcurrent protection.
- Ensure the float switch is installed and adjusted correctly to control pump cycles.
Enstriksyon Operasyon
Once installed and connected, the Zoeller Shark Model 807-0001 operates automatically via its float switch.
Inisyal Start-up
- Ensure all piping and electrical connections are secure.
- Slowly fill the sump with water to activate the float switch.
- Observe the pump for proper operation: it should turn on, pump down the water, and then turn off.
- Check for any leaks in the discharge piping.
Operasyon nòmal
The pump will activate when the water level rises to the "on" level set by the float switch and will continue to run until the water level drops to the "off" level. The grinding mechanism processes solids before pumping.
Figi 2: Close-up view of the Zoeller Shark Grinder Pump's impeller and grinding plate. This mechanism is responsible for reducing solids in wastewater.
Antretyen
Regular maintenance helps ensure reliable operation and extends the life of your pump.
Routine Checks (Monthly)
- Enspeksyon vizyèl: Check the pump and sump for any unusual debris, blockages, or signs of wear.
- Flote switch: Leve epi desann switch flote a manyèlman pou asire li deplase lib epi aktive ponp lan kòrèkteman.
- Liy Egzeyat: Listen for any unusual noises or signs of obstruction in the discharge line.
Annual Inspection (Professional Recommended)
- Inspect the grinding mechanism for wear.
- Check motor windings and electrical connections.
- Clean the sump basin byen.
ATANSYON: Toujou dekonekte kouran an anvan ou fè nenpòt antretyen oswa enspeksyon.
Depanaj
This section provides solutions to common issues. For problems not listed, contact customer support.
| Pwoblèm | Kòz posib | Solisyon |
|---|---|---|
| Ponp pa kouri | No power; tripped breaker; faulty float switch; motor overload. | Check power supply and breaker. Inspect float switch for obstruction. Reset thermal overload if present. |
| Ponp kouri kontinyèlman | Stuck float switch; check valve failure; discharge line blockage. | Clear float switch. Inspect/replace check valve. Clear discharge line. |
| Pump runs but no water is discharged | Air lock; clogged impeller/grinder; discharge line blockage. | Vent air from pump. Clear impeller/grinder. Clear discharge line. |
| Twòp bri oswa Vibration | Debri nan ponp lan; kousinen ki ize; move enstalasyon. | Disconnect power and inspect for debris. Contact service professional for worn parts. |
Espesifikasyon
| Karakteristik | Detay |
|---|---|
| Nimewo Modèl | 807-0001 |
| Mak | Zoeller |
| Puissance | 1 HP |
| Voltage | 115 Volts |
| Sous pouvwa | AC/DC |
| Pousantaj maksimòm koule | 45 galon pou chak minit |
| Pwa atik | 65 liv |
| Dimansyon pwodwi | 17.25"L x 8.91"L x 17.25"H |
| Materyèl | Nerjaveèi asye |
Enfòmasyon sou Garanti
Zoeller Company products are warranted against defects in material and workmanship for a period specified by the manufacturer from the date of purchase. Specific warranty terms and conditions may vary. Please refer to the official Zoeller Company warranty statement provided with your product or visit the manufacturer's websit pou enfòmasyon detaye.
Note: Improper installation, unauthorized repairs, or misuse of the product may void the warranty.
Sipò pou Kliyan
For technical assistance, replacement parts, or warranty claims, please contact Zoeller Customer Support.
- Manifakti: Zoeller Company
- Websit: www.zoellerpumps.com
- Enfòmasyon pou kontakte: Refer to the official Zoeller websit la oswa anbalaj pwodwi a pou jwenn enfòmasyon kontak aktyèl yo.
