Entwodiksyon
This manual provides detailed instructions for the installation, operation, and maintenance of your Audio-Technica AT3600L Moving Magnet Turntable Cartridge. The AT3600L is designed for high-fidelity audio reproduction and is compatible with turntables utilizing a standard half-inch mount headshell. Please read this manual thoroughly before installation and use to ensure optimal performance and longevity of your cartridge.
Pwodwi souview
The Audio-Technica AT3600L is a moving magnet cartridge featuring a durable design and a conical bonded diamond stylus. It is engineered to deliver clear and resonant sound reproduction for your vinyl records.
Karakteristik kle:
- Kalite: Leman k ap deplase (MM)
- Montaj: Standard Half-inch mount (1/2" spacing)
- Dyaman: 0.6mm Conical Bonded Diamond tip
- Cantilever: Carbon fibre round tube for accurate sound reproduction
- Fòs Suivi: Recommended range of 2.5 - 3.5 grams
- Sòti Nivo: 4.2mV @ 5cm/sec. @ 1Khz
- Gamme frekans: 20 - 20Khz
- Enpedans chaj: 47K ohm
- Separasyon chanèl: 20dB @ 1Khz & 15dB @ 10Khz
- Dimansyon: Approximately 2cm (H) x 3cm (L) x 1.6cm (W)
- Pwa: 5.7g
Figi 1: Devan view of the Audio-Technica AT3600L cartridge, showing the stylus assembly.
Enstalasyon ak Enstalasyon
Proper installation is crucial for optimal sound quality and to prevent damage to your records or equipment. The AT3600L is designed for turntables with a removable headshell and a standard half-inch mount.
- Preparasyon:
- Ensure your turntable is powered off and unplugged from the mains.
- Carefully remove the existing cartridge or headshell from the tonearm.
- Place the new AT3600L cartridge on a clean, stable surface.
- Koneksyon fil elektrik:
The AT3600L has four pins at the rear for connection to the tonearm wires. These wires are typically color-coded:
- Red (R+): Right channel hot
- Green (R-): Right channel ground
- White (L+): Left channel hot
- Blue (L-): Left channel ground
Carefully connect the corresponding wires from your tonearm to the pins on the cartridge. Use tweezers if necessary to avoid bending the pins or damaging the wires. Ensure connections are firm but do not apply excessive force.
Figi 2: Dèyè view of the AT3600L cartridge, highlighting the four connection pins for tonearm wires.
- Mounting to Headshell:
Align the two mounting holes on the cartridge with the screw holes on your headshell. Secure the cartridge using the two screws provided with your headshell or turntable. Do not overtighten the screws; they should be snug enough to hold the cartridge firmly in place without stripping the threads.
Figure 3: The AT3600L cartridge with its protective stylus cover, ready for mounting onto a headshell.
- Fòs Aliyman ak Suivi:
After mounting, it is essential to properly align the cartridge and set the tracking force. Refer to your turntable's instruction manual for specific guidance on:
- Cartridge Alignment: Use an alignment protractor to ensure the stylus tracks correctly across the record groove.
- Fòs Suivi: Set the tracking force to the recommended range of 2.5 - 3.5 grams. A tracking force scale is recommended for accuracy. Incorrect tracking force can cause premature stylus wear or damage to records.
- Anti-monte paten: Adjust the anti-skate setting on your tonearm to match the tracking force.
Enstriksyon Operasyon
Once installed and properly adjusted, your Audio-Technica AT3600L cartridge is ready for use. Ensure your turntable is connected to a phono preamplifier oswa yon amplifier with a dedicated phono input (MM type).
- Plasman Rekò: Place your vinyl record carefully on the turntable platter.
- Stylus Guard Removal: Gently remove the clear plastic stylus guard from the cartridge. Always remove and replace the guard with care to avoid damaging the stylus.
- Tonearm Operation: Use the tonearm lift lever to raise the tonearm. Position the tonearm over the desired starting groove of the record.
- Desann Stylus la: Slowly lower the tonearm using the lift lever. The stylus will gently descend onto the record groove, and playback will begin. Avoid dropping the tonearm or stylus onto the record, as this can cause damage.
- Ending Playback: At the end of a record side, or when you wish to stop playback, use the tonearm lift lever to raise the tonearm. Return the tonearm to its rest and replace the stylus guard.
Enpòtan: Always replace the stylus guard when the turntable is not in use or when moving the turntable to protect the delicate stylus from accidental damage.
Antretyen
Regular maintenance ensures optimal performance and extends the life of your cartridge and records.
- Netwayaj Stylus:
Clean the stylus regularly to remove dust and debris. Use a soft stylus brush, brushing gently from the back of the stylus towards the front (in the direction of play). Never brush from front to back or side to side, as this can damage the cantilever.
- Netwayaj Dosye:
Ensure your records are clean before playing. Dust and dirt on records can transfer to the stylus, degrading sound quality and accelerating wear.
- Ranplasman Stylus:
The stylus is a consumable part and will wear out over time. A worn stylus can damage your records and degrade sound quality. Replace the stylus (Audio-Technica ATN3600L) after approximately 300-500 hours of playback, or sooner if you notice a significant drop in sound quality or increased record wear. The stylus is user-replaceable by gently pulling the old stylus assembly forward and down, and then pushing the new one up and back into place until it clicks.
Depanaj
If you experience issues with your AT3600L cartridge, consult the following common problems and solutions:
| Pwoblèm | Kòz posib | Solisyon |
|---|---|---|
| Pa gen son oswa son fèb soti nan yon kanal |
|
|
| Son defòme oswa toufe |
|
|
| Sote oswa sote |
|
|
| Chanson oswa bri buz |
|
|
Espesifikasyon
| Karakteristik | Detay |
|---|---|
| Katouch Kalite | Leman k ap deplase (MM) |
| Montaj | Half-inch mount |
| Kalite dyaman | 0.6mm Conical Bonded Diamond |
| Cantilever | Carbon fibre round tube |
| Tracking Force | 2.5 - 3.5 grams (recommended) |
| Nivo Sòti | 4.2mV @ 5cm/sec. @ 1Khz |
| Repons Frekans | 20 - 20,000 Hz |
| Enpedans chaj | 47K ohm |
| Balans chanèl | 1.5 dB |
| Separasyon chanèl | 20dB @ 1Khz & 15dB @ 10Khz |
| Dimansyon (H x L x W) | Apeprè 2cm x 3cm x 1.6cm |
| Pwa | 5.7g |
| Nimewo Modèl | AT3600L (also referred to as AT3600) |
Garanti ak sipò
Audio-Technica products are manufactured to high standards and are backed by a manufacturer's warranty against defects in materials and workmanship. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Audio-Technica websit.
For technical support, replacement parts (such as the ATN3600L stylus), or service inquiries, please contact your local Audio-Technica distributor or customer service center. Contact information can typically be found on the Audio-Technica websit la oubyen nan anbalaj pwodwi ou a.
Règleman retounen: This product is subject to a return policy, typically allowing for returns or replacements within 30 days of purchase, provided the item is in its original condition. Please consult your retailer's specific return policy for details.
