Manyèl Itilizatè Platin Vini Clearaudio Concept MM

1. Entwodiksyon

The Clearaudio Concept MM Turntable is an exceptional audio component designed to deliver high-fidelity sound reproduction from your vinyl records. Featuring an exclusive magnetic bearing system and a pre-mounted Classic MM cartridge, this turntable offers a refined and dynamic listening experience. Its robust construction, utilizing high-quality alloy and engineered wood, ensures stable and precise playback.

Karakteristik kle yo enkli:

• Pre-mounted Classic MM (Moving Magnet) cartridge for immediate use.
• Exclusive magnetic bearing for ultra-low friction and smooth platter rotation.
• Belt-drive motor for stable speed and reduced vibrations.
• Integrated tonearm (CF tonearm) designed for optimal tracking.

2. Ki sa ki nan bwat la

Lè w ap debale l, tanpri asire w tout konpozan yo la epi yo an bon eta:

• Clearaudio Concept MM Turntable unit
• Pre-mounted Classic MM cartridge/stylus
• Kouvèti pousyè
• Power supply unit (with cable)
• Kondwi senti
• Plat

Si nenpòt atik ki manke oswa ki domaje, tanpri kontakte konsesyonè ou imedyatman.

3. Gid Enstalasyon

Careful setup is crucial for optimal performance of your Clearaudio Concept MM Turntable.

3.1 Plasman

Choose a stable, level surface away from direct sunlight, heat sources, and strong vibrations. Ensure adequate ventilation around the unit.

3.2 Debalaj ak Asanble

1. Gently remove the turntable from its packaging.
2. Place the main plinth on your chosen surface.
3. Carefully place the platter onto the spindle. The magnetic bearing system will guide it into place.
4. Enstale senti transmisyon an otou pouli motè a ak rebò enteryè plato a.
5. Mete kouvèti pousyè tè a sou plato a.

3.3 Tonearm and Cartridge Adjustment

Your Clearaudio Concept MM Turntable comes with a pre-mounted Classic MM cartridge. While factory-set, fine-tuning may be required for optimal sound and stylus longevity.

• Fòs Suivi: The recommended tracking force for the Classic MM cartridge is typically around 2.0 grams. Due to the magnetic suspension, it is recommended to set the tracking force at the height of the platter for accurate readings. Use a digital stylus force gauge for precision.
• Anti-Patinaj: The anti-skating adjustment is located underneath the base of the platter. This adjustment counteracts the inward force on the tonearm, ensuring even wear on the stylus and proper channel balance. Adjust it carefully while playing a record or using a test record.
• VTA (Vertical Tracking Angle) / Azimuth: These are typically factory-set for the pre-mounted cartridge. Refer to advanced setup guides if further adjustment is desired.

Figi 3.1: Plis paseview of the Clearaudio Concept MM Turntable, showing the platter, tonearm, and speed selection knob.

3.4 Koneksyon

Connect the turntable to your audio system:

1. Connect the RCA audio cables from the turntable's output to the "Phono MM" input on your amplifier or AV receiver. If your amplifier does not have a dedicated "Phono MM" input, you will need an external phono preamplifier.
2. Konekte fil tè a ki soti nan platin lan ak tèminal tè a sou ou a. amplifier oswa phono preamplifikatè pou minimize ronfleman.

3.5 Koneksyon pouvwa

Connect the power supply unit to the turntable's power input, then plug it into a suitable wall outlet. Ensure the power switch is in the OFF position before connecting.

4. Operasyon Enstriksyon

4.1 Limen/Etenyen

Locate the power switch, typically integrated with the speed selection knob. Turn the knob to the desired speed (33, 45, or 78 RPM) to power on the turntable. Turn it to the 'Off' position to power off.

4.2 Seleksyon vitès

The Clearaudio Concept MM Turntable supports multiple playback speeds:

• 33 ⅕ RPM: For standard LPs (Long Play records).
• 45 RPM: For singles and some audiophile pressings.
• 78 RPM: For shellac records (requires a dedicated 78 RPM stylus, not included).

Select the appropriate speed using the control knob on the plinth.

4.3 Jwe yon Disk

1. Mete yon dosye sou plato a.
2. Select the correct playback speed.
3. Leve bra ton an avèk levye repèkaj la.
4. Carefully position the tonearm over the desired starting groove of the record.
5. Desann levye repè a dousman pou pèmèt stylet la desann sou disk la.
6. Ajiste volim sou ou amplifier.

4.4 Kijan pou kanpe lekti a

1. Leve bra ton an avèk levye repèkaj la.
2. Retounen bra ton an nan repo li.
3. Lower the cueing lever.
4. Turn the speed selection knob to the 'Off' position to power down the turntable.
5. Replace the dust cover to protect the turntable from dust.

5. Antretyen

Regular maintenance will ensure the longevity and optimal performance of your turntable.

• Kouvèti pousyè: Always use the dust cover when the turntable is not in use to prevent dust accumulation on the platter, tonearm, and stylus.
• Netwayaj Plint lan ak Plato a: Use a soft, dry, lint-free cloth to wipe down the plinth and platter. Avoid abrasive cleaners or solvents.
• Netwayaj Stylus: Netwaye stylus la regilyèman avèk yon bwòs stylus espesyal oswa yon likid netwayaj. Toujou bwose soti dèyè pou rive devan.
• Kondwi senti: Periodically inspect the drive belt for wear or stretching. Replace it if it appears loose or cracked, as this can affect speed stability.
• Ranplasman katouch: The stylus (needle) of your cartridge will wear over time. Consult a professional or refer to the cartridge manufacturer's guidelines for replacement intervals.

NAN. Depanaj

Men kèk pwoblèm komen ak solisyon potansyèl yo:

If the problem persists, please contact your authorized Clearaudio dealer or support.

7. Espesifikasyon

8. Garanti ak sipò

For warranty information, please refer to the documentation provided with your purchase or contact your authorized Clearaudio dealer. Clearaudio products are known for their quality and durability, and support is available through their official channels.

For technical assistance or service inquiries, please contact your local Clearaudio distributor or visit the official Clearaudio websit pou detay kontak.