1. Entwodiksyon
This manual provides essential information for the proper installation, operation, and maintenance of your Datalogic QuickScan Lite QW2100 Bar Code Reader. The QW2100 is an entry-level linear imager designed for reading long, truncated 1D bar codes, commonly found in retail, light industrial, document processing, and office environments. Its ergonomic design ensures user comfort during daily operations.
Please read this manual thoroughly before using the device to ensure safe and efficient operation.
2. Enfòmasyon sou Sekirite
Obsève prekosyon sekirite sa yo pou evite blesi ak domaj nan aparèy la:
- Pa ekspoze aparèy la nan tanperati ekstrèm, imidite, oswa limyè solèy la dirèk.
- Avoid dropping the device or subjecting it to severe impacts.
- Pa eseye ouvri oswa modifye aparèy la. Konfye tout antretyen bay pèsonèl kalifye.
- Keep the scanning window clean to ensure optimal performance.
- Use only Datalogic-approved accessories and power supplies.
3. Pake kontni
Verifye ke tout atik yo prezan nan pakè a:
- Datalogic QuickScan Lite QW2100 Bar Code Reader
- USB Cable (if USB interface model) or RS-232/Keyboard Wedge Cable
- Quick Start Guide (refer to this manual for full instructions)
- Optional: Stand (if purchased as a kit)
4. Pwodwi souview
The Datalogic QuickScan Lite QW2100 features a compact and ergonomic design for comfortable handheld use. Key components include:
- Fenèt Eskane: Emits the scan line and reads bar codes.
- Bouton deklanche: Aktive pwosesis eskanè a.
- Endikatè ki ap dirije: Provides feedback on scanning status (e.g., successful read, error).
- Cable Connector Port: For connecting the interface cable.
5. Enstalasyon
Follow these steps to set up your QW2100 Bar Code Reader:
- Konekte kab la: Insert the appropriate interface cable (USB or RS-232/Keyboard Wedge) into the connector port at the base of the scanner. Ensure a secure connection.
- Konekte ak aparèy lame a:
- Entèfas USB: Plug the USB connector into an available USB port on your computer or POS system. The operating system should automatically detect and install the necessary drivers.
- RS-232/Keyboard Wedge Interface: Connect the cable to the corresponding port on your host device. Configuration may be required using Datalogic Aladdin software or by scanning configuration bar codes (refer to the full programming manual for details).
- Pouvwa sou: The scanner typically powers on automatically once connected to the host device. The indicator LED may illuminate to confirm power.
- Optional Stand Setup: If using the optional stand, assemble it according to its instructions and place the scanner in the stand for hands-free operation.
For advanced configuration, such as changing symbologies or interface settings, refer to the Datalogic Aladdin Configuration Software or the comprehensive programming manual.
6. Operasyon Enstriksyon
To scan a bar code with your QW2100 reader:
- Objektif: Point the scanning window of the reader at the bar code you wish to scan.
- Aktive: Press and hold the trigger button. A bright scan line will project from the scanning window.
- Eskane: Position the scan line across the entire bar code. The QW2100 is designed for wide-angle scanning, making it effective for long or wide codes.
- Konfimasyon: Upon a successful read, the scanner will emit an audible beep (if enabled) and the indicator LED will flash. Release the trigger button.
For optimal performance, ensure the bar code is clean and not excessively creased or damaged. Adjust the distance between the scanner and the bar code for the best read.
7. Antretyen
Proper maintenance ensures the longevity and performance of your bar code reader:
- Netwaye Fenèt Eskanè a: Sèvi ak yon twal mou, ki san pèl dampened with a mild, non-abrasive cleaner (e.g., glass cleaner) to gently wipe the scanning window. Avoid harsh chemicals or abrasive materials that could scratch the surface.
- Netwayaj C aasing: Siye deyò c laasing ak yon mou, damp twal.
- Enspeksyon kab: Regularly check the interface cable for any signs of damage, fraying, or loose connections. Replace damaged cables immediately.
- Depo: Lè w pa ap itilize eskanè a, sere l nan yon anviwònman pwòp epi sèk, lwen limyè solèy dirèk ak tanperati ekstrèm.
NAN. Depanaj
| Pwoblèm | Kòz posib | Solisyon |
|---|---|---|
| Eskanè a pa limen. | Cable not connected properly or host device not providing power. | Ensure the cable is securely connected to both the scanner and the host device. Try a different USB port or host device. |
| Scanner does not read bar codes. |
|
|
| Scanner reads intermittently. | Damaged cable or loose connection. | Check the cable for damage and ensure connections are secure. Replace cable if necessary. |
9. Espesifikasyon
| Karakteristik | Detay |
|---|---|
| Nimewo Modèl | QW2120-BK |
| Mak | Datalogic |
| Koneksyon Teknoloji | USB Cable (also available in RS-232/Keyboard Wedge) |
| Sous pouvwa | AC (via host device USB or external power supply for RS-232) |
| Pousantaj eskane | 400 eskanè / segonn |
| Dimansyon pwodwi (L x W x H) | 6.69 x 2.56 x 2.76 pous (17 x 6.5 x 7 cm) |
| Pwa atik | 4.2 ons |
| Koulè | Nwa |
| Sipòte senbòl yo | Most standard 1D bar codes (e.g., EAN/UPC, Code 39, Code 128, Interleaved 2 of 5, etc.) |
10. Garanti ak sipò
Datalogic products are designed and manufactured to the highest quality standards. For warranty information, please refer to the warranty card included with your product or visit the official Datalogic websit.
For technical support, product registration, or to download the latest drivers and software (such as Datalogic Aladdin Configuration Software), please visit the Datalogic support portal or contact your local Datalogic representative.
Websit: www.datalogic.com
