True 988284 Temperature Control Kit 077B6856 Instruction Manual

1. Pwodwi souview

The True 988284 Temperature Control Kit 077B6856 is a genuine Original Equipment Manufacturer (OEM) replacement part designed for True Refrigeration units. This kit ensures the proper regulation of temperature within your commercial refrigeration equipment, maintaining optimal operating conditions for safety, reliability, and performance.

Imaj 1.1: Plis paseview of the True 988284 Temperature Control Kit, showing the control unit, dial, and capillary tube.

Karakteristik kle:

• Genuine OEM replacement part for True Refrigeration.
• Designed for safety, reliability, and performance.
• Ensures accurate temperature regulation.
• Approved by the original equipment manufacturer.

2. Enfòmasyon sou Sekirite

Enpòtan: Read all instructions carefully before installation or operation. Failure to follow these instructions may result in property damage, personal injury, or death.

• Danje elektrik: Always disconnect power to the refrigeration unit before attempting any installation, maintenance, or repair.
• Pèsonèl ki kalifye: Installation and servicing should only be performed by qualified and authorized service personnel.
• Pyès orijinal: Use only genuine OEM parts for replacements to ensure compatibility, safety, and optimal performance.
• Itilizasyon entansyonèl: This temperature control kit is intended solely for its specified designed usage within True Refrigeration equipment. Do not use for any other purpose.
• Capillary Tube: Handle the capillary tube with care. Do not bend sharply or kink, as this can damage the sensor and affect performance.

3. Pake kontni

Verifye ke tout konpozan yo prezan epi yo pa domaje lè w ap ouvri pake a.

Image 3.1: Contents of the True 988284 Temperature Control Kit, typically including the control module, temperature dial, mounting screws, and electrical connectors.

• Temperature Control Module with Capillary Tube
• Temperature Adjustment Dial
• Mounting Screws (typically 2)
• Electrical Connectors (typically 2)
• Instruction Sheet (if included by manufacturer)

4. Enstriksyon Enstalasyon

This section provides general guidance for replacing a temperature control kit. Specific installation steps may vary depending on your True Refrigeration model. Refer to your unit's service manual for detailed, model-specific instructions.

1. Dekonekte pouvwa: Locate the main power supply to the refrigeration unit and disconnect it. Verify that power is off using a voltage tèsteur.
2. Access Control Area: Depending on your unit, you may need to remove access panels or grilles to reach the existing temperature control.
3. Kablaj Dokiman: Before disconnecting any wires, take clear photos or make a diagram of the existing wiring connections to the old temperature control. Note the position of the capillary tube sensor.
4. Retire ansyen kontwòl la:
   • Carefully disconnect the electrical wires from the old control.
   • Unmount the old control from its housing.
   • Gently remove the capillary tube sensor from its sensing location (e.g., evaporator coil, air return).
5. Enstale nouvo kontwòl la:
   • Insert the new capillary tube sensor into the exact same sensing location as the old one. Ensure it is securely positioned for accurate temperature readings. Avoid kinking or damaging the tube.
   • Mount the new temperature control module in the same position as the old one using the provided screws.
   • Connect the electrical wires to the new control according to your documented wiring diagram. Ensure connections are secure.
6. Remonte: Replace any access panels or grilles that were removed.
7. Retabli pouvwa: Reconnect the main power supply to the refrigeration unit.
8. Operasyon tès: Allow the unit to run for a period and monitor the temperature to ensure proper operation and temperature regulation. Adjust the dial as needed.

Nòt: If you are unsure about any step, consult a qualified refrigeration technician.

5. Operasyon Enstriksyon

The temperature control kit features a rotary dial for adjusting the desired temperature within your True Refrigeration unit.

• Ajisteman Tanperati: Rotate the dial to select the desired temperature setting. Typically, rotating towards "Colder" or higher numbers (e.g., 6, 7, 8) will decrease the temperature, while rotating towards "Warmer" or lower numbers (e.g., 1, 2, 3) will increase it.
• Siveyans: After adjusting the setting, allow several hours for the refrigeration unit to stabilize at the new temperature. Use an independent thermometer to verify the internal temperature.
• Optimal Setting: The optimal setting will depend on the specific refrigeration unit and the products being stored. Adjust incrementally until the desired temperature range is consistently maintained.

6. Antretyen

The True 988284 Temperature Control Kit is designed for durability and reliability. Regular maintenance of the overall refrigeration unit is crucial for its longevity and efficient operation.

• Enspeksyon peryodik: Periodically inspect the control module and its wiring for any signs of wear, corrosion, or loose connections.
• Capillary Tube: Ensure the capillary tube remains securely in its sensing location and is not damaged or kinked.
• Netwayaj: Keep the area around the temperature control free from dust and debris. Use a soft, dry cloth for cleaning. Do not use harsh chemicals or abrasive cleaners.
• Tcheke pwofesyonèl: Consider annual professional maintenance checks for your refrigeration unit, which should include inspection of the temperature control system.

NAN. Depanaj

If your refrigeration unit is experiencing temperature issues after installing this kit, consider the following common troubleshooting steps:

Avètisman: Do not attempt repairs beyond your technical capabilities. Always prioritize safety and consult a professional for complex issues.

8. Espesifikasyon

9. Garanti ak sipò

As a genuine OEM part, this True 988284 Temperature Control Kit is manufactured to high standards. For specific warranty information, please refer to the documentation provided with your original True Refrigeration unit or contact True Refrigeration directly.

Sipò Kliyan:

For technical assistance, troubleshooting beyond this manual, or to inquire about warranty claims, please contact True Refrigeration customer support or an authorized service provider.

• Manifakti: Se vre
• Websit: www.truemfg.com
• Nimewo Modèl: VRE988284
• Nimewo Pati: 988284, 077B6856