Entwodiksyon
This manual provides essential instructions for the setup, operation, and maintenance of your Datalogic Heron HD3130-BK 1D Barcode Scanner. Please read this manual thoroughly before using the device to ensure proper functionality and longevity.
Kontni pake
- Datalogic Heron HD3130-BK 1D Barcode Scanner
- Kanpe eskanè
- (USB) Connection Cable (sold separately or included depending on package)
- Dokimantasyon (manyèl sa a)
Note: The connection cable is required for operation and may be sold separately.
Enstalasyon
Follow these steps to set up your Datalogic Heron HD3130-BK barcode scanner:
- Depake eskanè a: Carefully remove the scanner and its stand from the packaging.
- Rasanble kanpe la: If the stand is not pre-assembled, attach the scanner to the stand base according to the visual guide below. Ensure it is securely fastened.
- Konekte kab la: Insert one end of the USB connection cable into the port at the base of the scanner. Connect the other end of the USB cable to an available USB port on your computer (desktop or laptop).
- Pouvwa sou: The scanner is powered via the USB connection. Once connected, it should power on automatically.
- Enstalasyon chofè (si sa nesesè): In most cases, the scanner will be recognized as a standard HID keyboard device and will not require specific driver installation. If prompted, follow your operating system's instructions for new hardware detection.
This image displays the Datalogic Heron HD3130-BK 1D Barcode Scanner in black, positioned on its included stand. The scanner features a sleek, ergonomic design, suitable for both handheld and presentation scanning.
Enstriksyon Operasyon
The Datalogic Heron HD3130-BK is designed for efficient 1D barcode scanning. It supports both handheld and presentation modes.
Okenn pòtatif
- Pick Up the Scanner: Remove the scanner from its stand.
- Vize epi eskane: Point the scanner's window at the 1D barcode you wish to read. Ensure the red aiming line covers the entire barcode.
- Konfime eskanè a: A successful scan is typically indicated by an audible beep and/or a visual confirmation (e.g., a green light). The scanned data will be transmitted to your connected computer as keyboard input.
Presentation Scanning (using the stand)
- Mete Atik: Position the barcode of the item in front of the scanner's window while it is in its stand.
- Deteksyon otomatik: The scanner will automatically detect and read the barcode when it is presented correctly within its field of view.
- Konfime eskanè a: A successful scan is indicated by an audible beep and/or visual confirmation.
The scanner is capable of processing approximately 270 scans per second, ensuring quick and efficient data capture.
Antretyen
Bon antretyen asire lonjevite ak pèfòmans optimal eskanè ou a.
- Netwayaj: Sèvi ak yon ti moso twal mou, ki san pèl dampened with water or a mild, non-abrasive cleaner to wipe the scanner's exterior and scan window. Do not use harsh chemicals or abrasive materials.
- Depo: When not in use, store the scanner in a clean, dry environment, away from direct sunlight and extreme temperatures.
- Swen kab: Avoid bending or twisting the USB cable excessively. Ensure it is not pinched or placed under heavy objects.
Depanaj
If you encounter issues with your Datalogic Heron HD3130-BK scanner, refer to the following common problems and solutions:
| Pwoblèm | Kòz posib | Solisyon |
|---|---|---|
| Eskanè a pa limen. | Kab USB a pa konekte oswa li gen pwoblèm. | Ensure the USB cable is securely connected to both the scanner and the computer. Try a different USB port or cable. |
| Eskanè a pa li kòd bar yo. | Barcode damaged, incorrect aiming, or scanner settings. | Ensure the barcode is clean and undamaged. Aim the red line directly across the barcode. Check if the scanner is configured for the specific barcode symbology (e.g., UPC-A, Code 39). |
| Done eskane yo parèt mal. | Keyboard layout mismatch or scanner configuration. | Verify your computer's keyboard layout matches the scanner's configured output. Refer to the full product manual for advanced configuration options. |
| Eskanè a bip men pa gen done ki transmèt. | Aplikasyon an pa an fokus oubyen mòd koòdone a pa kòrèk. | Ensure the cursor is in the desired input field of your application. Confirm the scanner is operating in HID keyboard emulation mode. |
For more detailed troubleshooting or advanced configuration, please refer to the comprehensive Datalogic Heron HD3130 product manual available on the official Datalogic websit.
Espesifikasyon
| Karakteristik | Detay |
|---|---|
| Nimewo Modèl | HD3130-BK |
| Kalite eskanè | 1D Barcode Scanner |
| Pousantaj eskane | 270 eskanè / segonn |
| Koneksyon Teknoloji | USB kab |
| Sous pouvwa | Elektrik ak fil (via USB) |
| Aparèy konpatib | Desktop, Laptop |
| Pwa atik | 1.28 liv (apeprè 0.58 kg) |
| Dimansyon pwodwi | 7.5 x 8.8 x 4.1 pous (apeprè 19.05 x 22.35 x 10.41 cm) |
| Manifakti | Datalogic |
| Nimewo Idantifikasyon Komès Mondyal (GTIN) | 05054629213858 |
Garanti ak sipò
Datalogic products are designed for reliability and performance. For information regarding product warranty, please refer to the warranty statement included with your purchase or visit the official Datalogic websit.
For technical support, service, or to inquire about additional accessories, please contact Datalogic customer support through their official channels. You may need your product model number (HD3130-BK) and serial number (if applicable) when contacting support.
Resous sou entènèt: For the most up-to-date documentation, drivers, and software, please visit the Datalogic Official Websit.
