1. Entwodiksyon
Thank you for choosing the Deca Parva 145E Welding Machine. This manual provides essential information for the safe and efficient operation, setup, maintenance, and troubleshooting of your new welding equipment. Please read this manual thoroughly before using the machine and keep it for future reference.
The Deca Parva 145E is designed for various welding tasks, offering reliable performance for both hobbyists and professionals. Proper understanding and adherence to these instructions will ensure optimal results and prolong the life of your machine.
2. Enstriksyon Sekirite
AVÈTISMAN: Soude kapab danjere. Toujou swiv prekosyon sekirite yo pou evite blesi grav oswa lanmò.
- Chòk elektrik: Welding current can cause fatal electric shock. Ensure proper grounding. Do not touch live electrical parts. Wear dry, insulated gloves.
- Lafimen ak gaz: Welding fumes and gases can be hazardous to your health. Work in a well-ventilated area. Use a fume extractor if necessary.
- Reyon arc: Arc rays can burn eyes and skin. Wear a welding helmet with appropriate shade filter and protective clothing.
- Dife ak eksplozyon: Welding sparks and hot metal can cause fire or explosions. Keep flammable materials away from the welding area. Have a fire extinguisher readily available.
- Burns: Metal cho ak salop ka lakòz boule grav. Mete gan ak rad pwoteksyon.
- Pace Makers: Persons with pacemakers should consult their doctor before operating this equipment.
- Toujou dekonekte kouran an anvan ou fè nenpòt antretyen oswa sèvis.
3. Pake kontni
Carefully unpack the box and ensure all items are present and undamaged. If any items are missing or damaged, contact your retailer immediately.
- Deca Parva 145E Welding Machine
- Detantè Elektwòd ak Kab
- Tè Clamp ak kab
- Welding Mask (Handheld)
- Chipping Hammer / Wire Brush
- Manyèl Enstriksyon
4. Pwodwi souview
The Deca Parva 145E is a compact and robust welding machine designed for various arc welding applications. Below is an image illustrating the main unit and its included accessories.
Figi 1: Deca Parva 145E Welding Machine and included accessories. The image displays the yellow main welding unit, a black handheld welding mask, a black chipping hammer with a wire brush, an electrode holder, and a ground clamp.
Konpozan kle:
- Inite Prensipal: Jòn casing with control panel.
- Pouvwa switch: On/Off kontwòl.
- Bouton Ajisteman Kouran: For stepless welding current regulation.
- Thermal Protection Indicator: Illuminates when the machine overheats.
- Tèminal Sòti: Connections for electrode holder and ground clamp.
- Detantè elektwòd: Secures the welding electrode.
- Tè Clamp: Connects to the workpiece to complete the electrical circuit.
- Welding Mask: Provides eye and face protection from arc rays and sparks.
- Chipping Hammer/Wire Brush: Used for removing slag and cleaning welds.
5. Enstalasyon
- Plasman: Place the welding machine on a stable, level surface in a well-ventilated area, away from flammable materials. Ensure adequate space around the machine for air circulation.
- Koneksyon pouvwa: Connect the machine's power cord to a suitable grounded electrical outlet. Ensure the power supply matches the machine's requirements (refer to specifications).
- Konekte tè Clamp: Tache tè a clamp cable to the appropriate output terminal on the welding machine. Securely attach the ground clamp sou pyès la oswa tab soude a, pou asire bon kontak elektrik.
- Konekte Detantè Elektwòd la: Attach the electrode holder cable to the other output terminal on the welding machine. Insert a suitable electrode into the electrode holder. The recommended electrode size for this machine is 1.6mm to 3.2mm.
- Ekipman Pwoteksyon Pèsonèl (PPE): Before turning on the machine, ensure you are wearing all necessary PPE, including a welding helmet, welding gloves, and protective clothing.
6. Operasyon Enstriksyon
- Limen: Switch the main power switch to the "ON" position.
- Mete Kouran Soudaj la: Adjust the current adjustment knob to the desired welding current. The appropriate current setting depends on the electrode diameter and the material thickness being welded. Start with a lower setting and increase as needed.
- Prepare pyès travay la: Asire w ke pyès la pwòp epi san rouye, penti, oswa grès pou asire yon bon soudi.
- Frape yon ak: While wearing your welding helmet, gently tap or scratch the electrode against the workpiece to strike an arc. Once the arc is established, maintain a consistent arc length and travel speed.
- Soude: Move the electrode along the joint, maintaining a steady hand and angle. Observe the weld pool and adjust your technique as necessary.
- Pwoteksyon tèmik: If the thermal protection indicator illuminates, the machine has overheated. Turn off the machine and allow it to cool down before resuming operation. Do not bypass this safety feature.
- Finish Welding: When finished, lift the electrode from the workpiece to break the arc. Turn off the welding machine.
- Post-Weld Cleaning: Use the chipping hammer to remove slag from the weld bead, then use the wire brush to clean the weld.
7. Antretyen
Antretyen regilye asire lonjevite ak fonksyònman an sekirite nan machin soude ou a.
- Netwayaj: Netwaye deyò machin nan detanzantan avèk yon twal sèk. Sèvi ak lè konprese pou retire pousyè ak debri ki nan ouvèti vantilasyon yo. Asire w ke machin nan debranche anvan ou netwaye li.
- Enspeksyon kab: Regularly inspect all cables (power, electrode, ground) for cuts, fraying, or damage. Replace damaged cables immediately.
- Koneksyon tèminal: Ensure all terminal connections are tight and free of corrosion.
- Depo: Store the welding machine in a dry, clean environment, away from moisture and extreme temperatures.
- Detantè Elektwòd ak Koneksyon Tèamp: Keep these accessories clean and in good working condition. Replace if damaged.
NAN. Depanaj
| Pwoblèm | Kòz posib | Solisyon |
|---|---|---|
| Pa gen pouvwa nan machin nan. | Power cord unplugged, faulty outlet, tripped circuit breaker. | Check power connection, test outlet, reset circuit breaker. |
| Machine turns on but no arc. | Poor ground connection, incorrect current setting, faulty electrode holder/cable, wet electrode. | Asire w ke tè a byen fèmenamp is securely attached to clean metal. Adjust current. Inspect cables and holder. Use dry electrodes. |
| Thermal protection light is on. | Machine overheated due to prolonged use or insufficient ventilation. | Turn off the machine and allow it to cool down. Ensure proper ventilation. Reduce duty cycle. |
| Poor weld quality (e.g., porosity, lack of penetration). | Incorrect current, improper arc length, wrong electrode, dirty workpiece, incorrect travel speed. | Adjust current, maintain proper arc length, use correct electrode for material, clean workpiece, adjust travel speed. |
If you encounter problems not listed here or if the suggested solutions do not resolve the issue, please contact customer support.
9. Espesifikasyon
| Karakteristik | Detay |
|---|---|
| Mak | Deka |
| Non modèl | Parva 145E |
| Nimewo Pati | 0400193 |
| Nimewo Modèl Atik | 322006 |
| Kouran soude | Ajisteman Stepless |
| Electrode Diameter Range | 1.6 milimèt - 3.2 milimèt |
| Kalite sous pouvwa | Elektrik (AC) |
| Dimansyon pwodwi | 390 x 210 x 280 mm (from description) / 24.99 x 16.99 x 29.49 cm (from specifications) |
| Pwa atik | 14.5 kg (from description) / 14.3 kg (from specifications) |
| Manifakti | DECA |
| Dat Premye Disponib | 17 septanm 2015 |
Nòt: Espesifikasyon yo ka chanje san avètisman pou amelyore pwodwi a.
10. Garanti ak sipò
For warranty information, please refer to the documentation provided at the time of purchase or contact your retailer. Deca products are manufactured to high-quality standards, and support is available for any operational issues or technical inquiries.
If you require technical assistance or have questions regarding your Deca Parva 145E Welding Machine, please contact the authorized Deca service center or your point of purchase. When contacting support, please have your model number (0400193 / 322006) and purchase date available.
