Leitz 5530 Manual Stapler User Guide

Entwodiksyon

This manual provides comprehensive instructions for the safe and efficient use of your Leitz 5530 manual stapler. Please read this guide thoroughly before operating the device to ensure proper function and longevity.

Enstriksyon Sekirite

• Kenbe dwèt ou lwen mekanis agrafaj la pandan w ap travay pou evite blesi.
• Use only staples of the correct size and type recommended for the Leitz 5530 stapler.
• Do not attempt to staple materials thicker than the stapler's maximum capacity.
• Keep the stapler out of reach of children.
• Evite lage agrafeuz la, paske sa ka domaje konpozan entèn li yo.

Kontni pake

• 1 x Leitz 5530 Manual Stapler (Black)

Pwodwi souview

Familiarize yourself with the components of your Leitz 5530 stapler.

Figi 1: Angle view of the Leitz 5530 manual stapler, showcasing konsepsyon kontra enfòmèl ant li ak fini nwa li.

Figi 2: Side view of the Leitz 5530 manual stapler, illustrating its ergonomic shape and staple exit point.

Figi 3: Top view of the Leitz 5530 manual stapler, highlighting the "PUSH" button for staple loading and the "OPEN" latch for the staple channel.

Setup: Loading Staples

1. Locate the "PUSH" button on the top rear of the stapler (refer to Figure 3).
2. Press the "PUSH" button firmly to release the staple channel. The top cover will spring open.
3. Pull the staple channel completely out until it locks into place.
4. Insert a strip of Leitz 24/6 or 26/6 staples into the channel with the staple points facing downwards.
5. Push the staple channel back into the stapler until it clicks securely into place.
6. Close the top cover until it latches.

Agrafeur ou a kounye a pare pou itilize.

Enstriksyon Operasyon

1. Rasanble papye ou vle agrafe yo, asire w ke yo byen aliyen.
2. Insert the papers into the stapler's throat, positioning them where you want the staple to be placed.
3. Press down firmly and evenly on the top of the stapler until the staple penetrates the paper and clinches underneath.
4. Release the stapler. The stapled papers can now be removed.

Do not force the stapler if it encounters resistance, as this may cause jams or damage.

Antretyen

Netwaye konfiti Staple

1. If a staple jam occurs, first remove any paper from the stapler.
2. Open the staple channel as described in the "Loading Staples" section.
3. Carefully remove any bent or jammed staples from the channel using tweezers or a small, flat tool. Be cautious to avoid injury.
4. Ensure the staple channel is clear before reloading new staples and closing the stapler.

Netwayaj

Wipe the exterior of the stapler with a soft, dry cloth to remove dust and debris. Do not use abrasive cleaners or solvents.

Depanaj

Espesifikasyon

Garanti ak sipò

For warranty information and customer support, please refer to the documentation provided with your purchase or visit the official Leitz websit la. Kenbe prèv acha ou pou reklamasyon garanti.

For further assistance, please contact Leitz customer service.