Progress Lighting P3408-0930K9 Fitter 1 Light LED Flush Mount with AC Module Instruction Manual

Entwodiksyon

This manual provides detailed instructions for the safe installation, operation, and maintenance of your Progress Lighting P3408-0930K9 Fitter 1 Light LED Flush Mount with AC Module. Please read all instructions carefully before beginning installation and retain this manual for future reference.

Image: Progress Lighting P3408-0930K9 Fitter 1 Light LED Flush Mount in Brushed Nickel finish.

Enfòmasyon sou Sekirite

AVÈTISMAN: Risk of electric shock. Disconnect power at the circuit breaker or fuse box before installation or servicing. Do not attempt installation if you are not familiar with electrical wiring. Consult a qualified electrician.

• Li tout enstriksyon yo ak anpil atansyon anvan enstalasyon yo.
• Ensure the electrical supply is disconnected before handling the fixture.
• Tout koneksyon fil elektrik yo dwe fèt an akò ak kòd elektrik lokal ak nasyonal yo.
• Pa depase vol espesifye atage (120 Volts).
• Aparèy sa a fèt pou itilize andedan kay la sèlman.

Kontni pake

Verifye ke tout konpozan yo prezan anvan ou kòmanse enstalasyon an:

• LED Flush Mount Fixture (with integrated AC Module)
• Glass lonbraj
• Mounting Hardware Kit (screws, wire nuts, mounting strap)
• Manyèl Enstriksyon

Zouti obligatwa (pa enkli)

• Phillips tèt tournevis
• Flathead tournevis
• Fil retire rad sou ou
• Pens
• Tep elektrik
• Linèt sekirite

Enstalasyon ak Enstalasyon

Follow these steps to properly install your LED flush mount fixture:

1. Etenn pouvwa: Jwenn disjonktè a oswa bwat fizib la epi koupe kouran bwat koneksyon kote aparèy la pral enstale a. Verifye si kouran an koupe lè l sèvi avèk yon vòltaj.tage tèsteur.
2. Prepare Montaj la: Tache braslè montaj la nan bwat koneksyon an avèk vis yo bay yo. Asire w braslè a byen tache.
3. Koneksyon fil elektrik:
   • Konekte a nwa fil soti nan aparèy la rive nan la nwa fil (cho) ki soti nan bwat koneksyon an lè l sèvi avèk yon boulon fil.
   • Konekte a blan fil soti nan aparèy la rive nan la blan fil (net) ki nan bwat koneksyon an lè l sèvi avèk yon boulon fil.
   • Konekte a tè fil soti nan aparèy la rive nan la tè wire from the junction box (or to the green ground screw on the mounting strap) using a wire nut.
   • Ak anpil atansyon mete tout fil nan bwat junction la.
4. Tache aparèy: Align the fixture base with the mounting strap and secure it with the provided mounting screws. Ensure the fixture is flush against the ceiling.
5. Enstale Glass Shade: Carefully attach the glass shade to the fixture according to the specific design. Typically, this involves twisting or securing with decorative nuts.
6. Retabli pouvwa: Remete kouran an nan disjonktè a oswa nan bwat fizib la.

Image: Product dimensions for installation planning. The fixture measures approximately 9.25 inches in diameter and 4.63 inches in height.

Imaj: Egzamples of flush mount light fixture placement in various rooms, including hallways, living areas, bedrooms, and utility spaces.

Enstriksyon Operasyon

Once installed, operate your LED flush mount fixture as follows:

• Limen/Etenyen: Use a standard wall switch connected to the fixture's electrical circuit to turn the light on or off.
• Dimming: This fixture is dimmable when used with a compatible wall dimmer switch. Ensure your dimmer switch is rated for LED lighting to prevent flickering or damage.

Image: Visual representation indicating the fixture is dimmable when connected to a compatible wall dimmer.

Antretyen

The Progress Lighting P3408-0930K9 features an integrated LED AC module, meaning there are no bulbs to replace. Maintenance is minimal:

• Netwayaj: To clean the fixture, ensure power is off. Wipe the metal parts with a soft, dry cloth. Clean the glass shade with a mild glass cleaner and a soft cloth. Avoid abrasive cleaners or solvents.
• Enspeksyon: Enspekte aparèy la detanzantan pou wè si li gen nenpòt siy domaj oswa koneksyon ki lach. Si ou jwenn nenpòt pwoblèm, dekonekte kouran an epi konsilte yon elektrisyen kalifye.

Depanaj

If you encounter issues with your fixture, refer to the following common problems and solutions:

Espesifikasyon

Detailed specifications for the Progress Lighting P3408-0930K9 Fitter 1 Light LED Flush Mount:

• Nimewo Modèl: P3408-0930K9
• Mak: Pwogrè ekleraj
• Koulè: Bwose Nikèl
• Materyèl: Asye alyaj, Vè
• Style: Haitian
• Fòm aparèy limyè: Fèmen nan plafon an
• Dimansyon pwodwi: 9.25"L x 9.25"L x 4.63"H
• Itilizasyon anndan/deyò: Andedan kay la
• Sous pouvwa: Fil elektrik
• Kalite enstalasyon: Flush Mount
• Kalite sous limyè: Integrated LED (AC Module)
• Kantite sous limyè: 1
• Voltage: 120 Volts
• Koulè limyè: Blan cho (3000K)
• Klate: 1211 Lumen
• Wattage: 17 Watts
• Endèks rann koulè (CRI): 90
• Dimmable: Yes, with compatible wall dimmer
• Asanble obligatwa: Wi
• Peyi orijin: Lachin
• UPC: 785247189168

Image: Key LED specifications including 90 CRI for accurate color rendering and 3000K for a warm white light output.

Enfòmasyon sou Garanti

This Progress Lighting P3408-0930K9 Fitter 1 Light LED Flush Mount is covered by a 5-ane garanti from the date of purchase. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims. For specific terms and conditions, refer to the warranty documentation included with your product or contact Progress Lighting customer support.

Sipò pou Kliyan

If you have any questions regarding the installation, operation, or maintenance of your Progress Lighting fixture, please contact Progress Lighting customer support. You can find contact information on the official Progress Lighting websit entènèt la oubyen atravè revandè w la.

Resous sou entènèt: Pou plis enfòmasyon ak sipò, vizite Magazen Pwogrè Ekleraj sou Amazon.