Entwodiksyon
This manual provides essential information for the SPS 12V 9Ah UPS Replacement Battery, designed for use with Liebert PSP500-115 UPS systems. These batteries are high-quality replacements manufactured by ISO certified companies, engineered to meet or exceed original OEM specifications. This product consists of four 12V 9Ah Sealed Lead-Acid (SLA) batteries.
Imaj: Four SPS 12V 9Ah Sealed Lead-Acid Replacement Batteries. Each battery is black with a white label on the front, displaying the SPS brand logo, 'USA', model number 'SG1290T2', and important warnings regarding its non-spillable sealed lead-acid properties, constant voltage charge requirements, and cautions against shorting terminals or exposure to fire/heat. The batteries are arranged in a staggered formation, highlighting their compact size and design.
Key features of these replacement batteries include:
- Four SLA 12V 9Ah Replacement Battery (SPS Brand) for Liebert PSP500-115 UPS.
- Utilizes Absorbent Glass Mat (AGM) technology for superior performance.
- Chaje voltages are clearly marked on the battery for both cyclic and float applications.
- For orders of multiple batteries, voltage matching is performed to ensure optimal performance and extend battery and equipment life.
Enstalasyon ak Enstalasyon
These batteries are replacement units. It is crucial to reuse your existing cables, connectors, and other hardware from your original Liebert PSP500-115 UPS unit. The shipment contains only the replacement batteries.
- Preparasyon: Before beginning installation, ensure the UPS system is powered off and disconnected from all power sources. Refer to the original Liebert PSP500-115 UPS operations manual for specific safety precautions and battery compartment access instructions.
- Removal of Old Batteries: Carefully disconnect the existing battery cables and remove the old batteries from the UPS unit. Note the polarity (+ and -) of the connections before removal.
- Installation of New Batteries: Insert the new SPS 12V 9Ah replacement batteries into the UPS battery compartment. Connect the existing cables and connectors to the new batteries, ensuring correct polarity. Incorrect polarity can damage the batteries and the UPS.
- Sekirize: Secure the batteries and close the battery compartment according to the UPS manufacturer's instructions.
- Inisyal chaj: After installation, connect the UPS to a power source and allow it to charge the new batteries fully before putting the UPS into active service.
Nòt: Some equipment may use more than one battery. If you ordered multiple batteries, they have been voltage-matched to ensure optimal performance and extended life for both the batteries and your equipment.
Gid pou opere
The SPS 12V 9Ah replacement batteries utilize Absorbent Glass Mat (AGM) technology, which provides superior performance and reliability. For optimal battery life and performance, adhere to the following guidelines:
- Chaje: Chaj la voltages for cyclic and float applications are marked on the battery itself. Ensure your UPS system's charging parameters are compatible with these specifications.
- Tanperati: Operate the UPS system within its recommended temperature range. Extreme temperatures can significantly impact battery life.
- Jesyon chaj: Avoid consistently overloading the UPS, as this can stress the batteries and reduce their lifespan.
- Tès regilye: Periodically test your UPS system's battery backup function as recommended by the UPS manufacturer to ensure the batteries are holding a charge and providing adequate backup power.
Antretyen ak jete
These sealed lead-acid batteries are largely maintenance-free. However, proper handling and disposal are critical for safety and environmental responsibility.
- Netwayaj: Keep the battery terminals clean and free from corrosion. Use a dry cloth to wipe down the battery surfaces if necessary. Do not use solvents or abrasive cleaners.
- Enspeksyon: Periodically inspect the batteries for any signs of physical damage, swelling, or leakage. If any issues are observed, discontinue use and replace the batteries.
- Dispozisyon: Spent batteries must be disposed of properly according to local and federal regulations. Do not dispose of batteries in household waste. Many retailers and battery recycling centers offer free battery recycling services. Contact your local waste management facility or battery supplier for recycling options.
Avètisman: Do not short the battery terminals. Do not charge the battery in a sealed container. Do not expose to fire, explosive conditions, or heat above 40°C (104°F).
Depanaj
This section addresses common issues related to battery performance. For specific UPS system errors, refer to your Liebert PSP500-115 UPS manual.
- UPS Not Powering On After Battery Replacement:
- Ensure all battery connections are secure and correctly polarized (+ to + and - to -).
- Verify the UPS is connected to a live power outlet.
- Allow sufficient time for the batteries to charge after initial installation.
- Short Backup Time:
- Confirm the batteries have been fully charged.
- Check if the total load connected to the UPS exceeds its capacity.
- Ensure the ambient temperature is within the recommended operating range.
- Battery Swelling or Leakage:
- Immediately disconnect the batteries from the UPS.
- Do not attempt to recharge or reuse damaged batteries.
- Dispose of the batteries safely and according to local regulations.
If issues persist, consult the Liebert PSP500-115 UPS user manual or contact technical support for your UPS system.
Espesifikasyon pwodwi
| Atribi | Valè |
|---|---|
| Mak | SPS |
| Nimewo Modèl | 1280_4_UPS_9681 |
| Kalite batri | Asid plon sele (SLA) / Mat vè absòban (AGM) |
| Voltage | 12 Volts |
| Kapasite batri | 9 Amp Èdtan (9Ah) |
| Product Dimensions (per battery) | 5.94 x 2.56 x 3.7 pous |
| Item Weight (total for 4 pack) | 32 liv |
| Itilizasyon Rekòmande | UPS (Uninterruptible Power Supply) |
| Manifakti | Sigma Power Systems |
| Dat Premye Disponib | 30 oktòb 2014 |
Enfòmasyon sou Garanti
Specific warranty details for this SPS replacement battery product are not provided in the available information. Please refer to the product packaging or contact the seller directly for warranty terms and conditions.
Sipò ak Kontakte
For technical support regarding the SPS 12V 9Ah UPS Replacement Batteries, or for inquiries about battery recycling services, please contact your point of purchase or the manufacturer, Sigma Power Systems. Contact information for Sigma Power Systems can typically be found on their official websit la oubyen sou anbalaj pwodwi a.
For support related to your Liebert PSP500-115 UPS system, please refer to the Liebert manufacturer's support channels.
