Entwodiksyon
The DIRECTV RC72 Remote Control is designed to provide seamless control over your DIRECTV Genie DVRs and clients in RF (Radio Frequency) mode, and other DIRECTV-branded receivers and DVRs in IR (Infrared) mode. This remote is essential for 2014 and newer Toshiba DIRECTV-Ready TVs, offering advanced functionality and user-friendly operation.
Karakteristik kle yo enkli:
- Next-generation design with updated IR codes for modern televisions.
- Required for 2014 or newer Toshiba DIRECTV-ready TVs.
- Compatible with all DIRECTV-ready (RVU) televisions.
- Functions with older DIRECTV receivers when configured in IR mode.
- Provides on-screen tips to assist with button usage and programming.
Pwodwi souview
Imaj: Devan view of the DIRECTV RC72 Remote Control. The remote is black and white, with a black top section containing navigation and function buttons, and a white bottom section with a numeric keypad. The DIRECTV logo is at the bottom.
Enstalasyon ak pwogramasyon
The RC72 remote can operate in two primary modes: RF (Radio Frequency) for Genie DVRs and clients, and IR (Infrared) for older DIRECTV receivers and other devices like TVs and audio systems.
Pairing with DIRECTV Genie DVRs (RF Mode)
- Ensure your Genie DVR is powered on.
- Point the RC72 remote towards the Genie DVR.
- Peze epi kenbe la BÈN bouton ak a ANTRE button simultaneously until the green light at the top of the remote flashes twice.
- A message should appear on your TV screen confirming the remote is now paired in RF mode.
Programming for TV and Audio Devices (IR Mode)
To control your TV's power and volume, or other audio devices, you will need to program the remote using specific codes. The remote utilizes an extensive database of included codes.
- Turn on the device you wish to program (e.g., your TV).
- On the RC72 remote, press and hold the BÈN bouton ak a CHWAZI button simultaneously until the green light at the top of the remote flashes twice.
- Enter the 5-digit code for your TV brand. Common codes can be found in your DIRECTV receiver's on-screen menu under "Remote Control Setup" or on the DIRECTV support websit.
- After entering the code, point the remote at the TV and press the POUVWA button. If the TV turns off, the code is correct.
- If the TV does not turn off, repeat the process with another code for your brand until successful.
- To program an audio device, follow similar steps, but select the appropriate device type during the programming process.
Note: On-screen tips provided by your DIRECTV receiver can guide you through the programming process effectively.
Enstriksyon Operasyon
Familiarize yourself with the buttons and their functions for optimal use of your DIRECTV RC72 remote control.
Top Section Buttons
- ON/OFF: Powers your DIRECTV receiver and programmed TV on or off.
- GID: Montre gid pwogram lan.
- MENI: Accesses the main menu of your DIRECTV receiver.
- LIS: Displays your recorded programs list.
Navigation and Control Buttons (Center Section)
- Flèch direksyonèl (Anwo, Anba, Agoch, Adwat): Navigate through menus and guides.
- CHWAZI: Konfime yon seleksyon.
- Tounen: Retounen nan ekran oswa meni anvan an.
- Sòti: Sòti meni oswa ekran aktyèl la.
- ENFO: Displays information about the current program or selected item.
- Record (Red Dot): Initiates recording of the current program.
Volim ak kontwòl chanèl
- VOL (Volim Monte/Desann): Adjusts the volume of your programmed TV or audio device.
- CH (Chanèl Monte/Desann): Changes the channel on your DIRECTV receiver.
- Bèbè: Silenn odyo a.
- PREV: Retounen nan chanèl anvan an.
Kontwòl Lektur
- RETIRE: Rewinds playback.
- JWE/POZ: Jwe oswa mete yon poz kontni.
- AVANSE RAPID: Lektur avanse rapid.
- SISPANN: Sispann lekti.
Nimerik klavye
- 0-9: Used for direct channel entry and other numeric inputs.
- ENTER (input): Confirms numeric entries or switches to a specific input.
- Dash (-): Used for sub-channels or other specific functions.
Antretyen
Proper care will extend the life of your remote control.
- Netwayaj: Use a soft, dry cloth to clean the remote. Do not use liquid cleaners or abrasive materials.
- Ranplasman batri: When the remote's performance degrades or the indicator light no longer flashes, it's time to replace the batteries. The RC72 remote typically uses two AA batteries.
- Louvri kouvèti lòj batri a sou do remote la.
- Retire ansyen pil yo.
- Insert new AA batteries, ensuring correct polarity (+ and -).
- Fèmen kouvèti lòj batri a byen.
- Depo: Store the remote in a dry place away from extreme temperatures and direct sunlight.
Depanaj
If you encounter issues with your RC72 remote, try the following solutions:
| Pwoblèm | Kòz posib | Solisyon |
|---|---|---|
| Remote not responding to receiver. | Low batteries, remote not paired (RF), line of sight blocked (IR). | Replace batteries. Re-pair the remote with the receiver (see Setup section). Ensure no obstructions between remote and receiver/TV. |
| Remote controls receiver but not TV volume/power. | TV not programmed, incorrect TV code. | Re-program the remote for your TV using the correct 5-digit code (see Setup section). Try alternative codes for your TV brand. |
| Bouton yo kole oswa yo pa reponn. | Salte oswa debri anba bouton yo. | Clean the remote with a soft, dry cloth. Avoid spills. |
| Remote light flashes but no action. | Remote is sending a signal, but receiver/TV is not responding or is out of range. | Ensure receiver/TV is powered on. Move closer to the device. Check if the remote is in the correct mode (RF/IR). |
Espesifikasyon
| Karakteristik | Detay |
|---|---|
| Nimewo Modèl | FBA_RC72 |
| Mak | DIRECTV |
| Dimansyon pwodwi | 8.8 x 1.6 x 3.4 pous |
| Pwa atik | 4 ons |
| Koulè | Nwa, Blan |
| Karakteristik espesyal | Ergonomik |
| Max Kantite Aparèy Sipòte | 1 (main DIRECTV receiver, plus TV/audio device via programming) |
| Aparèy konpatib | DIRECTV Genie DVRs, DIRECTV-branded receivers, DIRECTV-ready (RVU) televisions, various televisions and audio devices (via IR programming) |
| Premye Dat ki disponib | 16 septanm 2014 |
Sipò
For further assistance, programming codes, or advanced troubleshooting, please refer to the official DIRECTV support resources:
- Visit the official DIRECTV website for support documentation and FAQs.
- Contact DIRECTV customer service for personalized assistance.
- Utilize the on-screen help features available through your DIRECTV receiver.
Note: Specific warranty information for this accessory may be available through your DIRECTV service provider or the point of purchase.
