Entwodiksyon
This manual provides detailed instructions for the installation, operation, and maintenance of your DS18 PRO-DKH1 2-inch Compression Driver with Aluminum Horn. Please read this manual thoroughly before using the product to ensure proper function and longevity.
Karakteristik pwodwi
- 2-Inch Competition Compression Driver: Designed for high-quality audio performance, featuring a titanium diaphragm, mylar capacitor crossover, and an aluminum horn.
- Pik pouvwa manyen: Capable of handling up to 640W maximum power and 320W program power, delivering robust audio output.
- High-Quality Magnets: Equipped with a 35 oz Ferrite magnet for a wide range of tones and high-volume power handling.
- Integrated Aluminum Horn: Includes a durable aluminum horn, ensuring optimal sound dispersion and aesthetic integration.
- Pèfòmans dirab: Engineered for long-lasting performance without excessive power draw from your amplifier.
Espesifikasyon
| Modèl | PRO-DKH1 |
| Kalite | Chofè konpresyon |
| RMS pouvwa | 600W |
| MAX pouvwa | 1000W |
| Sansiblite | 108dB |
| Gwosè bobin vwa | 2.03" |
| Enpedans | 8 Ohms |
| Repons Frekans | 800Hz - 18.5KHz |
| Materyèl dyafram | Titàn |
| Horn Material | Aliminyòm |
| Pwa leman | 35oz |
| Horn Dimensions | 157 x 157 x 132mm (6"D x 6"W x 7.75"H) |
| Dyamèt gòj | 2" |
| Pwofondè an jeneral | 123mm / 4.84" |
| Pwa atik | 7 liv |
| Konpozan ki enkli | Aluminum Horn |
Enstalasyon ak Enstalasyon
Bon enstalasyon enpòtan anpil pou pèfòmans ak sekirite optimal. Li rekòmande pou yon pwofesyonèl kalifye fè enstalasyon an.
Montaj
- Ensure the mounting surface is sturdy enough to support the weight of the compression driver (7 pounds).
- Refer to the product dimensions (6"D x 6"W x 7.75"H) and throat diameter (2") to prepare the mounting hole.
- Secure the compression driver using appropriate fasteners through the mounting holes on the horn.
Fil elektrik
- Connect the positive (+) terminal of the compression driver to the positive output of your amplifier.
- Connect the negative (-) terminal of the compression driver to the negative output of your amplifier.
- Asire w tout koneksyon yo byen fèm epi byen izole pou anpeche kous kout.
- It is recommended to use a high-pass filter (HPF) to protect the driver from low frequencies. A crossover that cuts frequencies below 800Hz is ideal for this unit.
Figure 1: DS18 PRO-DKH1 Compression Driver with Aluminum Horn.
Figure 2: Technical drawing showing dimensions and a frequency response graph for the PRO-DKH1.
Enstriksyon Operasyon
The DS18 PRO-DKH1 is designed to reproduce high frequencies with clarity and power. Follow these guidelines for optimal operation:
- Asire w amplifier is properly matched to the 8 Ohm impedance of the driver.
- Avoid exceeding the recommended RMS power of 600W to prevent damage.
- Use a high-pass filter (HPF) to prevent low-frequency signals from reaching the driver, which can cause distortion and damage.
- Gradually increase volume levels to prevent sudden peaks that could harm the driver or your hearing.
Antretyen
Regular maintenance helps ensure the longevity and performance of your compression driver.
- Netwayaj: Use a soft, dry cloth to wipe down the horn and driver body. Avoid using harsh chemicals or abrasive materials.
- Enspeksyon: Tcheke tout koneksyon fil elektrik yo detanzantan pou wè si yo sere epi si gen siy itilizasyon oswa korozyon.
- Anviwònman: Keep the driver in a dry environment, away from direct sunlight and extreme temperatures.
Depanaj
If you experience issues with your DS18 PRO-DKH1, refer to the following common problems and solutions:
| Pwoblèm | Kòz posib | Solisyon |
|---|---|---|
| Pa gen Son | Loose wiring, incorrect connections, amplifier off, damaged voice coil. | Check all wiring, ensure correct polarity, verify amplifier power, inspect voice coil for damage. |
| Son defòme | Overpowering, improper crossover settings, damaged diaphragm. | Diminye amplifier gain, verify HPF settings, inspect diaphragm for tears or creases. |
| Sorti ki ba | Incorrect impedance matching, low amplifier power, phase issues. | Asire w amplifier matches 8 Ohm impedance, check amplifier output, verify speaker phase. |
If problems persist, contact DS18 customer support or a qualified audio technician.
Product Demonstration (Related Model)
Video 1: Demonstration of the DS18 PRO-DRNSC1.5DK Neodymium Driver. While not the exact PRO-DKH1 model, this video provides a general overview and sound test of a related DS18 compression driver.
Garanti ak sipò
The DS18 PRO-DKH1 Compression Driver comes with a Garanti limite. For specific warranty terms, conditions, and duration, please refer to the warranty card included with your product or visit the official DS18 websit.
For technical support, service, or further inquiries, please contact DS18 customer service through their official channels. Keep your purchase receipt and product model number (PRO-DKH1) handy when contacting support.
