1. Pwodwi souview
This manual provides detailed instructions for the safe installation, operation, and maintenance of your Progress Lighting P6064-31 1-Light Wall Lantern. This fixture features an oval form factor with a grid overlay and etched glass shades, finished in black. It is designed for both outdoor and suitable indoor applications.
Figi 1: Devan view of the Progress Lighting P6064-31 Wall Lantern.
2. Enfòmasyon sou Sekirite
AVÈTISMAN: To avoid electric shock, ensure power is turned off at the circuit breaker or fuse box before installation or servicing. All wiring must be in accordance with national and local electrical codes. If you are unsure about wiring, consult a qualified electrician.
- Pa depase wat maksimòm lantage espesifye pou anpoul la.
- Manyen konpozan an vè yo avèk prekosyon pou evite yo kraze.
- Kenbe materyèl ki ka pran dife yo lwen aparèy limyè a.
3. Pake kontni
Verifye ke tout konpozan yo prezan anvan ou kòmanse enstalasyon an:
- Wall Lantern Fixture (P6064-31)
- Etched Glass Shade
- Twous Materyèl Mounting
- Fèy Enstalasyon
4. Espesifikasyon
| Karakteristik | Detay |
|---|---|
| Nimewo Modèl | P6064-31 |
| Mak | Pwogrè ekleraj |
| Fini Kalite | Finished (Black) |
| Dimansyon pwodwi | 16.13"L x 9.25"L x 6.13"H |
| Pwa atik | 4.63 liv |
| Kalite aliye | Ki vle pèse anvlòp la |
| Nivo rezistans dlo | Dlo rezistan |
| Sous limyè Wattage | 100 Watts (Max) |
| Voltage | 120 Volts |
| Maksimòm Pwodiksyon Limyè | 1600 Lumen |
| Kalite sous limyè | Incandescent (Medium Base) |
| Materyèl | Aliminyòm |
Figure 2: Product dimensions for the P6064-31 Wall Lantern.
5. Enstriksyon Enstalasyon
5.1 Pre-Enstalasyon
- Fèmen kouran nan disjoncteurs a oswa bwat fusible.
- Debalize aparèy la avèk atansyon epi enspekte li pou wè si li pa domaje.
- Asire w ke tout pyès ki nan lis nan Seksyon 3 yo prezan.
5.2 Sizing and Placement Guidance
Proper sizing and placement are crucial for optimal illumination and aesthetic appeal. Refer to the video below for visual guidance.
Video: Outdoor Lighting - Sizing and Selection. This video provides guidance on selecting the appropriate size and mounting height for outdoor lighting fixtures, including wall lanterns, for entryways and garages.
- Gwosè aparèy: For entrances and garages, select fixtures that measure 1/4 to 1/3 of the door's height.
- Wotè Montaj: Mount fixtures at eye level, approximately 5.5 to 6 feet from the ground to the fixture's center.
- Entrance Doors: Mount lights on either side of the door, 8 to 10 feet apart.
- Garage Doors: For a one-car garage, use a single wall lantern. For two or more car garages, mount lights on either side of the doors, or across the top of the doors for even illumination.
Figi 3: Egzample of wall lantern placement for an entryway.
Figi 4: Egzample of wall lantern placement for a garage.
5.3 Fil elektrik ak aliye
- Tache bracket aliye a nan bwat junction la lè l sèvi avèk vis yo bay yo.
- Connect the fixture's wires to the house wires: black to black (live), white to white (neutral), and bare copper (ground) to the house ground wire and the mounting bracket. Secure connections with wire nuts.
- Ak anpil atansyon mete tout fil nan bwat junction la.
- Align the fixture with the mounting bracket and secure it with the provided screws or nuts.
5.4 Enstalasyon anpoul
- Insert one medium base incandescent bulb (not included) into the socket.
- Pa depase wat maksimòm lantage nan 100 Watts.
- Install the etched glass shade by carefully placing it over the bulb and securing it according to the specific instructions on the included installation sheet.
6. Operasyon Enstriksyon
Once installed and powered, operate the wall lantern using the standard wall switch connected to the fixture's circuit. Ensure the bulb is correctly installed and the power is on at the circuit breaker.
7. Antretyen
Pou kenbe aparans ak fonksyonalite aparèy ou an:
- Netwayaj: Turn off power before cleaning. Wipe the fixture with a soft, damp twal. Pa sèvi ak pwodui netwayaj abrazif oswa solvan, paske yo ka domaje fini an oswa vit la.
- Ranplasman anpoul: Turn off power before replacing the bulb. Allow the bulb to cool completely. Replace with a new medium base incandescent bulb, not exceeding 100 Watts.
NAN. Depanaj
If your fixture is not operating correctly, refer to the following common issues:
| Pwoblèm | Kòz posib | Solisyon |
|---|---|---|
| Limyè pa limen | Pa gen pouvwa nan aparèy la | Check circuit breaker, wall switch, and wiring connections. |
| Anpoul boule | Ranplase anpoul la. | Ensure bulb is screwed in tightly. |
| Limyè flickering | Anpoul oswa koneksyon fil elektrik ki lach | Tighten bulb. Check wiring connections (with power off). |
| Fixture is dim | Wat anpoul ki pa kòrèktage | Asire w anpoul wattage is appropriate and not too low. |
9. Garanti ak sipò
This Progress Lighting fixture is covered by a 1-ane garanti limite. This warranty guarantees your complete satisfaction with your purchase and includes professional after-sales customer service support.
For warranty claims or technical assistance, please refer to the contact information provided on your purchase receipt or visit the official Progress Lighting websit.
