Prime TNOREM02

Manyèl Itilizatè Kontwòl Remot Eksteryè Prime TNOREM02 ak 2 Priz ak Transmetè San Fil

Model: TNOREM02

Entwodiksyon

The Prime TNOREM02 is an outdoor remote control system designed to provide convenient wireless operation for two grounded electrical devices. It includes a receiver unit with two 3-prong grounded outlets and a wireless transmitter (remote control) for switching connected devices on and off from a distance. This manual provides essential information for the safe and effective use of your Prime TNOREM02.

Prime TNOREM02 Outdoor Remote Control with Receiver and Transmitter

Image: The Prime TNOREM02 outdoor remote control system, showing the receiver unit with its power cord and the compact wireless transmitter.

Enfòmasyon sou Sekirite

Tanpri li epi konprann tout enstriksyon sekirite yo anvan ou itilize pwodui sa a. Si ou pa swiv enstriksyon sa yo, sa ka lakòz chòk elektrik, dife, oswa blesi grav.

Kontni pake

Verifye ke tout atik yo prezan nan pakè a:

Prime TNOREM02 Product Packaging

Image: The Prime TNOREM02 product packaging, showing the receiver and remote control clearly visible through the clear plastic.

Karakteristik pwodwi

Close-up of Prime TNOREM02 Receiver Outlets

Imaj: Yon gwo plan view of the Prime TNOREM02 receiver unit, highlighting the two 3-prong grounded outlets.

Enstalasyon

  1. Chwazi Kote: Choose a suitable outdoor location for the receiver unit. Ensure it is protected from direct heavy rain and positioned where its outlets face downwards.
  2. Branche reseptè a: Connect the receiver unit's grounded plug into a standard 3-prong outdoor electrical outlet.
  3. Konekte Aparèy: Plug the devices you wish to control into the two grounded outlets on the receiver unit. Ensure the total wattage of connected devices does not exceed 1875 Watts.
  4. Prepare Transmitter: The CR2032 3V button-cell battery is pre-installed in the wireless transmitter. If the remote does not respond, check the battery.
Prime TNOREM02 Outdoor Remote Control in Use

Image: The Prime TNOREM02 receiver unit installed outdoors, connected to two green extension cords, with a hand holding the remote control to operate connected lights.

Enstriksyon Operasyon

Using the Prime TNOREM02 is straightforward:

Antretyen

The Prime TNOREM02 requires minimal maintenance. The primary maintenance task is replacing the battery in the wireless transmitter.

Replacing the Transmitter Battery:

  1. Locate the battery compartment on the back of the wireless transmitter.
  2. Using a small screwdriver or coin, carefully open the battery compartment cover.
  3. Remove the old CR2032 3V button-cell battery.
  4. Insert a new CR2032 3V button-cell battery with the positive (+) side facing up.
  5. Ranplase kouvèti lòj batri a byen.
  6. Test the remote control to ensure it is functioning correctly.

Periodically inspect the receiver unit and its cords for any signs of damage, wear, or corrosion. Discontinue use if any damage is observed.

Depanaj

PwoblèmKòz posibSolisyon
Devices do not turn ON/OFF.
  • Transmitter battery is dead or incorrectly installed.
  • Receiver is not plugged in or not receiving power.
  • Devices plugged into receiver are not switched ON or are faulty.
  • Receiver is out of range of the transmitter.
  • Pwoteksyon surchaj la deklanche.
  • Replace the CR2032 battery in the transmitter, ensuring correct polarity.
  • Verify the receiver is securely plugged into a working outdoor outlet.
  • Ensure connected devices are in the ON position (if applicable) and functional.
  • Move closer to the receiver unit. Reduce obstructions between the transmitter and receiver.
  • Unplug devices, wait a few minutes, then plug them back in. Reduce the total load.
Reduced wireless range.
  • Obstak ant transmetè ak reseptè.
  • Weak transmitter battery.
  • Entèferans ki soti nan lòt aparèy san fil.
  • Deplase reseptè a oswa transmetè a pou minimize obstak yo.
  • Ranplase batri transmetè a.
  • Move the unit away from other strong wireless signals.
Unit stopped working after a period of use.
  • Echèk eleman entèn yo.
  • Exposure to extreme weather conditions (e.g., direct lightning strike).
  • Overload damage.
  • If basic troubleshooting fails, the unit may require replacement.
  • Ensure the unit is installed in a location that offers reasonable protection from severe weather.
  • Verify connected devices do not exceed the maximum electrical rating.

Espesifikasyon

KarakteristikDetay
Nimewo ModèlTNOREM02
MakPremye
Kantite plòg2 (3-prong grounded)
Kalite filSJTW 14/3 Gauge
Kalite plogeRight Angle, Grounded
ItilizasyonDeyò
Max Watts1875 Watts
Max Amps15 Amps
Max Volts125 Volts
Max Horsepower1 / 3 HP
Wireless RangeJiska 80 pye
Batri transmetèCR2032 3V Button-Cell
Dimansyon pwodwi8 x 6.2 x 2.1 pous (apeprè)
Pwa atik0.01 ounces (for remote control)
Koneksyon TeknolojiBluetooth
SètifikasyonNot explicitly detailed, but designed for outdoor electrical use.

Garanti ak sipò

Specific warranty information for the Prime TNOREM02 is not provided in the available product details. For warranty claims or technical support, please contact Prime customer service directly. Retain your proof of purchase for any warranty inquiries.

For further assistance, refer to the official Prime websit la oubyen kontakte chanèl sèvis kliyan yo.

Dokiman ki gen rapò - TNOREM02

Preview Gid Itilizatè ak Enfòmasyon sou Règleman PRIME SmartOutlets + Kontwòl Remote
Gid konplè pou PRIME SmartOutlets + Remote Control, ki kouvri konfigirasyon, resenkronizasyon, garanti, ak konfòmite avèk règleman FCC/IC. Aprann kijan pou itilize epi depanaj aparèy kay entelijan ou yo.
Preview Robine miray PRIME 2 priz ak chajè USB - Gid itilizatè ak garanti
Enstriksyon detaye, enfòmasyon sou règleman, ak detay sou garanti pou PRIME 2 Outlet Wall Robine ak chajè USB (Modèl USB05) ki soti nan Prime Wire & Cable, Inc.
Preview Inite Alimantasyon PRIME-750B: Gid Demaraj Rapid ak Enfòmasyon sou Sekirite
Comprehensive guide for the PRIME-750B power supply unit, covering essential safety information, installation steps, component connection, powering up instructions, and technical specifications. Includes details on electrical safety, ventilation, hardware compatibility, and protection features.
Preview Enfòmasyon sou Enstalasyon ak Sekirite PRIME SmartOutlets
Enstriksyon enstalasyon, enfòmasyon sekirite, ak espesifikasyon pou priz entelijan deyò PRIME SmartOutlets ki kontwole a distans. Gen ladan gid konfigirasyon, koneksyon aplikasyon an ak konfòmite règlemantè.
Preview Manyèl Itilizatè Reseptè Plug-in Prime TNRCCD21 ak Kontwòl Remot
Manyèl itilizatè konplè pou reseptè ploge Prime TNRCCD21 ak sistèm kontwòl remote la. Gen ladan l enstriksyon enstalasyon, gid operasyon, konsèy itil, ranplasman pil, konfòmite FCC/IC, ak enfòmasyon sou garanti.
Preview Minutè dijital pou andedan kay la Prime EZ-Set TNIDP12: Manyèl itilizatè ak enstriksyon pwogramasyon
User manual and instructions for the Prime EZ-Set Indoor Digital Timer (Model TNIDP12). Learn how to program custom on/off times, use preset options, countdown features, and understand safety guidelines and warranty information.