Entwodiksyon
The Fluke IR3000FC Infrared Connector is an accessory designed to enable wireless data transfer from compatible Fluke digital multimeters to a smartphone. This device facilitates remote monitoring and data logging, enhancing safety and efficiency in various measurement applications. This manual provides essential information for the proper setup, operation, and maintenance of your IR3000FC connector.
Pwodwi souview
Figure 1: Fluke IR3000FC Infrared Connector. This image shows the gray rectangular device with the Fluke logo and model name, a green power button, and a wireless signal indicator.
The IR3000FC connector is a compact, battery-powered device that attaches to the infrared (IR) port of compatible Fluke multimeters. It establishes a wireless connection, allowing measurement data to be viewed and recorded on a smartphone running the Fluke Connect application.
Enstalasyon
- Tcheke konpatibilite: Ensure your Fluke digital multimeter is compatible with the IR3000FC. This connector is designed for use with Fluke 189, 289, and 789 multimeters.
- Install Fluke Connect App: Download and install the Fluke Connect application on your smartphone. The app requires Android 4.3 or higher.
- Attach Connector: Carefully fit the IR3000FC connector over the infrared (IR) port of your compatible Fluke multimeter. Ensure a secure physical connection.
- Pouvwa sou: Press the power button on the IR3000FC connector to turn it on. The wireless signal indicator should illuminate.
- Pè ak Smartphone: Open the Fluke Connect app on your smartphone and follow the in-app instructions to pair with the IR3000FC connector. The app will detect available Fluke Connect devices.
Enstriksyon Operasyon
Once the IR3000FC is connected to your multimeter and paired with the Fluke Connect app, you can begin wireless data transfer.
- Live Data Streaming: The IR3000FC primarily supports live measurement streaming to your smartphone. This allows you to view real-time readings from your multimeter remotely.
- Anrejistre done: The Fluke Connect app allows for data recording. Note that there may be a 15-minute limit for continuous data capture via the app.
- Stored Data Retrieval: The IR3000FC connector is designed for live data transmission and does not support retrieving existing stored data directly from Fluke 287/289 multimeters.
- Aparèy miltip: The Fluke Connect app can connect to multiple Fluke Connect devices. However, it may not allow simultaneous display or connection to two similar devices (e.g., two Fluke 289 multimeters) at the same time.
Antretyen
- Netwayaj: Keep the connector clean and free from dust and debris. Use a soft, dry cloth for cleaning. Avoid abrasive cleaners or solvents.
- Depo: Store the IR3000FC in a dry environment when not in use.
- Mizajou mikrolojisyèl: The device is upgradeable via USB. Refer to the Fluke website or Fluke Connect app for information on available firmware updates and the update procedure.
Depanaj
| Pwoblèm | Kòz posib | Solisyon |
|---|---|---|
| Connector not powering on. | Battery depleted or faulty connection. | Ensure the connector is securely attached to the multimeter. Check multimeter battery status. |
| Cannot pair with Fluke Connect app. | Bluetooth/wireless interference, app issues, or incorrect pairing procedure. | Ensure Bluetooth is enabled on your smartphone. Restart the app and the IR3000FC. Verify app compatibility with your phone's operating system. |
| Data transfer stops after 15 minutes. | Application limitation. | This is a known limitation of the Fluke Connect app for continuous data capture. Restart recording if needed. |
| Cannot retrieve stored data from multimeter. | Product design limitation. | The IR3000FC is designed for live data streaming, not for retrieving previously stored data from the multimeter's internal memory. |
| App does not display multiple similar devices simultaneously. | Application limitation. | The Fluke Connect app may have limitations regarding simultaneous display of identical device models. |
If you encounter issues not covered here, please contact Fluke customer support for assistance.
Espesifikasyon
- Mak: Fluke
- Modèl: FLUKE-IR3000FC
- Sous pouvwa: Batri Powered
- Koulè: Nwa
- Pwa atik: 163 gram (5.7 ons)
- Dimansyon pwodwi (L x W x H): 4.33 x 4.13 x 2.36 pous
- Evalyasyon Tanperati Anwo: 50 Degre Sèlsiyis
- Kalite mezi: Enfrawouj
- Materyèl: Copper (for internal components)
- Eleman ki enkli: Inite, Gid Enstriksyon
- Konpatibilite: Fluke 189, 289, 789 multimeters
- Kondisyon pou aplikasyon an: Fluke Connect app (Android 4.3 or higher)
Enfòmasyon sou Garanti
The Fluke IR3000FC Infrared Connector comes with a manufacturer's warranty of 3 years. For detailed terms and conditions, please refer to the warranty documentation included with your product or visit the official Fluke websit.
Sipò
For technical assistance, product inquiries, or further support, please visit the official Fluke website or contact Fluke customer service. The product includes an instruction guide for additional information.
