TE CONNECTIVITY 5747846-4 D-Sub Receptacle Instruction Manual

1. Pwodwi souview

The TE CONNECTIVITY 5747846-4 is a 25-position D-Subminiature (D-Sub) female receptacle connector. This component is designed for reliable electrical connections in various industrial and electronic applications. It features female sockets, providing a secure interface for mating D-Sub male connectors. This manual provides essential information for the proper handling, installation, and maintenance of this connector.

2. Enfòmasyon sou Sekirite

• Always disconnect power to equipment before installing or removing connectors to prevent electrical shock.
• Handle components with care to avoid physical damage to pins or housing.
• Ensure proper grounding where applicable.
• Use appropriate tools for installation (e.g., soldering iron, crimping tool) and wear personal protective equipment (PPE) such as safety glasses.
• Refer to relevant industry standards and local regulations for electrical installations.

3. Enstalasyon ak Enstalasyon

Proper installation is crucial for the reliable performance of the D-Sub receptacle. Follow these steps for secure and effective integration:

3.1. Zouti ak Materyèl Nesesè yo

• Denude Fil
• Soldering iron and solder (if solder cup type) or crimping tool (if crimp type)
• Heat shrink tubing or insulation sleeves (optional, for added protection)
• Mounting hardware (screws, nuts, standoffs) if panel mounting

3.2. Etap enstalasyon yo

1. Prepare Fil: Strip the insulation from the wires to the appropriate length, typically 2-3mm, ensuring no stray strands.
2. Konekte fil yo:
   • For Solder Cup Connectors: Insert each stripped wire into its corresponding solder cup. Apply heat with a soldering iron and introduce solder to create a strong electrical and mechanical connection. Ensure no solder bridges between adjacent pins.
   • For Crimp Connectors: Crimp each wire to its respective contact using a suitable crimping tool. Insert the crimped contacts into the connector housing until they lock into place.
3. Enspekte Koneksyon: Visually inspect all connections for proper soldering/crimping, correct wire routing, and absence of short circuits.
4. Montaj (si sa aplikab): If the connector is designed for panel mounting, secure it using appropriate screws and nuts. Ensure the connector is flush and stable.
5. Akoupman: Carefully align the D-Sub receptacle with its mating male connector. Push them together firmly until fully seated. Secure with locking screws if available.

Figi 1: Image of the TE CONNECTIVITY 5747846-4 25 Position D-Sub Receptacle. This image shows the female socket configuration, designed for secure electrical connections in industrial and electronic applications. The connector features multiple pins for data and power transmission.

4. Operasyon Enstriksyon

The TE CONNECTIVITY 5747846-4 D-Sub receptacle is a passive electrical component. Once properly installed and mated with a compatible male connector, it facilitates the transmission of electrical signals or power between connected devices. No specific operational steps are required beyond ensuring a secure and correct connection.

5. Antretyen

Minimal maintenance is required for this D-Sub receptacle. Regular inspection can help ensure long-term reliability.

• Enspeksyon vizyèl: Periodically check the connector for any signs of physical damage, corrosion, or loose connections.
• Netwayaj: If necessary, gently clean the contact areas with a lint-free cloth and a small amount of isopropyl alcohol. Ensure the connector is completely dry before re-mating. Avoid using abrasive cleaners or solvents.
• Pwoteksyon anviwònman: Ensure the connector is used within its specified environmental conditions (temperature, humidity) to prevent degradation.

NAN. Depanaj

If you experience issues after installation, consider the following common troubleshooting steps:

7. Espesifikasyon

8. Garanti ak sipò

For specific warranty information and technical support regarding the TE CONNECTIVITY 5747846-4 D-Sub Receptacle, please refer to the official TE CONNECTIVITY website or contact their customer service directly. Warranty terms typically cover manufacturing defects under normal use conditions.

TE CONNECTIVITY Official Websit: www.te.com