Pwodwi souview
The Planet GT-806A15 is a high-performance 10/100/1000Base-T to WDM Bi-Directional Fiber Converter. This device facilitates the conversion of electrical Ethernet signals to optical fiber signals, enabling long-distance network connections over single-mode fiber. It supports Gigabit Ethernet speeds and uses WDM (Wavelength Division Multiplexing) technology for bi-directional data transmission over a single fiber strand, extending network reach up to 15 kilometers.
Figure 1: Planet GT-806A15 Bi-Directional Fiber Converter. This image displays the Planet GT-806A15, a compact black rectangular fiber converter. On its left side, it features a WDM fiber port. The front panel includes an RJ45 Ethernet port and a series of LED indicators: Fiber LNK/ACT, TP LNK/ACT, LFP, PWR, 1000, ACT, and LNK. The top surface of the device is embossed with the "PLANET" logo and has a label indicating "Gigabit Ethernet Bridge 10/100/1000Base-T to 1000Base-LX".
Enstriksyon Enstalasyon
-
Depake aparèy la: Carefully remove the GT-806A15 converter and its accessories from the packaging. Verify all components are present.
-
Koneksyon pouvwa: Connect the provided power adapter to the DC input port on the converter. Plug the other end of the power adapter into a standard electrical outlet. The PWR LED indicator should illuminate, indicating the device is receiving power.
-
Koneksyon Ethernet: Connect an Ethernet cable from your network device (e.g., switch, router, computer) to the RJ45 port on the GT-806A15. Ensure the TP LNK/ACT LED illuminates, indicating a valid Ethernet link.
-
Fiber Optic Connection: Connect a single-mode fiber optic cable to the WDM fiber port on the converter. Ensure the other end of the fiber cable is connected to a compatible fiber device (e.g., another GT-806A15 or a fiber switch). The Fiber LNK/ACT LED should illuminate when a stable fiber link is established.
-
Verifye Koneksyon: Once all connections are made, observe the LED indicators to confirm proper operation. Both the TP LNK/ACT and Fiber LNK/ACT LEDs should be lit and blinking to indicate data activity.
Opere Aparèy la
The GT-806A15 operates automatically once properly connected. Its primary function is to transparently convert Ethernet signals between copper and fiber media. Monitoring the LED indicators provides insight into the device's status and network activity.
Endikatè ki ap dirije:
- PWR: Endike estati pouvwa.
- Vèt (solid): Aparèy limen.
- Fiber LNK/ACT: Indicates the status of the fiber optic link.
- Vèt (solid): Yon lyen fib ki valab etabli.
- Vèt (Ap flache): Data activity on the fiber link.
- Off: No fiber link detected or link failure.
- TP LNK/ACT: Indicates the status of the twisted-pair (RJ45) Ethernet link.
- Vèt (solid): A valid Ethernet link is established.
- Vèt (Ap flache): Data activity on the Ethernet link.
- Off: No Ethernet link detected or link failure.
- LFP (Link Fault Pass-Through): Indicates LFP function status.
- Vèt (solid): LFP function is enabled.
- Off: LFP function is disabled.
- 1000: Indicates the speed of the twisted-pair (RJ45) Ethernet link.
- Vèt (solid): Link speed is 1000Mbps (Gigabit Ethernet).
- Off: Link speed is 10/100Mbps.
Antretyen
The Planet GT-806A15 is designed for reliable operation with minimal maintenance. Follow these guidelines to ensure optimal performance and longevity:
- Netwayaj: Sèvi ak yon twal mou epi sèk pou netwaye deyò aparèy la. Pa sèvi ak pwodui netwayaj likid oswa ayewosòl.
- Vantilasyon: Ensure the ventilation holes on the device are not obstructed to prevent overheating.
- Anviwònman: Operate the device within its specified environmental conditions (temperature, humidity) to avoid damage.
- Jesyon kab: Ensure all cables are securely connected and not under undue strain. Avoid sharp bends in fiber optic cables.
Depanaj
If you encounter issues with your GT-806A15 converter, refer to the following common problems and solutions:
| Pwoblèm | Kòz posib | Solisyon |
|---|---|---|
| Pa gen kouran (LED PWR etenn) | Adaptè kouran an pa konekte oswa li gen pwoblèm; pwoblèm priz kouran. | Check power adapter connection. Try a different power outlet. Ensure the adapter is the correct one for the device. |
| No Fiber Link (Fiber LNK/ACT LED Off) | Fiber cable disconnected, damaged, or incorrect type; incompatible fiber device at other end. | Verify fiber cable connections at both ends. Inspect cable for damage. Ensure the connected device is compatible (e.g., another GT-806A15 or compatible fiber equipment). Clean fiber connectors if necessary. |
| No Ethernet Link (TP LNK/ACT LED Off) | Ethernet cable disconnected, damaged, or incorrect type; connected device is off or faulty. | Check Ethernet cable connections. Try a different Ethernet cable. Ensure the connected network device is powered on and functioning correctly. |
| Vitès rezo ba | Cable quality issue; network congestion; device auto-negotiation problem. | Ensure you are using Cat5e/6 or better Ethernet cables. Check for network congestion. Verify the 1000 LED is lit for Gigabit speed. |
Espesifikasyon
- Nimewo Modèl: GT-806A15
- Mak: Planèt
- Dimansyon pwodwi: 1.1 x 9.7 x 6.5 pous (2.79 x 24.64 x 16.51 cm)
- Pwa atik: 10.58 ons (299.95 gram)
- Kalite montaj: Sifas mòn
- Materyèl: Kwiv
- Manifakti: Planèt
- GTIN (Nimewo Idantifikasyon Komès Mondyal): 04711213686894
- Kalite fib: WDM Bi-Directional Single-Mode
- Longèdonn: 1310nm (Tx) / 1550nm (Rx)
- Distans Max: 15 KM
- Estanda Ethernet: 10/100/1000Base-T
Garanti ak sipò
For detailed warranty information and technical support, please refer to the official Planet Technology website or contact your local distributor. Warranty terms and conditions may vary by region and product. It is recommended to register your product upon purchase to facilitate support services.
For further assistance, please visit the manufacturer's support page or consult the full product manual typically available for download from the Planet Technology websit.
Note: This manual provides general guidance. Specific features and troubleshooting steps may be detailed further in the complete product documentation.
