Entwodiksyon
This manual provides comprehensive instructions for the installation, operation, and maintenance of your Soundstream P4.800 800W 4-Channel Picasso Series Class A/B Amplifier. To ensure optimal performance and safety, please read this manual thoroughly before attempting to install or operate the amplifier. Kenbe manyèl sa a pou referans nan lavni.
Enfòmasyon sou Sekirite
Toujou obsève prekosyon sekirite sa yo pou evite blesi oswa domaj nan amplifyè ak konpozan konekte:
- Enstalasyon pwofesyonèl rekòmande: Installation of car audio components requires experience with electrical wiring and automotive procedures. If you are unsure, consult a qualified professional installer.
- Dekoneksyon pouvwa: Always disconnect the vehicle's negative battery terminal before starting any installation work to prevent electrical shorts.
- Bon vantilasyon: Asire w la amplifier is mounted in a location that allows for adequate air circulation to prevent overheating. Do not cover the amplifyè ak tapi oswa lòt materyèl.
- Fil elektrik kòrèk: Use appropriate gauge wiring for power, ground, and speaker connections as specified in this manual. Incorrect wiring can lead to fire or equipment damage.
- Pwoteksyon Fuse: Toujou itilize bon klasman fizib la pou amplifier. Never replace a fuse with one of a higher rating.
- Evite imidite: Pa ekspoze a amprezistans nan imidite oswa dlo.
Kontni pake
Verifye ke tout atik yo prezan nan pakè a:
- Soundstream P4.800 Amplifier Inite
- Materyèl pou monte (vis)
- Manyèl Itilizatè (dokiman sa a)
Pwodwi souview
The Soundstream P4.800 is a high-performance 4-channel Class A/B amplifier from the Picasso Series, designed to deliver powerful and clear audio to your vehicle's speaker system. It features a Pulse Width Modulated (PWM) MOSFET power supply for efficient operation and a heavy-duty aluminum heat sink for effective thermal management.
Figi 1: Top view of the Soundstream P4.800 amplaviyè, montreasing its sleek design and robust aluminum heat sink for optimal cooling.
Figi 2: Dèyè view of the Soundstream P4.800 amplifier, detailing the control panel with LPF, X-OVER, HPF, Level, Bass Boost adjustments, High Level and Low Inputs, and power/protect indicators.
Enstalasyon ak Enstalasyon
Bon enstalasyon enpòtan anpil pou amplifier's performance and longevity. Refer to Figure 2 for connection points.
1. Kote aliye
- Chwazi yon kote ki sèk, byen ayere, lwen limyè solèy dirèk ak sous chalè.
- Asire ase espas toutotou a amplifier pou sikilasyon lè.
- Monte la amplifier securely using the provided hardware to prevent movement during vehicle operation.
2. Koneksyon pouvwa
- Battery (+12V): Connect a heavy-gauge power cable (e.g., 4-gauge) directly from the vehicle's positive battery terminal to the amptèminal +12V batri a. Enstale yon pòt-fizib an liy nan yon distans 18 pous (45 cm) ak batri a.
- Tè (GND): Konekte yon kab tè epè ki menm longè ak kab kouran an ki soti nan ampKonekte tèminal GND adaptè a sou yon sifas metal pwòp, ki pa pentire sou chasi machin nan. Asire w ke koneksyon elektrik la byen solid.
- Kontwòl a distans (REM): Connect a smaller gauge wire from the ampKonekte tèminal REM lifizè a nan pwodiksyon limen a distans inite prensipal ou a. Fil sa a vire amplimen epi etenn lifijè a ak stereo ou a.
3. Koneksyon Oratè
The P4.800 is a 4-channel amplifier. It can power four speakers or be bridged to power two speakers at higher power.
- 4-chanèl mòd: Connect each speaker's positive (+) and negative (-) terminals to the corresponding CH1, CH2, CH3, and CH4 speaker outputs on the ampAsire w ke polarite a kòrèk.
- Mòd Pon (2-Chanèl): For higher power output to two speakers (e.g., subwoofers), bridge channels. Connect the positive (+) terminal of the speaker to the CH1+ terminal and the negative (-) terminal of the speaker to the CH2- terminal for the first bridged pair. Repeat for CH3+ and CH4- for the second pair. Refer to the amplifier's markings for specific bridging instructions. Minimum impedance for bridged mode is typically 4 ohms per bridged channel.
4. Antre siyal
- Antre Nivo Ba (RCA): If your head unit has RCA pre-outs, connect RCA cables from the head unit's front and rear outputs to the amplifier's LOW INPUTS (CH1/CH2 and CH3/CH4).
- Antre wo nivo: If your head unit does not have RCA pre-outs, use the HIGH LEVEL inputs. Connect the speaker wires from your head unit's speaker outputs to the amplifier's HIGH LEVEL input terminals using the provided connectors.
Enstriksyon Operasyon
Yon fwa enstale, ajiste a amplifier settings for optimal sound.
1. Premye Limen
- Apre tout koneksyon yo fin fèt, konekte tèminal negatif batri machin nan ankò.
- Limen inite prensipal ou a. amplifier's POWER indicator (green LED) should illuminate. If the PROTECT indicator (red LED) illuminates, refer to the Troubleshooting section.
2. Adjusting Controls (Refer to Figure 2)
- Level (Gain): Kontwòl sa a matche ak la amplifier's input sensitivity to the output level of your head unit. Start with the level set to minimum. Play a familiar track at about 75% of your head unit's maximum volume. Slowly increase the amplifier's level until you hear distortion, then back off slightly.
- X-OVER (Crossover Switch): Select the desired crossover mode:
- KONPLÈ: Full range audio output (no filtering).
- HPF (Filtè Pase-wo): Allows frequencies above the set point to pass, blocking lower frequencies. Useful for protecting smaller speakers from bass.
- LPF (Filtè Low-Pass): Allows frequencies below the set point to pass, blocking higher frequencies. Essential for subwoofers.
- HPF (High-Pass Filter) Control: If HPF is selected, adjust this knob to set the cutoff frequency (50Hz - 4kHz).
- LPF (Low-Pass Filter) Control: If LPF is selected, adjust this knob to set the cutoff frequency (50Hz - 4kHz).
- Bass ranfòse: Provides an adjustable bass boost (0 to +12 dB) at 50 Hz. Use sparingly to avoid distortion and speaker damage.
Antretyen
The Soundstream P4.800 ampLifter mande pou minimòm antretyen.
- Netwayaj: Siye detanzantan ampNetwaye deyò aparèy la avèk yon twal mou epi sèk. Pa sèvi ak pwodui chimik ki agresif oswa pwodui netwayaj abrazif.
- Enspeksyon: Regularly check all wiring connections for tightness and corrosion. Ensure adequate ventilation around the amplifier.
Depanaj
Si ou fè eksperyans pwoblèm ak ou amplifier, consult the table below before contacting support.
| Pwoblèm | Kòz posib | Solisyon |
|---|---|---|
| Pa gen kouran (LED kouran an etenn) | Fuzib boule, koneksyon kouran/tè a pa bon, pa gen siyal a distans. | Check in-line fuse and amplifier fuses. Verify +12V, GND, and REM connections. Ensure head unit is on. |
| Protect LED On (Red) | Overheating, speaker short circuit, impedance too low. | Pèmèt amplifier to cool. Check speaker wiring for shorts. Verify speaker impedance is within amplifier's specifications. Ensure proper ventilation. |
| Pa gen Sòti Son | RCA cables disconnected, gain too low, speaker wires disconnected. | Check RCA connections at head unit and amplifier. Adjust gain control. Verify speaker wire connections. |
| Son defòme | Gain set too high, poor ground, damaged speakers. | Reduce gain level. Check ground connection. Inspect speakers for damage. |
Espesifikasyon
Detailed technical specifications for the Soundstream P4.800 amplifier:
- Modèl: P4.800
- Chanèl: 4-Chanèl
- Amplifier Gwoup: Klas A/B
- Rating pouvwa RMS:
- 4 ohms: 125 watts x 4 channels
- 2 ohms: 200 watts x 4 channels
- 4 ohms, Bridged: 400 watts x 2 channels
- Max pouvwa Sòti: 800 wat
- Varyab pou ranfòse bas: 6 to +12 dB at 50 Hz
- Variable Low-Pass Filter (LPF): 50-4,000 Hz, 24 dB/octave
- Variable High-Pass Filter (HPF): 50-4,000 Hz, 24 dB/octave
- Filtè subsonik: 24 dB at 15-40 Hz
- Pwovizyon pou pouvwa: Pulse Width Modulated (PWM) MOSFET
- Dissipateur chalè: Aliminyòm lou-devwa
- Dimansyon pwodwi (L x W x H): 48.26 x 20.96 x 5.08 cm (19 x 8.25 x 2 pous)
- Pwa: 2.27 kg (5 liv)
- Kalite montaj: Sifas mòn
- UPC: 709483042285
Garanti ak sipò
Soundstream products are designed and manufactured to the highest quality standards. For information regarding warranty coverage, terms, and conditions, please refer to the warranty card included with your product or visit the official Soundstream website. For technical support or service inquiries, please contact Soundstream customer service through their official channels.
