1. Entwodiksyon
This manual provides detailed instructions for the installation, operation, and maintenance of your Powerbass S-60C 6.5-inch Component OEM Replacement Speaker system. Please read this manual thoroughly before attempting installation or operation to ensure proper function and longevity of your product.
Figure 1: Powerbass S-60C Component Speaker System
2. Enfòmasyon sou Sekirite
Obsève règ sekirite sa yo pandan enstalasyon ak operasyon:
- Toujou dekonekte batri machin nan anvan ou kòmanse nenpòt enstalasyon elektrik.
- Asire w ke tout fil elektrik yo byen izole pou anpeche kous kout.
- Mount speakers securely to prevent them from becoming loose during vehicle operation.
- Avoid installing speakers in locations that obstruct vehicle controls or safety devices.
- Pa sèvi ak oratè yo nan yon volim twò wo pandan yon peryòd pwolonje, paske sa ka lakòz pwoblèm tande oswa domaj nan oratè yo.
- If you are unsure about any part of the installation process, consult a qualified professional car audio installer.
3. Pake kontni
Verifye ke tout atik yo prezan nan pakè ou a:
- 6.5-inch Woofers (2)
- Tweeters (2)
- Crossover Networks (2)
- Materyèl pou monte (vis, klip, elatriye)
Figure 2: Individual Component Speaker Set
4. Enstalasyon ak Enstalasyon
The Powerbass S-60C is a component speaker system designed for OEM replacement. Proper installation is critical for optimal performance. Professional installation is recommended.
4.1 Konpozan Plis paseview
Your S-60C system includes:
- grav: The 6.5-inch speaker responsible for mid-range and bass frequencies.
- Tweeter: The smaller speaker designed for high-frequency sounds.
- Rezo kwazman: This device separates the audio signal, sending appropriate frequencies to the woofer and tweeter.
Figure 3: S-60C Woofer
Figure 4: S-60C Tweeters
4.2 Montaj
The 6.5-inch woofers are designed for flush mounting in standard vehicle speaker locations. The tweeters can be flush-mounted or surface-mounted depending on your vehicle's interior and desired sound staging. Ensure adequate clearance behind the mounting surface for the speaker's magnet structure.
Figure 5: S-60C Woofer Dimensions
4.3 fil elektrik
Each component set requires connection to a crossover network. The crossover has clearly marked terminals for 'INPUT' (from amplifier), 'WOOFER' (to woofer), and 'TWEETER' (to tweeter). Observe correct polarity (+ and -) for all connections to ensure proper sound reproduction.
- Konekte a amplifier's speaker output to the 'INPUT' terminals on the crossover network.
- Connect the woofer to the 'WOOFER' terminals on the crossover network.
- Connect the tweeter to the 'TWEETER' terminals on the crossover network.
Use appropriate gauge speaker wire for all connections. Consult your vehicle's wiring diagram or a professional installer if you are unsure about speaker wire routing or connections.
5. Operasyon Enstriksyon
Once installed, your Powerbass S-60C speakers will operate as part of your vehicle's audio system. Ensure your amplifier's gain settings are properly adjusted to prevent distortion and speaker damage. The speakers have a maximum output power of 140 Watts and an impedance of 4 Ohm. Avoid exceeding these limits.
For optimal sound quality, consider adjusting the equalizer settings on your head unit or amplifier to complement the acoustic characteristics of your vehicle's interior.
6. Antretyen
The Powerbass S-60C speakers require minimal maintenance. Follow these guidelines:
- Keep the speaker cones free from dust and debris. Use a soft, dry cloth for cleaning.
- Avoid exposing speakers to excessive moisture or direct sunlight for prolonged periods.
- Tcheke tout koneksyon fil elektrik yo regilyèman pou wè si yo sere epi si gen korozyon.
- Do not apply any chemicals or solvents to the speaker components.
NAN. Depanaj
If you experience issues with your Powerbass S-60C speakers, refer to the following table:
| Pwoblèm | Kòz posib | Solisyon |
|---|---|---|
| Pa gen son ki soti nan oratè | Fil elektrik ki lach oswa ki pa kòrèk; Amplifier off or faulty; Head unit issue; Speaker damaged. | Check all wiring connections and polarity. Verify amplifier and head unit are functioning. Test speaker with another audio source if possible. |
| Son defòme | Amplifier gain too high; Incorrect crossover settings; Speaker damaged; Poor quality audio source. | Diminye amplifier gain. Ensure crossover is correctly wired. Check audio source quality. If distortion persists, speaker may be damaged. |
| Yon oratè pa travay | Wiring issue to that specific speaker or crossover; Speaker damaged. | Inspect wiring to the non-working speaker and its crossover. Swap speakers (if safe) to determine if the issue is with the speaker or wiring/crossover. |
If troubleshooting steps do not resolve the issue, contact Powerbass customer support or a qualified service technician.
8. Espesifikasyon
| Karakteristik | Detay |
|---|---|
| Non modèl | S-60C |
| Kalite Oratè | Eleman |
| Gwosè Oratè | 6.5 pous (woofer) |
| Materyèl | 2 layer paper DDC cone / silk dome tweeter |
| Enpedans | 4 Ohm |
| Oratè maksimòm pwodiksyon pouvwa | 140 Watts |
| Repons Frekans | 60 Hz (Limit ki pi ba) |
| Kalite aliye | Flush Mount |
| Dimansyon pwodwi | 4"P x 17.6"L x 10"H (Anbalaj) |
| Pwa atik | 1 liv (pa seri) |
| Konpozan ki enkli | Car Speakers - Component Systems |
9. Garanti ak sipò
Your Powerbass S-60C speakers come with a Limited or Full Warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Powerbass websit la. Kenbe prèv acha ou pou reklamasyon garanti.
For technical support, service, or questions regarding your product, please contact Powerbass customer service directly. Contact information can typically be found on the Powerbass websit oswa anbalaj pwodwi a.
