Entwodiksyon
This manual provides essential information for the proper installation, operation, and maintenance of your Infinity Primus PR6510CS 6.5-inch 2-Way Car Component Speakers System. Please read this manual thoroughly before attempting installation or use to ensure optimal performance and safety.
Enfòmasyon sou Sekirite
- Toujou dekonekte tèminal negatif batri machin nan anvan ou kòmanse nenpòt travay elektrik pou evite kous kout.
- Ensure all wiring is properly insulated and secured to prevent damage from vibration or sharp edges.
- Do not mount speakers or components in locations that obstruct vehicle operation, airbags, or visibility.
- Sèvi ak ekipman pwoteksyon pèsonèl ki apwopriye, tankou linèt sekirite, pandan enstalasyon an.
- If you are unsure about any part of the installation process, consult a qualified professional car audio installer.
- Avoid prolonged exposure to high volume levels, which can cause hearing damage.
Kontni pake
Verifye ke tout atik yo prezan nan pakè ou a:
- De (2) woofè 6.5 pous
- De (2) Tweeter
- De (2) kwazman ekstèn
- Mounting Hardware (screws, clips, grilles, tweeter mounting cups)
- Speaker Wire (may vary by package)
- Manyèl itilizatè

Image: The Infinity Primus PR6510CS component speaker system, showing a woofer, tweeter, and crossover.
Enstalasyon ak Enstalasyon
Proper installation is crucial for optimal sound quality and system longevity. This section outlines general steps for installing your component speaker system.
1. Planifikasyon ak Preparasyon
- Seleksyon kote: Identify suitable mounting locations for the woofers, tweeters, and crossovers in your vehicle. Woofers are typically installed in factory door locations. Tweeters can be flush-mounted, surface-mounted, or angle-mounted in door panels or A-pillars for optimal sound staging. Crossovers should be mounted in a dry, secure location, often inside door panels or under the dashboard.
- Vehicle Disassembly: Carefully remove door panels, trim pieces, or other components necessary to access speaker mounting locations and run wiring.
- Chemen fil elektrik: Plan the routing of speaker wires from your amplifier/head unit to the crossover, and from the crossover to the woofer and tweeter. Avoid routing wires near sharp edges or moving parts.
2. Enstalasyon Woofer
- Mount the 6.5-inch woofers into the designated speaker openings. Use the provided mounting screws and ensure a secure fit. Adapters or spacers may be required for some vehicle applications.
- Ensure the woofer cone has sufficient clearance and does not contact any part of the door panel or window mechanism.
3. Enstalasyon Tweeter
- Choose the appropriate tweeter mounting method (flush, surface, or angle) based on your vehicle and desired sound.
- Carefully cut any necessary holes for flush mounting, ensuring the hole size matches the tweeter housing.
- Secure the tweeters using the provided hardware.
4. Crossover Installation and Wiring
- Mount the passive crossovers in a secure, dry location.
- Konekte fil oratè a soti nan ou amplifier or head unit's output to the "INPUT" terminals on the crossover. Observe correct polarity (+ to + and - to -).
- Connect the woofer to the "WOOFER" or "MID" terminals on the crossover.
- Connect the tweeter to the "TWEETER" or "HIGH" terminals on the crossover.
- Ensure all connections are tight and properly insulated.
5. Tès ak Reasanblaj
- Before reassembling vehicle panels, temporarily reconnect the battery and test the system at a low volume to ensure all speakers are functioning correctly and polarity is correct.
- Once confirmed, disconnect the battery again, secure all wiring, and reassemble the vehicle's interior components.
Enstriksyon Operasyon
Your Infinity Primus PR6510CS speakers are designed to deliver clear and dynamic audio. Follow these guidelines for optimal operation:
- Manyen pouvwa: These speakers have a peak power handling of 480 watts per set (240 watts each side) and an RMS power handling of 160 watts per set (80 watts each side). Ensure your amplifier's output matches these specifications to prevent damage.
- Enpedans: The speakers feature a 2.7-ohm impedance. This design allows the speakers to draw maximum power from your amplifier or head unit, resulting in increased output. Ensure your ampLififikatè a estab nan enpedans sa a.
- Anviwònman odyo: Adjust your head unit's equalizer and crossover settings to fine-tune the sound. Start with flat settings and make small adjustments to suit your preferences.
- Peryòd enskripsyon: Allow a short break-in period (typically 10-20 hours of normal listening) for the speaker components to loosen up and achieve their full sound potential.
Antretyen
Minimal maintenance is required for your speakers:
- Netwayaj: Gently wipe speaker grilles and surrounds with a soft, damp twal pou retire pousyè ak pousyè tè. Evite itilize pwodui chimik piman bouk oswa pwodui netwayaj abrazif.
- Enspeksyon: Periodically check speaker connections and mounting hardware for tightness. Ensure no wires are frayed or exposed.
- Faktè anviwònman: While designed for automotive use, avoid exposing speakers to excessive moisture or extreme temperatures beyond normal vehicle operating conditions.
Depanaj
Si w gen pwoblèm ak oratè w yo, gade pwoblèm ak solisyon komen sa yo:
| Pwoblèm | Kòz posib | Solisyon |
|---|---|---|
| Pa gen son ki soti nan youn oubyen plizyè oratè | Loose or disconnected wiring; incorrect crossover connection; amplifier issue; head unit issue. | Check all speaker wire connections at the head unit, amplifier, crossover, woofer, and tweeter. Ensure correct polarity. Verify amplifier and head unit are powered on and functioning. |
| Son defòme oswa ki pa klè | Overpowering speakers; incorrect gain settings on amplifier; loose speaker mounting; damaged speaker cone; incorrect crossover settings. | Reduce volume. Check amplifier gain settings (start low and increase gradually). Ensure speakers are securely mounted. Inspect speaker cones for physical damage. Verify crossover settings on head unit/amplifier are appropriate. |
| Lack of bass or treble | Incorrect crossover wiring; incorrect head unit EQ settings; phase issues. | Double-check crossover connections for woofer and tweeter. Adjust head unit EQ settings. Ensure all speakers are wired with correct polarity. |
Espesifikasyon
Key technical specifications for the Infinity Primus PR6510CS speakers:
- Kalite oratè: 6.5-inch 2-Way Component System
- Manyen pouvwa (RMS): 80 Watts per speaker (160 Watts per set)
- Manyen pouvwa (pik): 240 Watts per speaker (480 Watts per set)
- Enpedans: 2.7 Ohms
- Repons frekans: 53 Hz - 20,000 Hz
- Sansiblite: 88dB
- Top-mount Depth: 2-1/16 pous
- Materyèl woofer: Polypropylène
- Koneksyon Teknoloji: Filaire (Koaksyal)
- Dimansyon pwodwi: Apeprè 6 x 8 x 15 pous (anbalaj)
- Pwa atik: Apeprè 5 liv
Garanti ak sipò
Your Infinity Primus PR6510CS speakers come with a limited warranty. For specific details regarding warranty coverage, duration, and terms, please refer to the warranty card included with your product or contact Infinity customer support.
For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact the authorized Infinity service center or your retailer.





