Trust ACM-1000 Wireless Built-in Switch User Manual

1. Entwodiksyon

This manual provides detailed instructions for the installation, operation, and maintenance of your Trust ACM-1000 Wireless Built-in Switch. Please read this manual carefully before installation and use to ensure safe and correct operation. Keep this manual for future reference.

The Trust ACM-1000 is designed to wirelessly control lights or other electrical devices up to 1000W. Its compact design allows for discreet installation in various locations.

2. Enfòmasyon sou Sekirite

AVÈTISMAN: Electrical installation should only be performed by a qualified electrician. Always disconnect power at the main fuse box before performing any electrical work.

• Asire ke ekipman pou pouvwa a dekonekte anvan enstalasyon oswa antretyen.
• Pa depase kapasite chaj maksimòm 1000W la.
• This device is designed for indoor use unless installed within an appropriate IP44 rated waterproof junction box for outdoor applications.
• Keep the device away from moisture, extreme temperatures, and direct sunlight.
• Do not attempt to repair or modify the device yourself. Contact qualified service personnel.

3. Pwodwi souview

The Trust ACM-1000 is a compact wireless receiver designed to be integrated into your existing electrical system.

Figi 1: Devan view of the Trust ACM-1000 Wireless Built-in Switch. This image shows the compact, white casing of the switch, with visible wiring terminals at the bottom, a fuse compartment, and an indicator light. The overall design is circular with flat sides for mounting.

3.1 Eleman

• Tèminal pouvwa: For connecting live (L) and neutral (N) wires.
• Tèminal Sòti: For connecting the device to be controlled (IN/OUT).
• Limyè Endikatè: Provides feedback on pairing status and operation.
• Fuse Compartment: Houses a replaceable fuse for overcurrent protection (T5A H250V).
• Pè bouton: Used to link the switch with Trust Smart Home transmitters.

Figi 2: Fèmen view of the wiring terminals on the Trust ACM-1000. Labels for Live (L), Neutral (N), Input (IN), and Output (OUT) connections are clearly visible, indicating where electrical wires should be connected for power and load control.

Figi 3: Top view of the Trust ACM-1000, highlighting the fuse compartment labeled "T5A H250V" and the small indicator light. This view also shows the mounting tabs on the sides of the device.

Figi 4: Side view of the Trust ACM-1000, showing its slim profile and mounting clips. This view emphasizes the compact nature of the device, suitable for discreet installations.

4. Enstalasyon ak Enstalasyon

Before starting, ensure you have all necessary tools and that the power supply is disconnected.

4.1 Wiring the ACM-1000

1. Dekonekte pouvwa: Turn off the main power supply at your circuit breaker. Verify with a voltage tèsteur.
2. Prepare Fil: Strip approximately 8-10mm of insulation from the Live (L), Neutral (N), and load wires (IN/OUT).
3. Konekte Antre pouvwa:
   • Connect the main Live wire to the terminal marked L.
   • Connect the main Neutral wire to one of the terminals marked N.
4. Connect Load Output:
   • Connect the Neutral wire of your light/device to the other terminal marked N.
   • Connect the Live wire of your light/device to the terminal marked SOTI.
   • If using an existing switch, connect the switched Live wire from the switch to the terminal marked IN.
5. Enstalasyon an sekirite: Place the ACM-1000 in a suitable location such as a ceiling rose, junction box, or cabinet. Ensure it is securely mounted and wires are properly insulated.

Note: For outdoor use, the ACM-1000 must be installed inside an IP44-rated waterproof junction box to protect it from environmental elements.

4.2 Koneksyon ak yon transmetè

The ACM-1000 needs to be paired with a Trust Smart Home transmitter (e.g., remote control, wall switch, motion sensor) to function wirelessly.

1. Retabli pouvwa: Turn on the main power supply. The indicator light on the ACM-1000 should illuminate briefly.
2. Antre nan Mode Pè: Press the small pairing button on the ACM-1000 once. The indicator light will start flashing slowly.
3. Aktive Transmetè a: Within 10 seconds, press the 'ON' button (or the desired channel button) on your Trust Smart Home transmitter.
4. Konfimasyon: The indicator light on the ACM-1000 will flash rapidly a few times and then turn off, indicating successful pairing.
5. Tès: Use the transmitter to switch the connected device ON and OFF.

To pair additional transmitters, repeat steps 2-4. The ACM-1000 can store up to 6 different pairing codes.

4.3 Deleting Pairing Codes

To delete a single pairing code or all stored codes:

• Delete Single Code: Press the pairing button on the ACM-1000 once. When the indicator light flashes slowly, press the 'OFF' button (or the desired channel button) on the transmitter you wish to unpair. The indicator light will flash rapidly and turn off.
• Delete All Codes: Press and hold the pairing button on the ACM-1000 for approximately 5 seconds until the indicator light flashes rapidly and then turns off. All stored pairing codes are now deleted.

5. Operasyon Enstriksyon

Once installed and paired, the Trust ACM-1000 operates seamlessly with your Trust Smart Home transmitter.

• Chanje ON: Press the 'ON' button on your paired transmitter. The connected device will turn on.
• Chanje OFF: Press the 'OFF' button on your paired transmitter. The connected device will turn off.
• Manual Control (if applicable): If an existing wall switch is wired to the 'IN' terminal, you can still use it for manual control.

6. Antretyen

• Netwayaj: Clean the exterior of the device with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Ranplasman Fuse: If the connected device stops working and the indicator light does not illuminate, the fuse (T5A H250V) may need replacement. Always disconnect power before replacing the fuse. Use only fuses of the same type and rating.
• Pa gen okenn pati itilizatè yo ka fè sèvis: Beyond fuse replacement, there are no user-serviceable parts inside.

NAN. Depanaj

8. Espesifikasyon

• Modèl: ACM-1000 (Manufacturer ID: 71015)
• Mak: Fè konfyans
• Pwovizyon pou pouvwa: 220-240V ~, 50Hz
• Max chaj: 1000W (chaj rezistan)
• fuse: T5A H250V
• Frekans radyo: 433.92 MHz
• Ranje: Up to 30 meters indoors (environment dependent)
• Dimansyon: 5.3 x 6.8 x 2.5 cm
• Pwa: 60 g
• Koulè: Blan
• Evalyasyon pwoteksyon: IP20 (for indoor use, requires IP44 enclosure for outdoor)

9. Garanti ak sipò

Trust products are manufactured to high quality standards. In the unlikely event of a defect during the warranty period, please contact your retailer or the Trust customer support for assistance. Please retain your proof of purchase.

For the latest information, FAQs, and support, please visit the official Trust website or refer to the product page where you purchased the item.