Westinghouse 0471300 100W T4 GY8.6 Halogen Light Bulb User Manual

Entwodiksyon

This manual provides instructions for the safe installation, operation, and maintenance of the Westinghouse 0471300 100W T4 GY8.6 Halogen Light Bulb. Please read all instructions carefully before use to ensure proper function and safety.

Image: A Westinghouse 0471300 100W T4 GY8.6 Halogen Light Bulb, showing its compact T4 shape and two-pin GY8.6 base.

Enfòmasyon sou Sekirite

Obsève prekosyon sekirite sa yo pou evite blesi oswa domaj:

• Pouvwa Off: Always ensure the power supply to the fixture is turned off before installing, removing, or cleaning the bulb.
• Manyen ak Swen: Halogen bulbs operate at high temperatures. Allow the bulb to cool completely before handling.
• Evite kontak po: Do not touch the glass portion of the bulb with bare hands. Oils from your skin can create hot spots, leading to premature bulb failure. Use a clean cloth or gloves when handling.
• Bon enstalasyon: Use this bulb only in fixtures designed for 100W, 120V, GY8.6 base halogen bulbs. Ensure the fixture has adequate ventilation.
• Dispozisyon: Jete anpoul itilize yo dapre règleman lokal yo.

Enstalasyon ak Enstalasyon

1. Etenn pouvwa: Jwenn switch limyè a oswa disjonktè ki kontwole aparèy la epi koupe kouran an.
2. Pèmèt refwadisman: If replacing an old bulb, allow it to cool down completely before touching.
3. Retire ansyen anpoul: Carefully pull the old bulb straight out from its GY8.6 base socket.
4. Manyen nouvo anpoul la: Using a clean, dry cloth or gloves, carefully remove the new Westinghouse 0471300 bulb from its packaging. Avoid touching the glass with bare hands.
5. Mete yon nouvo anpoul: Align the two pins of the GY8.6 base with the holes in the socket. Gently push the bulb straight into the socket until it is fully seated. Do not force the bulb.
6. Retabli pouvwa: Turn the power supply back on at the switch or circuit breaker.

Enstriksyon Operasyon

The Westinghouse 0471300 halogen bulb operates like a standard light bulb. Once properly installed and power is restored:

• On/Off: Use the fixture's switch to turn the light on or off.
• Karakteristik dimmable: This bulb is dimmable. If your fixture is connected to a compatible dimmer switch, you can adjust the light output. Ensure your dimmer switch is rated for halogen bulbs and the total wattage of bulbs connected.

Antretyen

Minimal maintenance is required for this halogen bulb:

• Netwayaj: If the bulb requires cleaning, ensure the power is off and the bulb is cool. Gently wipe the glass with a clean, dry, lint-free cloth. Do not use liquid cleaners.
• Ranplasman: When the bulb reaches the end of its lifespan (approximately 1500 hours) or burns out, follow the 'Setup and Installation' steps to replace it with a new, compatible bulb.

Depanaj

If the bulb does not light or exhibits unusual behavior, consider the following:

• Anpoul pa limen:
  • Tcheke si switch pouvwa a sou.
  • Verifye ke disjonktè a pa deklanche.
  • Asire w ke anpoul la byen chita epi byen chita nan doubli a.
  • Test the bulb in another known working fixture, if possible, or try a new bulb in the current fixture to rule out a faulty bulb or fixture.
• Kout lavi:
  • Ensure the bulb was handled with a clean cloth or gloves during installation to avoid skin oils on the glass.
  • Verify that the fixture provides adequate ventilation to prevent overheating.
  • Konfime voltage supplied to the fixture matches the bulb's rated voltage (120V).

Espesifikasyon

Garanti ak sipò

For warranty information and customer support, please refer to the documentation provided with your purchase or contact Westinghouse directly. You can also visit the official Westinghouse store for more product details and support resources.

Visit the Westinghouse Store