Hilti TE-YX Hammer Drill Bit 00293026 User Manual

1. Entwodiksyon ak souview

This manual provides essential instructions for the safe and effective use of the Hilti TE-YX Hammer Drill Bit, model 00293026. This carbide drill bit is designed for high-performance drilling in various base materials, including concrete, reinforced concrete, masonry, and sand-lime brick. Its robust construction features a rebar-resistant carbide tip, an optimized SDS-Max connection end, and a heat-treated flute for enhanced durability and efficient dust removal.

Karakteristik kle yo enkli:

• TE-Y (SDS max) connection end for secure fitting.
• Suitable for concrete, reinforced concrete, masonry, and sand-lime brick.
• 17-5/8-inch working length for deep drilling applications.
• Stronger, rebar-resistant carbide tip attachment.
• Heat-treated flute for reduced wear and efficient dust removal.

Image 1: Close-up of the Hilti TE-YX Hammer Drill Bit, highlighting its robust carbide tip and spiral flute for efficient material removal.

2. Enstalasyon

Before beginning any drilling operation, ensure you have read and understood all safety instructions provided with your hammer drill and this drill bit.

2.1 Prekosyon sekirite

• Toujou mete ekipman pwoteksyon pèsonèl (PPE) ki apwopriye, tankou linèt sekirite, pwoteksyon pou zòrèy, ak gan.
• Ensure the hammer drill is unplugged or its battery removed before attaching or detaching the drill bit.
• Inspect the drill bit for any damage or excessive wear before each use. Do not use damaged bits.
• Asire w ke zòn travay la pa gen okenn obstak epi li byen eklere.

2.2 Attaching the Drill Bit

1. Clean the shank of the Hilti TE-YX drill bit to remove any dust or debris.
2. Apply a thin layer of Hilti chuck grease (or equivalent) to the SDS-Max shank of the drill bit. This helps reduce wear and ensures smooth operation.
3. Insert the drill bit into the SDS-Max chuck of your hammer drill. Push and twist the bit until it clicks into place.
4. Pull on the drill bit to ensure it is securely locked. There should be a small amount of axial play, which is normal for SDS-Max systems.

3. Operasyon Enstriksyon

The Hilti TE-YX Hammer Drill Bit is designed for use with SDS-Max rotary hammer drills. Always follow the operating instructions for your specific hammer drill model.

3.1 Pwosedi perçage

1. Mark the drilling location accurately on the workpiece.
2. Ensure the hammer drill is set to the "hammer drilling" mode.
3. Hold the hammer drill firmly with both hands. Position the drill bit perpendicular to the surface.
4. Start the drill at a low speed to create a pilot indentation, then increase to full speed once the bit has engaged the material.
5. Apply steady, consistent pressure. Avoid excessive force, as the hammer action of the drill is designed to do the work.
6. Periodically withdraw the drill bit slightly to allow dust to clear from the hole, especially for deeper holes. This improves drilling efficiency and bit life.
7. Once the desired depth is reached, withdraw the drill bit from the hole while the drill is still running to prevent it from getting stuck.

Image 2: Hilti TE-YX Hammer Drill Bit in use with a Hilti TE 70 hammer drill, demonstrating proper drilling technique into a concrete surface.

3.2 Material Specifics

• Concrete and Reinforced Concrete: The TE-YX bit is specifically designed to handle rebar encounters. Maintain steady pressure.
• Masonry and Sand-Lime Brick: These materials may require slightly less pressure. Ensure the hammer function is engaged for optimal performance.

4. Antretyen

Proper maintenance extends the life of your Hilti TE-YX Hammer Drill Bit and ensures consistent performance.

4.1 Netwayaj

• After each use, clean the drill bit thoroughly to remove all dust and debris, especially from the flutes and the SDS-Max shank. A stiff brush or compressed air can be used.
• Reapply a thin layer of chuck grease (or equivalent) to the SDS-Max shank before storage to prevent corrosion and ensure smooth insertion for future use.

4.2 Enspeksyon

• Regularly inspect the carbide tip for chips, cracks, or excessive wear. A worn tip will reduce drilling efficiency.
• Check the flutes for signs of clogging or damage.
• Examine the SDS-Max shank for wear or deformation. Significant wear on the shank can lead to poor connection and reduced power transfer.
• Replace the drill bit if any significant damage or wear is observed.

4.3 Depo

Store drill bits in a dry environment to prevent rust. Keep them in their original packaging or a dedicated drill bit case to protect the tips from damage.

NAN. Depanaj

If you encounter issues while using your Hilti TE-YX Hammer Drill Bit, refer to the following common problems and solutions:

6. Espesifikasyon

Detailed technical specifications for the Hilti TE-YX Hammer Drill Bit 00293026:

• Nimewo Modèl: 00293026
• Mak: HILTI
• Materyèl: Karbid
• Kalite tij: SDS-Max (TE-Y)
• Dyamèt: 1-1/4 pous
• Longè total: 23 pous
• Longè travay: 17-5/8 pous
• Dimansyon atik (L x W x H): 23 x 1.25 x 1.25 pous
• Pwa atik: 2.95 liv
• Tool Flute Type: Espiral
• Rekòmandasyon Sifas: Ductile (for optimal performance in concrete, reinforced concrete, masonry, sand-lime brick)
• UPC: 743153793060

7. Garanti ak sipò

For information regarding warranty coverage, product support, or service for your Hilti TE-YX Hammer Drill Bit, please refer to the official Hilti website or contact Hilti customer service directly. Keep your purchase receipt and product details handy when contacting support.

Visit Hilti Official Websit