Entwodiksyon
The Extech PRC30 is a handheld multifunction process calibrator designed for verifying the operation of various industrial instruments. It is suitable for use with sensors, thermocouple probes, controllers, panel meters, and other testing tools, particularly in temperature control and process troubleshooting applications.
Figi 1: Devan view of the Extech PRC30 Multifunction Process Calibrator, highlighting its display and control panel.
Karakteristik pwodwi
- Multifunction capability for various process calibration tasks.
- Handheld design for portability and ease of use.
- Dot matrix LCD for clear display of readings and settings.
- Intuitive button layout for operation.
Enstalasyon
Enstalasyon batri
- Jwenn kouvèti konpatiman batri a sou dèyè aparèy la.
- Louvri kouvèti a lè w glise l oswa devise l jan yo endike a.
- Insert the required batteries (type not specified, but typically AA or AAA) ensuring correct polarity.
- Ranplase kouvèti lòj batri a byen.
Enstriksyon Operasyon
Controls and Display Overview
The Extech PRC30 features a clear dot matrix LCD and a user-friendly control panel. Refer to Figure 1 for button locations.
- Power Button (Orange, circular with power symbol): Press to turn the calibrator ON or OFF.
- Bouton flèch (Anwo, Anba, Agoch, Adwat): Used for navigation, adjusting values, and selecting options.
- SET bouton: Konfime seleksyon yo oubyen antre nan meni paramèt yo.
- UNIT Button (under TYPE): Changes the measurement unit (e.g., °F, °C).
- I/O Button (under MODE): Toggles between input and output modes.
- MEM Button (under STEP): Accesses memory functions, such as saving or recalling data.
- ZERO Button (under ZERO, with lightbulb symbol): Performs zero adjustment or backlight control.
- CJC (Cold Junction Compensation) Indicator: Indicates the status of cold junction compensation.
- APO (Auto Power Off) Indicator: Shows if the auto power off function is active.
- SOURCE Indicator: Indicates the device is in source mode.
- MEM.25 Indicator: Likely indicates a memory location or a specific memory function.
Operasyon debaz
- Pouvwa sou: Press the orange power button. The display will illuminate.
- Chwazi mòd: Use the MODE (I/O) button to switch between input and output functions as required for your calibration task.
- Ajisteman Valè yo: Use the Up/Down arrow buttons to adjust output values or navigate through menu options. The Left/Right arrow buttons may be used for digit selection or fine-tuning.
- Chanje inite yo: Press the UNIT button to cycle through available measurement units (e.g., °F, °C).
- Ajisteman zewo: Use the ZERO button to perform a zero adjustment for current measurements or to activate the display backlight.
- Fonksyon memwa: Press the MEM button to save current readings or recall previously stored data.
- Pouvwa Off: Press and hold the orange power button until the display turns off. The Auto Power Off (APO) function will also turn off the device after a period of inactivity.
Antretyen
- Netwayaj: Siye aparèy la ak yon mou, damp twal. Pa sèvi ak pwodui netwayaj abrazif oswa solvang.
- Depo: Store the calibrator in a dry, cool environment when not in use. Remove batteries if storing for extended periods to prevent leakage.
- Ranplasman batri: Replace batteries promptly when the low battery indicator appears on the display to ensure accurate operation.
- Kalibrasyon: Li rekòmande pou pèsonèl kalifye fè yon kalibrasyon regilye pou kenbe presizyon mezi a.
Depanaj
| Pwoblèm | Kòz posib | Solisyon |
|---|---|---|
| Aparèy pa limen. | Pil ki mouri oswa ki mal enstale. | Check battery polarity and replace with fresh batteries. |
| Lekti ki pa kòrèk. | Needs calibration; environmental interference; incorrect settings. | Perform zero adjustment; ensure stable environment; verify measurement settings; consider professional calibration. |
| Ekran an vid oswa li fèb. | Batri fèb; limyè dèyè a etenn. | Replace batteries; press the ZERO button to activate backlight. |
Espesifikasyon
- Modèl: PRC30
- Deskripsyon: Kalibratè Pwosesis Multifonksyon
- Kalite ekspozisyon: Dot matris LCD
- Dimansyon (longè x lajè x wo): 6.375 pous (15.9 cm) x 3.25 pous (8 cm) x 1.75 pous (4.4 cm)
- Ranje Tanperati Fonksyònman: 41 a 104 ° F (5 a 40 ° C)
- Ranje imidite fonksyònman: <80% RH
- Sous pouvwa: Batri
- Orijin: Te fè nan Taiwan
Garanti ak sipò
The Extech PRC30 Multifunction Process Calibrator comes with a 1-Year Universal Guarantee.
For technical support, service, or warranty claims, please refer to the contact information provided with your purchase documentation or visit the official Extech Instruments websit.
