Manyèl Enstriksyon Mont Espò Dijital Casio Pro Trek PRG-270-1 Tough Solar

1. Entwodiksyon

This manual provides essential instructions for the proper use and maintenance of your Casio Pro Trek PRG-270-1 Tough Solar Digital Sport Watch. This timepiece is equipped with Casio's advanced Triple Sensor Version 3 technology, offering precise measurements for altitude, barometric pressure, temperature, and digital compass readings. Its Tough Solar power system ensures reliable operation by converting light into energy, eliminating the need for frequent battery replacements. Designed for outdoor enthusiasts, the watch also features 100-meter water resistance and low-temperature resistance.

Figi 1: Devan view of the Casio Pro Trek PRG-270-1 watch.

2. Enstalasyon

2.1 Premye chaj

Your watch is powered by a solar rechargeable battery. Upon first use or after prolonged storage, expose the watch face to bright light (sunlight or fluorescent light) for several hours to ensure a full charge. The battery level indicator (H, M, L) on the display shows the current charge status.

2.2 Time Setting and Format

To set the current time and date, or to switch between 12-hour and 24-hour formats:

1. Nan Mòd Konte Tan, peze epi kenbe bouton an AJISTE button (top-left) until 'SET' appears and your Home City code starts flashing.
2. Peze a MÒD button (bottom-left) twice to navigate to the 12H/24H setting.
3. Sèvi ak la ALTI button (bottom-right) to toggle between 12-hour and 24-hour display formats.
4. Peze a AJISTE button twice to save your selection and exit the setting mode.

2.3 Home City and Daylight Saving Time (DST)

To set your Home City and adjust Daylight Saving Time:

1. Nan Mòd Konte Tan, peze epi kenbe bouton an AJISTE button until 'SET' appears and your Home City code starts flashing.
2. Sèvi ak la COMP button (top-right) or ALTI button (bottom-right) to select your desired Home City code.
3. Peze a MÒD button to cycle through other settings until 'DST' appears.
4. Sèvi ak la ALTI button to toggle DST 'ON' or 'OFF'.
5. Peze a AJISTE button twice to save your selection and exit the setting mode.

3. Operasyon Modes

3.1 Digital Compass

The Digital Compass mode provides direction and bearing readings. Ensure the watch is held level for accurate readings.

1. From any mode, press the COMP button (top-right) to enter Digital Compass Mode.
2. The display will show the current direction (e.g., N, S, E, W) and degree value. The thickest arrow indicates North.
3. To set a bearing memory (a target direction), point the watch in the desired direction and press the AJISTE button (top-left). The bearing will be displayed.
4. To clear a bearing memory, press the AJISTE bouton ankò.
5. The compass will take readings for 60 seconds before pausing. Press COMP ankò pou rekòmanse.

3.2 Barometer and Thermometer

The watch can measure barometric pressure and temperature. For accurate temperature readings, remove the watch from your wrist and allow it to stabilize for 20-30 minutes to avoid body heat interference.

1. From any mode, press the BARO button (middle-right) to enter Barometer/Thermometer Mode.
2. The display will show the current barometric pressure and temperature.
3. To adjust the thermometer value (calibration):
   1. In Barometer/Thermometer Mode, press and hold the AJISTE button until the temperature value starts flashing.
   2. Sèvi ak la COMP button to decrease the value or the ALTI bouton pou ogmante valè a.
   3. To reset to factory default, press and hold both the COMP epi ALTI buttons simultaneously until 'OFF' appears, then release.
   4. Peze a AJISTE bouton pou sove ak sòti.

3.3 Countdown Timer

The Countdown Timer can be set from 1 minute up to 24 hours and runs in the background.

1. Nan Mòd Konte Tan, peze bouton an MÒD button (bottom-left) repeatedly until 'TMR' (Timer) appears.
2. Peze epi kenbe la AJISTE button until the hour value starts flashing.
3. Sèvi ak la COMP button to decrease the hour value or the ALTI bouton pou ogmante li.
4. Peze a MÒD button to switch to minute setting, then adjust using COMP/ALTI.
5. Peze a AJISTE button to save the timer setting.
6. To start/pause the timer, press the ALTI bouton an. Pou re-inisyalize, peze bouton an COMP button while paused.

3.4 Alam ak Hourly Siyal Tan

The watch features 5 daily alarms (4 one-time, 1 snooze) and an hourly tan siyal.

1. Nan Mòd Konte Tan, peze bouton an MÒD button repeatedly until 'ALM' (Alarm) appears.
2. Sèvi ak la COMP or ALTI buttons to cycle through AL-1 to AL-4, SNZ (Snooze Alarm), and SIG (Hourly Siyal Orè).
3. To set an alarm time:
   1. While the desired alarm (e.g., AL-1) is displayed, press and hold the AJISTE button until the hour value starts flashing.
   2. Sèvi ak la COMP or ALTI bouton pou ajiste lè a.
   3. Peze a MÒD button to switch to minute setting, then adjust using COMP/ALTI.
   4. Peze a AJISTE bouton pou sove lè alam lan.
4. Pou vire yon alam oswa hourly signal ON/OFF, select it and press the BARO button (middle-right). 'ON' or 'OFF' will be displayed.

3.5 Automatic Backlight

The Full Auto LED (Super Illuminator) Backlight can be set to activate automatically when you tilt your wrist towards you.

1. Nan Mòd Konte Tan, peze epi kenbe bouton an LIMYÈ button (bottom-center) for about 3 seconds.
2. 'LT' will appear on the display, indicating that the Auto Light feature is enabled.
3. To disable, press and hold the LIMYÈ button again until 'LT' disappears.

3.6 Backlight Duration

You can adjust the duration the backlight stays on (1.5 seconds or 3 seconds).

1. Nan Mòd Konte Tan, peze epi kenbe bouton an AJISTE button until 'SET' appears and your Home City code starts flashing.
2. Peze a MÒD button repeatedly until 'LIGHT' appears.
3. Sèvi ak la ALTI button to toggle between '1' (1.5 seconds) and '3' (3 seconds).
4. Peze a AJISTE button twice to save your selection and exit the setting mode.

4. Antretyen

4.1 Battery Level and Power Saving

The watch features a solar rechargeable battery. The battery level indicator (H: High, M: Medium, L: Low) is displayed on the watch face. When the battery level is low (L), some functions may be disabled. Expose the watch to light to charge it.

The Power Saving Function automatically turns off the display when the watch is left in the dark for a certain period to conserve power. The display will reactivate when exposed to light or a button is pressed.

4.2 Water and Temperature Resistance

The PRG-270-1 is 100-meter water resistant, suitable for swimming and snorkeling, but not for scuba diving. It is also low-temperature resistant down to -10°C (14°F).

4.3 Netwayaj ak swen

Regularly wipe the watch with a soft, dry cloth to remove dirt and moisture. Avoid using chemical cleaners. If the watch comes into contact with saltwater, rinse it thoroughly with fresh water and dry it completely.

NAN. Depanaj

• Lekti Capteur ki pa egzak: Ensure the watch is level for compass readings. For temperature, remove from wrist and allow stabilization. Calibrate sensors as needed (refer to full manual for detailed calibration steps).
• Display Blank: The Power Saving Function may have activated. Expose the watch to light or press any button. If the battery level is 'L', charge the watch.
• Bouton ki pa reponn: The watch may be in a specific mode or the battery might be extremely low. Try charging or resetting the watch (refer to full manual).

For more detailed troubleshooting, please refer to the comprehensive user manual available on the Casio official websit.

6. Espesifikasyon

7. Garanti ak sipò

This product is covered by a manufacturer's warranty. For specific warranty details, service, or additional support, please visit the official Casio websit la oubyen kontakte depatman sèvis kliyan yo. Kenbe prèv acha ou pou reklamasyon garanti.