EGLO 85266A

EGLO 85266A Koleksyon Rondo Tab Wonn Lamp Manyèl itilizatè

Entwodiksyon

This manual provides comprehensive instructions for the safe and efficient use of your EGLO 85266A Rondo Collection Round Table Lamp. Please read this manual thoroughly before installation and operation, and retain it for future reference.

EGLO Rondo Collection Round Table Lamp

Image: The EGLO Rondo Collection Round Table Lamp, featuring a frosted opal glass ball shade on a silver base.

Enfòmasyon sou Sekirite

Obsève prekosyon sekirite sa yo pou evite blesi oswa domaj nan pwodwi a:

  • Itilize andedan kay la sèlman: Sa a lamp is designed for indoor, dry locations only. Do not use in wet or damp anviwònman.
  • Sekirite elektrik: Ensure the power outlet matches the lampvoltage requirements (120 Volts). Always unplug the lamp from the power source before cleaning, changing the bulb, or performing any maintenance.
  • Kalite anpoul: Use only the specified bulb type (E26 A19) and do not exceed the maximum wattage (60W). Using an incorrect bulb may cause overheating or damage.
  • Plasman: Mete l laamp on a stable, flat surface to prevent tipping. Keep away from flammable materials.
  • Swen kòd: Do not place the power cord under rugs or in areas where it can be damaged or create a tripping hazard. Do not pull the cord to unplug the lamp.
  • Limit responsabilite nou legal: Tanpri tcheke lwa lokal ou yo anvan ou achteasing and installing this product.

Kontni pake

Verifye ke tout konpozan yo prezan epi yo pa domaje lè w ap debale yo:

  • 1 x EGLO 85266A Rondo Collection Round Table Lamp (Base and Glass Shade)

Nòt: The required E26 A19 bulb is not included and must be purchased separately.

Enstalasyon ak Enstalasyon

Swiv etap sa yo pou mete tab ou a an plas.amp:

  1. Dekonpoze: Carefully remove all components from the packaging. Retain packaging for future transport or returns.
  2. Enstalasyon anpoul:
    • Asire lamp li debranche nan priz kouran an.
    • Gently remove the glass shade to access the bulb socket.
    • Screw an E26 A19 bulb (maximum 60W) into the socket until secure. Do not overtighten.
    • Carefully reattach the glass shade.
  3. Plasman: Pozisyon lamp on a stable, level surface in your desired indoor location. Ensure the power cord can reach an outlet without being stretched or obstructed.
EGLO Rondo Lamp Base and Shade

Imaj: Yon gwo plan view of the EGLO Rondo lamp, illustrating the silver base and frosted opal glass shade assembly.

Operasyon

To operate your EGLO Rondo Table Lamp:

  1. Konekte ak pouvwa: Ploge l laamp's power cord into a standard 120V electrical outlet. The cord length is approximately 65 inches (165 cm).
  2. Limen/Etenyen: Locate the on/off switch on the power cord. Press the switch to turn the lamp sou oswa koupe.
EGLO Rondo Lamp on shelf with cord switch

Image: The EGLO Rondo lamp placed on a shelf, showing the power cord with its integrated on/off switch.

Antretyen

Regular maintenance ensures the longevity and appearance of your lamp:

  • Netwayaj: Dekonekte lamp from the power supply before cleaning. Use a soft, dry cloth to wipe the base and glass shade. Do not use abrasive cleaners or solvents, as these can damage the finish.
  • Ranplasman anpoul: When the bulb needs replacing, ensure the lamp is unplugged and the bulb has cooled down. Follow the bulb installation steps outlined in the 'Setup and Installation' section.

Depanaj

Si ou rankontre pwoblèm ak l ou aamp, refer to the following common solutions:

  • Lamp Pa Limen:
    • Tcheke si lamp is securely plugged into a working electrical outlet.
    • Verify that the on/off switch on the cord is in the 'on' position.
    • Inspect the bulb to ensure it is screwed in correctly and is not burnt out. Replace if necessary.
    • Test the outlet with another device to confirm it is receiving power.
  • Limyè tranbleman:
    • Asire w ke anpoul la byen vise.
    • Eseye yon lòt anpoul pou w ka wè si se yon anpoul ki gen pwoblèm.
    • Check the electrical connection at the wall outlet.

If problems persist after attempting these solutions, contact EGLO customer support for assistance.

Espesifikasyon

KarakteristikSpesifikasyon
Nimewo Modèl85266A
Dimansyon (D x W x H)12" x 12" x 12" (30.5 santimèt x 30.5 santimèt x 30.5 santimèt)
Pwa atik3 liv (1.36 kg)
MateryèlAsye alyaj, Vè
Fini KaliteAjan
Koulè lonbrajWhite (Frosted Opal)
Baz anpoulE26
Gwosè fòm anpoulA19
Maksimòm Wattage60 Watts
Voltage120 Volts
Sous pouvwaFil elektrik
Longè kòd65 pous (165 cm)
Chanje KaliteOn/Off (Corded)
Itilizasyon Andedan kay la / DeyòAndedan kay la sèlman
DimmableNon

Garanti ak sipò

For warranty information or technical support, please refer to the documentation provided at the time of purchase or contact EGLO customer service directly. Keep your purchase receipt as proof of purchase.

EGLO Logo

Image: The official EGLO brand logo.

Dokiman ki gen rapò - 85266A

Preview EGLO CUITE 390063A/390064A Tab Lamp Enstriksyon yo
Enstriksyon ofisyèl pou asanblaj ak itilizasyon tab EGLO CUITE aamp, modèl 390063A ak 390064A. Aprann kijan pou enstale anpoul la, tache lonbraj la, epi konekte kouran an.
Preview Tab EGLO LARA Lamp - Gid Itilizatè ak Espesifikasyon
Jwenn enstriksyon detaye ak espesifikasyon pou tab EGLO LARA a.amp (models 205275N, 205276N, 205277N). Learn how to install the bulb, connect power, use the ON/OFF switch, and utilize the 5V 1A output for charging.
Preview EGLO COGNOLI 97914A/97915A LED Desk Lamp: Instructions and Features
Comprehensive guide for the EGLO COGNOLI 97914A/97915A LED desk lamp, covering setup, touch controls, display functions, clock, alarm, snooze settings, and FCC compliance information.
Preview EGLO CONTESSORE 39917A Table Lamp Enstriksyon Asanble
Concise assembly instructions and product overview for the EGLO CONTESSORE 39917A table lamp. Includes step-by-step guidance and important notes.
Preview EGLO CAHUAMA Lamp (99824A/99825A) Assembly Instructions
Concise assembly instructions for the EGLO CAHUAMA table lamp, model numbers 99824A and 99825A. Learn how to install the bulb and connect the lamp pou pouvwa.
Preview Enstriksyon pou enstalasyon lanp pandantif EGLO 39685A LEMORIETA
Gid enstalasyon detaye pou lanp pandye EGLO 39685A LEMORIETA a, ki gen ladan prekosyon sekirite, fil elektrik, ak enstriksyon ajisteman wotè.