Manyèl Enstriksyon pou Limyè Miray oswa Plafon EGLO 86996A Nikita

Entwodiksyon

This manual provides detailed instructions for the safe installation, operation, and maintenance of your EGLO 86996A Nikita Wall or Ceiling Light. Please read this manual thoroughly before installation and retain it for future reference.

The EGLO Nikita light fixture features a transitional design with a matte nickel finish and satin glass accents, suitable for both wall and ceiling mounting.

Enfòmasyon enpòtan sou sekirite

AVÈTISMAN: Risk pou chòk elektrik. Dekonekte kouran an nan bwat fizib la oswa nan disjonktè a anvan enstalasyon oswa antretyen.

Always consult a qualified electrician if you are unsure about the installation process. Ensure all wiring connections are secure and comply with local electrical codes.

Pwodui sa a fèt pou itilizasyon andedan kay la sèlman. Pa ekspoze l nan imidite oswa tanperati ekstrèm.

Pwopozisyon 65 Avètisman: This product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Please check your local laws before purchasing pwodui sa a.

Ki sa ki nan bwat la

• Light Fixture (EGLO 86996A Nikita)
• Installation Hardware (screws, wire nuts, mounting bracket) - (Standard components, may vary slightly)
• Manyèl Enstriksyon

Nòt: 1x100W Halogen bulb is pa enkli epi yo dwe achte separeman.

Enstalasyon ak Enstalasyon

This section outlines the general steps for installing the EGLO 86996A light fixture. Specific details may vary based on your electrical box and mounting surface. Always ensure power is OFF before beginning installation.

Zouti obligatwa (pa enkli):

• Tournevis (Phillips ak/oswa Flathead)
• Fil retire rad sou ou
• Pens
• Tep elektrik
• Linèt sekirite

Etap enstalasyon:

1. Etenn pouvwa: Locate the circuit breaker or fuse box that supplies power to the installation location. Turn off the power completely. Verify power is off using a voltage tèsteur.
2. Prepare Sifas Montage: If replacing an existing fixture, carefully remove it. Ensure the electrical box is securely mounted and capable of supporting the fixture's weight.
3. Atache Sipò Montaj la: Secure the fixture's mounting bracket to the electrical box using the provided screws. Ensure it is firmly attached.
4. Fè koneksyon elektrik:
   • Konekte a fil tè vèt oswa kwiv toutouni from the fixture to the ground wire from the electrical box (usually bare copper or green). Secure with a wire nut.
   • Konekte a fil blan from the fixture to the white (neutral) wire from the electrical box. Secure with a wire nut.
   • Konekte a fil nwa from the fixture to the black (hot) wire from the electrical box. Secure with a wire nut.

   Ensure all wire nuts are tightly secured and no bare wire is exposed. Wrap connections with electrical tape for added security.
5. Monte aparèy la: Carefully align the fixture with the mounting bracket and secure it in place using the provided screws. Ensure the fixture is flush against the wall or ceiling.
6. Enstale anpoul: Insert one 100W Halogen bulb (not included) into the socket. Do not exceed the maximum wattage.
7. Retabli pouvwa: Once installation is complete and all connections are secure, turn the power back on at the circuit breaker or fuse box.

Imaj: Devan view of the EGLO 86996A Nikita Wall or Ceiling Light in matte nickel finish.

Image: The EGLO 86996A Nikita light fixture mounted on a blue wall, illustrating its up/down lighting effect.

Image: The EGLO 86996A Nikita light fixture integrated into a modern living room, demonstrating its aesthetic appeal.

Image: Dimensional drawing of the EGLO 86996A Nikita light, showing length (8.86"), width (3.15"), and height (4.92").

Operasyon

The EGLO 86996A Nikita light fixture operates via a standard wall switch (not included) connected to your household electrical system. It is designed for 120 Volts AC power.

• Limen/Etenyen: Sèvi ak switch miray la pou limen oswa etenn aparèy limyè a.
• Kalite anpoul: This fixture requires one 100W Halogen bulb (not included). Halogen bulbs can generate significant heat.
• Dimmable: The fixture is dimmable if connected to a compatible dimmer switch and using dimmable halogen bulbs.

Antretyen

Regular maintenance ensures the longevity and optimal performance of your light fixture.

• Netwayaj: Before cleaning, ensure the power is turned off and the fixture has cooled down. Wipe the fixture with a soft, dry cloth. Do not use abrasive cleaners, solvents, or polishes as they may damage the finish or glass.
• Ranplasman anpoul:
  1. Koupe kouran aparèy la nan disjonktè a.
  2. Allow the bulb to cool completely before touching it.
  3. Carefully remove the old bulb.
  4. Insert a new 100W Halogen bulb. Avoid touching the new halogen bulb directly with bare hands, as oils can reduce bulb life. Use a clean cloth or glove.
  5. Retabli pouvwa.
• Enspeksyon: Periodically check for any loose wiring or damaged components. If any damage is found, discontinue use and consult a qualified electrician.

Depanaj

If you encounter issues with your EGLO 86996A light fixture, refer to the following common troubleshooting steps:

Si etap sa yo pa rezoud pwoblèm nan, kontakte sèvis kliyan oswa yon elektrisyen kalifye.

Espesifikasyon

Enfòmasyon sou Garanti

This product comes with a Manufacturer's Warranty. For specific details regarding coverage, duration, and claims process, please refer to the warranty documentation included with your purchase or contact EGLO customer support directly.

Sipò pou Kliyan

For further assistance, technical support, or inquiries regarding your EGLO 86996A Nikita Wall or Ceiling Light, please contact EGLO customer service.

You can often find contact information on the EGLO official websit entènèt la oubyen atravè revandè w la.

Resous sou entènèt: Visit the EGLO Store on Amazon

Videyo pwodwi