1. Entwodiksyon
The Extech LT10 Pocket Light Meter is designed for measuring light intensity. This compact device provides accurate readings in both Foot-Candle (Fc) and Lux units, making it suitable for various applications requiring quick light measurements.
This manual provides detailed instructions for the proper setup, operation, maintenance, and troubleshooting of your LT10 light meter.
2. Enfòmasyon sou Sekirite
Please read and understand all safety instructions before operating the device. Failure to do so may result in damage to the meter or personal injury.
- Do not expose the meter to extreme temperatures or high humidity.
- Avoid dropping the meter or subjecting it to strong impacts.
- Keep the sensor clean and free from obstructions for accurate readings.
- Replace batteries promptly when the low battery indicator appears.
3. Pwodwi konpozan
Familiarize yourself with the main components of your Extech LT10 Pocket Light Meter:
Figi 1: Extech LT10 Pocket Light Meter. This image displays the front of the device, highlighting the light sensor at the top, the power button below it, and the LCD screen displaying "Lux" and a numerical reading.
- Capteur limyè: Located at the top of the meter, this component detects ambient light.
- Ekspozisyon LCD: Shows light intensity readings, units (Lux/Fc), and battery status.
- Bouton pouvwa: Used to turn the meter on and off.
4. Enstalasyon
4.1. Enstalasyon batri
The Extech LT10 requires one 9V battery (included). To install or replace the battery:
- Jwenn kouvèti konpatiman pil la sou dèyè mèt la.
- Glise oswa deklipe kouvèti a pou louvri li.
- Connect the 9V battery to the battery clip, observing correct polarity.
- Mete pil la nan konpatiman an epi fèmen kouvèti a byen fèm.
5. Operasyon Enstriksyon
5.1. Powering On / Off
Peze a Bouton pouvwa (marked with a circle and vertical line) to turn the meter on. The LCD display will illuminate automatically. Press the button again to turn the meter off.
5.2. Pran yon mezi
To take a light intensity measurement:
- Turn on the meter using the Power Button.
- Position the light sensor towards the light source or the area where you wish to measure light intensity. Ensure the sensor is not obstructed.
- Read the light intensity value displayed on the LCD screen. The unit (Lux or Fc) will be indicated.
- The meter automatically measures light intensity at a rate of 1.5 times per second.
5.3. Mezi Inite yo
The LT10 measures light intensity in two units:
- Lux: Lumens per square meter.
- Foot-Candle (Fc): Lumens per square foot.
The meter supports measurements up to 4000 Fc or 40,000 Lux.
6. Antretyen
6.1. Netwayaj
To ensure accurate readings and prolong the life of your meter:
- Siye c mèt laasinSiye ak yon twal mou epi sèk.
- Gently clean the light sensor with a soft, lint-free cloth. Do not use abrasive cleaners or solvents.
6.2. Ranplasman batri
Refer to Section 4.1 for instructions on replacing the 9V battery. Replace the battery when the low battery indicator appears on the display to ensure continuous operation and accurate measurements.
6.3. Depo
When storing the meter for extended periods, remove the battery to prevent leakage and potential damage to the device.
NAN. Depanaj
| Pwoblèm | Kòz posib | Solisyon |
|---|---|---|
| Kontè a pa limen. | Batri mouri oswa mal enstale. | Check battery polarity and replace the 9V battery if necessary (refer to Section 4.1). |
| Lekti ki pa kòrèk. | Dirty sensor, obstructed sensor, or low battery. | Clean the light sensor (Section 6.1). Ensure nothing is blocking the sensor. Replace battery if low battery indicator is present. |
| Ekran an vid oswa li ap tranble. | Batri fèb oswa pwoblèm entèn. | Replace the battery. If the problem persists, contact customer support. |
8. Espesifikasyon
- Ranje mezi: Up to 4000 Fc / 40,000 Lux
- Pousantaj Mezire: 1.5 fwa pa segonn
- Ekspozisyon: Large automatic backlit LCD
- Pouvwa: 9V batri (enkli)
- Dimansyon: Apeprè 5.32 x 9.13 x 1.81 pous (13.5 x 23.2 x 4.6 cm)
- Pwa: Apeprè 6.3 ons (178 gram)
- Modèl: LT10
- Manifakti: Extech Instruments
9. Enfòmasyon sou Garanti
Extech Instruments provides a limited warranty for this product. For detailed warranty terms and conditions, please refer to the warranty card included with your product or visit the official Extech websit la. Kenbe prèv acha ou pou reklamasyon garanti.
10. Sipò pou Kliyan
If you encounter any issues not covered in this manual or require further assistance, please contact Extech Customer Support. Contact information can typically be found on the Extech websit oswa nan anbalaj pwodwi a.
Pou plis enfòmasyon, vizite a Magazen Extech sou Amazon.
