Manyèl Itilizatè Adaptè Manhattan USB 3.0 Gigabit Ethernet (Modèl 506847)

Entwodiksyon

This manual provides detailed instructions for the installation, operation, and maintenance of your Manhattan USB 3.0 Gigabit Ethernet Adapter, Model 506847. This device allows you to connect your computer to a wired network at Gigabit speeds via a USB 3.0 port, enhancing network connectivity for devices without a built-in Ethernet port.

Image: The Manhattan USB 3.0 Gigabit Ethernet Adapter, a compact white device with a USB 3.0 connector and an RJ45 Ethernet port.

Karakteristik kle:

• Upgrades desktop or notebook computers to 10/100/1000 Mbps network speeds.
• Connects via USB 3.0, eliminating the need to open your computer chassis.
• Supports full-duplex mode for peak performance up to 2 Gbps.
• Automatic network speed detection (auto-negotiation).
• Konsepsyon kontra enfòmèl ant ak pòtab.

Enstalasyon

Follow these steps to properly install your Manhattan USB 3.0 Gigabit Ethernet Adapter:

1. Connect the Adapter to your Computer: Insert the USB 3.0 Type-A connector of the adapter into an available USB 3.0 port on your computer. For optimal performance, a USB 3.0 port is recommended. The adapter is also compatible with USB 2.0 ports, but at reduced speeds.


Image: The Manhattan USB 3.0 Gigabit Ethernet Adapter showing its USB 3.0 connector, ready to be plugged into a computer.

2. Konekte nan rezo a: Plug a standard RJ45 Ethernet cable from your network router, switch, or modem into the RJ45 port on the adapter.


Imaj: Yon gwo plan view of the adapter's RJ45 Ethernet port, where a network cable is connected.

3. Enstalasyon chofè: In most modern operating systems (Windows 7/10, macOS, Linux), the necessary drivers will install automatically upon connection. If automatic installation does not occur, please refer to the troubleshooting section or visit the Manhattan support websit pou telechaje chofè yo.
4. Verifye Koneksyon: Once the drivers are installed, your computer should recognize the new network connection. You can verify this through your operating system's network settings.

Enstriksyon Operasyon

After successful installation, the Manhattan USB 3.0 Gigabit Ethernet Adapter functions as a standard wired network interface. Your computer will automatically use this connection for internet access and local network communication if it is the primary network interface or if your wireless connection is disabled.

• Vitès rezo a: The adapter will automatically negotiate the fastest possible speed with your network equipment (10 Mbps, 100 Mbps, or 1000 Mbps).
• Endikatè ki ap dirije: The adapter may feature LED indicators to show link status and activity. Consult the device itself for specific LED behavior.

Antretyen

The Manhattan USB 3.0 Gigabit Ethernet Adapter requires minimal maintenance to ensure optimal performance and longevity.

• Netwayaj: Use a soft, dry cloth to clean the exterior of the adapter. Avoid using liquid cleaners or solvents.
• Depo: Lè w pa ap itilize adaptè a, sere l nan yon kote ki fre epi sèk, lwen limyè solèy dirèk ak tanperati ekstrèm.
• Manyen: Avoid bending or twisting the cable excessively. Do not expose the adapter to moisture.

Depanaj

If you encounter issues with your Manhattan USB 3.0 Gigabit Ethernet Adapter, please refer to the following common solutions:

1. Pa gen koneksyon rezo:
   • Ensure the adapter is securely plugged into both your computer's USB port and the Ethernet cable is firmly connected to the adapter and your network device.
   • Verify that your network router or switch is powered on and functioning correctly.
   • Check your computer's network settings to ensure the Ethernet adapter is enabled and configured for DHCP (automatic IP address assignment).
2. Vitès rezo a ba:
   • Ensure you are connected to a USB 3.0 port on your computer for optimal Gigabit speeds. USB 2.0 ports will limit speeds.
   • Confirm that your Ethernet cable is a Cat5e or Cat6 cable, suitable for Gigabit Ethernet.
   • Check your network equipment (router/switch) to ensure it supports Gigabit Ethernet.
3. Driver Issues (Especially macOS):
   • For macOS users, particularly with versions like Catalina (10.15) or Mojave (10.14) and newer, specific drivers may be required. The adapter may not be plug-and-play for these operating systems.
   • Visit the official Manhattan support website and search for drivers specific to Model 506847 and your macOS version.
   • For Windows users, if drivers do not install automatically, check Device Manager for unrecognized devices and attempt to update drivers or download them from the Manhattan support websit.
4. Adaptè pa rekonèt:
   • Eseye branche adaptè a nan yon lòt pò USB sou òdinatè w la.
   • Rekòmanse òdinatè w lan.
   • Ensure your computer's USB ports are functioning correctly by testing with another USB device.

Espesifikasyon

Konpatibilite

The Manhattan USB 3.0 Gigabit Ethernet Adapter is compatible with a wide range of devices and operating systems:

• Operating System Families: macOS, Windows (including Windows 7, Windows 10), Linux.
• Aparèy: Desktop PCs, Laptops, Ultrabooks (e.g., Dell XPS, Acer Aspire series), Chromebooks, Apple Macbooks.
• Egzijans pò: Available USB 2.0 or USB 3.0 port (USB 3.0 recommended for best performance).

Note: For specific macOS versions, driver installation may be required. Refer to the Troubleshooting section for details.

Garanti ak sipò

For warranty information and technical support regarding your Manhattan USB 3.0 Gigabit Ethernet Adapter (Model 506847), please visit the official MANHATTAN website or contact their customer service department. Details regarding product registration, warranty claims, and support resources can typically be found on the manufacturer's websit.

Manifakti: Manhattan

Websit: www.manhattanproducts.com