Manyèl Itilizatè Switch ALLIED TELESIS AT-GS950/10PS Gigabit Ethernet PoE+

1. Entwodiksyon

This manual provides comprehensive instructions for the installation, operation, and maintenance of the Allied Telesis AT-GS950/10PS Gigabit Ethernet PoE+ Switch. This device is designed to provide reliable network connectivity with Power over Ethernet capabilities for various applications.

The AT-GS950/10PS is a managed switch featuring 8 Power over Ethernet Plus (PoE+) ports, 2 Gigabit Ethernet ports, and 2 SFP combo ports. It supports web-based management for easy configuration and monitoring.

Figi 1: Devan view of the Allied Telesis AT-GS950/10PS Gigabit Ethernet PoE+ Switch, showing the 8 PoE+ ports, 2 Gigabit ports, 2 SFP combo ports, and LED indicators for power, PoE status, speed, link, and activity.

2. Pake kontni

Verifye ke pake ou a gen atik sa yo:

• Allied Telesis AT-GS950/10PS Gigabit Ethernet PoE+ Switch
• Twous aliye
• Etajè aliye twous
• Adaptè kouran (pa nan lis eksplisit la men li enplisit pou operasyon an)
• Quick Start Guide (not explicitly listed but typical)

If any items are missing or damaged, please contact your vendor or Allied Telesis support.

3. Enstalasyon ak Enstalasyon

3.1. Plasman fizik

The AT-GS950/10PS switch can be installed in a desktop, rack-mountable, or wall-mountable configuration. Ensure adequate ventilation around the unit to prevent overheating. Avoid placing the switch near sources of electromagnetic interference, excessive dust, or moisture.

3.2. Koneksyon pouvwa

1. Connect the power adapter to the power input port on the rear panel of the switch.
2. Branche adaptè kouran an nan yon priz kouran AC ki apwopriye.
3. The PWR LED on the front panel will illuminate, indicating that the switch is receiving power.

3.3. Koneksyon rezo

Connect network devices (e.g., computers, servers, access points, IP cameras) to the switch using standard Ethernet cables.

• RJ-45 Ports (1-8): These are 10/100/1000BASE-T PoE+ ports. Connect PoE-compatible devices to these ports to provide both data and power.
• RJ-45 Ports (9R, 10R): These are 10/100/1000BASE-T Gigabit Ethernet ports.
• SFP Combo Ports (9, 10): These ports are shared with RJ-45 ports 9R and 10R. Insert compatible SFP transceivers for fiber optic connections. When an SFP module is inserted, the corresponding RJ-45 port is disabled.

3.4. Konfigirasyon Inisyal (Web-based Management)

The switch features web-based management for configuration. Refer to the separate "Web-based Management Guide" for detailed instructions on accessing and configuring the switch's settings, including VLANs, QoS, and port settings.

4. Itilizasyon switch la

4.1. Endikatè ki ap dirije

The front panel LEDs provide real-time status information about the switch and its ports.

4.2. Pouvwa sou Ethernet Plus (PoE+)

The AT-GS950/10PS provides up to 30 watts of power per port on ports 1-8, compliant with IEEE 802.3at (PoE+). This allows for powering devices such as wireless access points, IP cameras, and VoIP phones directly through the Ethernet cable, simplifying deployment and reducing cabling requirements.

5. Antretyen

5.1. Netwayaj

Ensure the switch is powered off and disconnected from all cables before cleaning. Use a soft, dry cloth to wipe the exterior of the unit. Do not use liquid or aerosol cleaners, as they may damage the device.

5.2. Mizajou Firmware

Periodically check the Allied Telesis website for available firmware updates. Firmware updates can provide new features, performance improvements, and security enhancements. Follow the instructions provided with the firmware update package carefully.

5.3. Konsiderasyon anviwònman

Maintain the operating environment within the recommended temperature and humidity ranges specified in the product's technical specifications to ensure optimal performance and longevity of the switch.

NAN. Depanaj

This section provides solutions to common issues you may encounter with the AT-GS950/10PS switch.

6.1. Pa gen pouvwa

• Asire w adaptè kouran an byen konekte ak switch la ak yon priz kouran ki fonksyone.
• Verifye si priz kouran an ap fonksyone byen lè w branche yon lòt aparèy.
• Check the PWR LED on the front panel. If it is off, the switch is not receiving power.

6.2. No Network Link

• Asire w kab Ethernet la byen konekte ak pò switch la ak aparèy rezo a.
• Verify that the LINK/ACT LED for the connected port is solid green. If not, try a different cable or port.
• Check the network device to ensure it is powered on and functioning correctly.
• Pou pò SFP yo, asire w ke modil SFP a byen mete epi li konpatib.

6.3. Aparèy PoE a pa resevwa kouran

• Ensure the device connected is PoE-compatible (IEEE 802.3af/at).
• Verify that the PoE LED for the specific port is illuminated.
• Check the PoE MAX LED. If it is amber, the switch may be exceeding its total power budget. Disconnect non-essential PoE devices or reduce power consumption.
• Ensure the Ethernet cable is capable of carrying power (standard Cat5e or higher).

6.4. Reyajiste switch la

If the switch is unresponsive or experiencing persistent issues, a factory reset may be necessary. Refer to the "Web-based Management Guide" for instructions on performing a factory reset, as this will erase all custom configurations.

7. Espesifikasyon

8. Garanti ak sipò

8.1. Garanti pwodwi

Allied Telesis products are covered by a limited warranty. For detailed information regarding the warranty period and terms, please refer to the warranty statement available on the official Allied Telesis website or contact your local sales representative.

8.2. Sipò teknik

For technical assistance, product documentation, or to download the latest firmware, please visit the official Allied Telesis support website. You can also contact Allied Telesis technical support directly for further assistance.

Note: Always refer to the latest documentation available on the manufacturer's websit pou enfòmasyon ki pi ajou.