CLOVER D1-K

CLOVER D1-K Hot and Cold Countertop Bottleless Water Cooler Instruction Manual

Entwodiksyon

Thank you for choosing the CLOVER D1-K Hot and Cold Countertop Bottleless Water Cooler. This manual provides essential information for the safe and efficient operation, installation, and maintenance of your new water dispenser. Please read all instructions carefully before use and retain this manual for future reference.

Enfòmasyon enpòtan sou sekirite

Toujou swiv prekosyon sekirite debaz yo lè w ap itilize aparèy elektrik pou diminye risk dife, chòk elektrik ak aksidan pèsonèl.

Kontni pake

Your CLOVER D1-K water cooler package includes:

Espesifikasyon

ModèlD1-K
Kalite pwodwiHot and Cold Countertop Bottleless Water Dispenser
Dimansyon pwodwi10.7" lajè x 16.8" pwofondè x 17.2" wotè
Pwa pwodwiNet: 26 lbs, Gross: 31 lbs
Koulè pwodwiNwa ak ajan
ElektrikPriz 110V
Kalite febrifujR134a
Kalite COMPRESSORLG
SètifikasyonUL
Tanperati DloCho ak Fwad
Cold Water Rate0.6 GAL of 50°F/HR
Hot Water Rate1.8 GAL of 185°F/HR
Cold Water ThermostatReglabl soti nan 32 ° F a 50 ° F
Thermostat dlo choControlled to 185°F
Built-In Filtration SystemWi
Filtre lavi750 gallons or 12 months
Energy Star RatedWi

Enstalasyon

1. Plasman

Place the water cooler on a flat, stable countertop. Ensure there is at least 4 inches of clearance from walls to allow for proper ventilation and efficient operation. The unit dimensions are 10.7"W x 16.8"D x 17.2"H, designed to fit under standard cabinets.

Clover D1-K Water Cooler with dimensions labeled
Figure 1: CLOVER D1-K Water Cooler with labeled dimensions (10.7"W x 16.8"D x 17.2"H).

2. Koneksyon Tiyo Dlo

This bottleless water cooler connects directly to your existing plumbing. The package includes all necessary installation hardware and water line for a basic setup. Follow the detailed instructions provided with the installation kit to connect the water line to a cold water source.

Entèn view of the Clover D1-K water cooler showing tanks and filtration system
Figure 2: Internal components of the CLOVER D1-K, including stainless steel tanks and filter housing.

3. Initial System Flush

Before first use, it is crucial to flush the system to remove any air or carbon fines from the new filter. Once the water line is connected and the water supply is turned on, dispense several cups of water from both the hot and cold faucets until the water runs clear and free of air bubbles. This ensures optimal water quality and taste.

Enstriksyon Operasyon

1. Dispense Dlo

The CLOVER D1-K features easy-to-use push faucets for dispensing water. The unit provides both hot and cold water.

Devan view of the Clover D1-K water cooler with hot and cold water faucets
Figi 3: Devan view of the CLOVER D1-K, highlighting the hot and cold water dispensing areas and the hot water safety lock.

2. Fast Fill Rate

The dispenser offers a fast fill rate, capable of dispensing 16 oz in under 8 seconds. The deep fill area accommodates large sport bottles and containers.

Antretyen

1. Netwayaj

The CLOVER D1-K water dispenser requires minimal maintenance. The removable drip tray is made of ABS plastic and is dishwasher safe for easy cleaning. Regularly wipe down the exterior with a soft, damp twal.

2. Filtre Ranplasman

The built-in filtration system ensures clean, fresh water. The filter cartridge (2H-L) has a life of approximately 750 gallons or 12 months, whichever comes first. Refer to the filter replacement instructions provided with your replacement filter for detailed steps.

Depanaj

If you experience issues with your CLOVER D1-K water cooler, please consult the following common problems and solutions:

Garanti

The CLOVER D1-K Hot and Cold Countertop Bottleless Water Cooler comes with a 1-ane garanti sou pati yo ak yon Garanti 3 ane sou konpresè a apati dat acha a. Tanpri konsève prèv acha ou pou reklamasyon garanti. Garanti sa a kouvri domaj nan materyèl ak nan fabrikasyon anba itilizasyon nòmal.

Sipò

For further assistance, technical support, or to inquire about replacement parts, please contact CLOVER customer service. Refer to the contact information provided on the product packaging or the official CLOVER websit.

Dokiman ki gen rapò - D1-K

Preview Gid Sistèm POS Clover: Plan Lojisyèl, Enstalasyon, ak Depanaj
Gid konplè pou sistèm POS Clover yo, ki kouvri detay sou plan lojisyèl, konfigirasyon aparèy, entegrasyon aplikasyon twazyèm pati, depanaj pwoblèm komen, ak jesyon operasyon biznis yo.
Preview Manyèl Aplikasyon Clover P2PE v5.0: Gid pou Pwosesis Peman Sekirize
Manyèl sa a bay enstriksyon detaye pou aplike solisyon chifreman pwen-a-pwen (P2PE) Clover la. Aprann sou aparèy apwouve yo, enstalasyon, pwotokòl sekirite, ak depanaj pou tèminal peman Clover yo.
Preview Manyèl Implementasyon Clover P2PE: Enstalasyon ak Sekirite Aparèy Peman An Sekirite
Manyèl sa a bay enstriksyon detaye pou aplike solisyon chifreman pwen-a-pwen (P2PE) Clover la, ki kouvri konfigirasyon aparèy, pwotokòl sekirite, ak depanaj pou tèminal peman Clover yo.
Preview Manyèl Aplikasyon Clover P2PE: Gid pou Pwosesis Peman Sekirize
Manyèl sa a detaye aplikasyon chifreman pwen a pwen (P2PE) pou aparèy Clover Mobile, Mini, ak Flex, li kouvri konfigirasyon, sekirite, ak konfòmite PCI pou tranzaksyon peman an sekirite.
Preview Gid Enstalasyon Clover Mobile: Enstalasyon, Aktivasyon, ak Tranzaksyon
Gid konplè pou konfigirasyon, aktive, epi itilize aparèy Clover Mobile la pou pwosesis peman. Li kouvri konfigirasyon pyès ki nan konpitè a, koneksyon rezo a, enstalasyon aplikasyon an, jesyon PIN lan, koneksyon enprimant lan, ak jesyon tranzaksyon yo.
Preview Espesifikasyon ak Karakteristik Sistèm POS Clover Mini 3 la
Espesifikasyon detaye ak karakteristik Clover Mini 3 la, yon sistèm POS entelijan kontra enfòmèl ant pou kontwa. Gen ladan konparezon ak Clover Mini 2, opsyon koneksyon, akseswa, ak pwosesis peman.