KanexPro Adjustable Tilt Wall Mount Instruction Manual

Entwodiksyon

This manual provides comprehensive instructions for the safe and proper installation and operation of your KanexPro Adjustable Tilt Wall Mount. Please read this manual thoroughly before installation and retain it for future reference. This high-quality tilting wall mount bracket is designed for compatible televisions, offering a secure and adjustable vieweksperyans nan.

Enfòmasyon sou Sekirite

AVÈTISMAN: Failure to read and follow these instructions may result in serious personal injury, property damage, or voiding of your warranty. If you do not understand these instructions, or have doubts about the safety of the installation, please contact a qualified installer.

• Do not install this product on walls that are not structurally sound. Ensure the mounting surface can safely support the combined weight of the mount and the display.
• Always use a stud finder to locate wooden studs. If mounting to concrete, ensure appropriate anchors are used.
• Pa depase kapasite pwa maksimòm lan ki se 165 liv (75 kg).
• This mount is designed for indoor use only.
• Kenbe ti pati yo lwen timoun yo.
• Always have at least two people for installation to prevent injury or damage.

Kontni pake

Please verify that all components are present and undamaged before installation. If any parts are missing or defective, contact KanexPro customer support.

• Asanble Plak Miray la
• TV Bracket Arms (2)
• Twous Materyèl Montaj (divès vis, rondelle, espasè, lank)
• Enstriksyon enstalasyon (manyèl sa a)

Image: The main components of the KanexPro wall mount, showing the wall plate and two vertical TV bracket arms.

Enstalasyon ak Enstalasyon

Zouti obligatwa (pa enkli): Pencil, Drill, Phillips Head Screwdriver, Level, Stud Finder, Measuring Tape, Hammer (for concrete anchors).

Etap 1: Tache parantèz televizyon sou televizyon

1. Mete televizyon ou a fas anba sou yon sifas mou epi pwòp pou evite domaje ekran an.
2. Idantifye twou VESA aliye yo sou do a nan televizyon ou.
3. Chwazi vis, rondelle, ak espasè ki apwopriye yo nan twou pyès ki nan konpitè a ki anfòm ak twou montaj televizyon ou an.
4. Attach the two TV bracket arms to the back of your TV, ensuring they are vertically aligned and securely fastened. The hooks on the bracket arms should face downwards.

Etap 2: Monte plak miray la sou miray la

1. Determine the desired height for your TV. Hold the wall plate against the wall and mark the top and bottom center points.
2. Use a stud finder to locate two adjacent wooden studs. Mark the center of each stud. The wall plate is designed to span two studs.
3. Position the wall plate against the wall, aligning the mounting holes with the marked stud centers. Use a level to ensure the wall plate is perfectly horizontal.
4. Mark the drill points through the holes on the wall plate.
5. Drill pilot holes at the marked locations. For wood studs, use a smaller drill bit than the lag bolts. For concrete, use a masonry drill bit and insert concrete anchors.
6. Secure the wall plate to the wall using the provided lag bolts and washers. Tighten firmly, but do not overtighten.

Image: Technical diagram illustrating the VESA compatibility ranges (min/max) for both horizontal and vertical dimensions, along with the overall measurements of the wall plate (32" wide x 8 7/8" high).

Etap 3: Pandye televizyon an sou yon plak miray

1. Avèk asistans, leve televizyon an avèk anpil atansyon avèk sipò yo ki tache ak li.
2. Align the hooks on the TV bracket arms with the top edge of the wall plate.
3. Gently lower the TV, ensuring the hooks engage securely with the wall plate.
4. Once the TV is hanging, locate the safety screws or locking mechanisms on the bottom of the TV bracket arms. Tighten these to secure the TV to the wall plate and prevent accidental dislodging.
5. Verify that the TV is level and securely mounted.

Imaj: Yon angilè view of the KanexPro wall mount, highlighting the robust construction and the tilting mechanism on the bracket arms.

Operating the Tilt Feature

This wall mount features a variable downward tilt from 0° to -15°.

1. To adjust the tilt, locate the tilt adjustment knobs or bolts on the side of each TV bracket arm.
2. Loosen these knobs/bolts slightly.
3. Carefully tilt the bottom of your TV forward or backward to achieve the desired viewang ang.
4. Once the desired angle is set, firmly tighten the tilt adjustment knobs/bolts to secure the TV in place.

Antretyen

Regular maintenance ensures the longevity and safe operation of your wall mount.

• Netwayaj: Siye montur la avèk yon twal mou epi sèk. Pa sèvi ak pwodui netwayaj abrazif oswa solvan.
• Tcheke peryodik: Tcheke tout vis ak boulon yo detanzantan pou asire yo rete sere epi byen fèm. Sere boulon yo ankò si sa nesesè.
• Domaj: If any part of the mount appears damaged or worn, do not use it. Contact KanexPro for replacement parts or professional assistance.

Depanaj

Espesifikasyon

• Nimewo Modèl: K-WALLM-14-BLK-0847
• Kalite montaj: Mi mòn
• Kalite mouvman: Panche
• Materyèl: Alloy Steel
• Koulè: Black scratch resistant finish
• Kapasite maksimòm pwa: 165 liv (75 kg)
• Karakteristik enklinezon: 0° to -15° Degrees (Variable Downward Tilt)
• Maximum Compatible TV Size: 51 pous
• Aparèy konpatib: Televizyon
• Pwa atik: 13 liv (apeprè 5.9 kg)

Garanti ak sipò

For warranty information and customer support, please refer to the KanexPro official website or contact their customer service department directly. Please have your model number (K-WALLM-14-BLK-0847) and purchase details ready when contacting support.

Manifakti: KanexPro