1. Entwodiksyon
This manual provides comprehensive instructions for the setup, operation, and maintenance of your Snom IP 710 Phone. The Snom 710 is designed for business telephony, offering a rich set of features for real-time communication.
Karakteristik kle yo enkli:
- 4 Line Backlit B/W Display
- 12 Identities/Lines support
- 5 Programmable function keys
- Support for four SIP identities
2. Pake kontni
Anvan ou kontinye ak enstalasyon an, tanpri verifye si tout konpozan yo prezan nan pake a:
- Snom IP 710 Phone unit
- Aparèy
- Kòd appareil
- Ethernet kab
- Adaptè kouran (si w pa itilize Power over Ethernet - PoE)
- Kanpe biwo
Figure 1: Snom IP 710 Phone unit with handset. This image displays the black phone unit from a slight angle, highlighting its display, keypad, and the coiled handset cord.
3. Enstalasyon
3.1. Koneksyon fizik
- Konekte telefòn nan: Plug one end of the coiled handset cord into the handset and the other end into the designated handset port on the phone base.
- Konekte sou rezo a:
- Sèvi ak pouvwa sou Ethernet (PoE): Connect an Ethernet cable from your PoE-enabled network switch or router to the LAN port on the back of the phone. The phone will power on automatically.
- Sèvi ak adaptè kouran: If PoE is not available, connect the Ethernet cable from your network to the LAN port, and then connect the power adapter to the phone's power input and a wall outlet.
- Position the Desk Stand: Attach the desk stand to the back of the phone unit to position it at a comfortable viewang ang.
3.2. Initial Boot-up and Configuration
Upon successful connection, the phone will power on and begin its boot sequence. The display will show boot progress and then attempt to obtain network settings (IP address) via DHCP. Once connected to the network, it will attempt to register with your SIP server.
- Montre Estati: Observe the display for network and registration status. A successful registration typically shows the line status as "Registered" or similar.
- Aksè Web Entèfas: For advanced configuration, you can access the phone's web koòdone pa antre adrès IP li nan yon web browser on a computer connected to the same network. The IP address can usually be found in the phone's network settings menu.
4. Operasyon Enstriksyon
4.1. Fè apèl
- Leve aparèy la: Lift the handset or press the speakerphone button to get a dial tone.
- Rele Nimewo: Antre nimewo telefòn ou vle a lè l sèvi avèk klavye a.
- Initiate Call: Peze a Rele button (often a green phone icon) or wait a few seconds for the call to automatically initiate.
4.2. Resevwa Apèl
When an incoming call is received, the phone will ring and the display will show caller ID information.
- Reponn apèl: Lift the handset or press the speakerphone button to answer the call.
- Rejte apèl: Peze a Rejte button (often a red phone icon) to decline the call.
4.3. Using Programmable Function Keys
The Snom IP 710 features 5 programmable function keys, typically located on the side of the display. These keys can be configured for various functions such as speed dial, busy lamp field (BLF), call park, or line appearance. Refer to your system administrator for specific configurations.
4.4. Navigasyon ekran
Use the navigation cluster (up, down, left, right arrows, and OK button) to navigate through menus, contacts, and call history on the backlit display.
5. Antretyen
5.1. Netwayaj
Pou kenbe aparans ak fonksyonalite telefòn ou an:
- Wipe the phone's surface with a soft, damp, twal ki pa gen pèl.
- Pa sèvi ak pwodui netwayaj abrazif, sir, oswa solvan.
- Ensure the phone is unplugged from power before cleaning.
5.2. Mizajou lojisyèl
Periodically, Snom may release firmware updates to improve performance or add new features. These updates are typically managed by your system administrator. Do not attempt to update the firmware yourself unless instructed by your administrator or Snom support.
NAN. Depanaj
This section addresses common issues you might encounter with your Snom IP 710 Phone.
| Pwoblèm | Kòz posib | Solisyon |
|---|---|---|
| Telefòn nan pa limen. | No power from PoE or power adapter. | Check Ethernet cable connection to PoE switch. Verify power adapter is securely plugged into phone and wall outlet. |
| Pa gen ton rele. | Phone not registered with SIP server; network issue. | Check network cable. Verify SIP registration status on the display. Contact your system administrator if registration fails. |
| Cannot hear caller / Caller cannot hear me. | Handset/speaker volume too low; faulty handset cord; network quality issue. | Adjust volume. Ensure handset cord is securely connected. Test with speakerphone. Check network connection quality. |
| Ekran an vid oswa li bloke. | Software glitch; power issue. | Unplug the phone from power for 10 seconds, then plug it back in to restart. If the issue persists, contact support. |
For more complex issues, please consult your IT department or Snom technical support.
7. Espesifikasyon
| Karakteristik | Detay |
|---|---|
| Nimewo Modèl | 2793 |
| Dimansyon pwodwi (L x W x H) | 10.8 x 9.8 x 3.8 pous |
| Pwa atik | 2.6 liv |
| Koulè | Nwa |
| Ekspozisyon | 4 Line Backlit B/W Display |
| SIP Identities | 4 |
| Kle pwogramasyon | 5 |
| Sous pouvwa | Corded Electric (supports PoE) |
| Aparèy konpatib | VoIP services, SIP-based systems and networks |
| Kapasite Apèl Konferans | Debaz |
| Premye Dat ki disponib | 30 novanm 2012 |
8. Garanti ak sipò
For warranty information, please refer to the documentation provided at the time of purchase or visit the official Snom website. Snom products typically come with a limited manufacturer's warranty.
For technical support, troubleshooting assistance beyond this manual, or inquiries regarding advanced features and system integration, please contact your IT administrator or Snom customer support directly. You can usually find support contact details on the Snom official websit.
