Entwodiksyon
This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your SKIL 3386-01 9-Inch Band Saw. Please read this manual thoroughly before operating the tool to ensure proper usage and to prevent injury or damage.
Enstriksyon Sekirite Enpòtan
Toujou swiv prekosyon sekirite debaz yo lè w ap itilize zouti elektrik pou diminye risk dife, chòk elektrik, ak aksidan pèsonèl.
- Mete pwoteksyon pou je: Always wear safety goggles or safety glasses with side shields when operating the band saw.
- Kenbe Zòn Travay la Apwòp: Ensure your work area is well-lit and free from clutter. Remove all tools, scraps, and other obstructions from the table before starting the saw.
- Dekonekte pouvwa: Always disconnect the power cord from the electrical outlet before making any adjustments, changing accessories, or performing maintenance on the saw.
- An sekirite pou pyès travay la: Always hold the workpiece firmly against the table and fence. Never attempt to cut a workpiece that is too small to be safely supported.
- Kenbe yon bon balans: Pa depase. Kenbe bon pye ak balans tout tan.
- Avoid Forcing the Tool: Allow the blade to cut at its own pace. Forcing the tool can lead to kickback or blade breakage.
- Sèvi ak lam kòrèk: Ensure the correct blade type and size are used for the material being cut.
- Kenbe gad yo an plas: Never operate the saw without all guards in their proper positions.
Eleman enkli
Your SKIL 3386-01 9-Inch Band Saw package includes the following items:
- SKIL 3386-01 9-Inch Band Saw Unit
- 6 TPI Band Saw Blade
- Rip kloti
- Mitre Kalib
- Articulating LED Work Light
- 1-1/2 inch Dust Port
Enstalasyon
Debalaj ak enspeksyon
Carefully remove all components from the packaging. Inspect the saw for any signs of damage that may have occurred during shipping. Report any damage to your retailer immediately.
Asanble
Attach the work table to the main unit using the provided hardware. Ensure all fasteners are tightened securely. Install the band saw blade by following the instructions for opening the blade access covers and positioning the blade around the wheels. Refer to Figure 1 for a general overview.
Figi 1: Plis paseview of the SKIL 3386-01 9-Inch Band Saw during operation, demonstrating proper hand placement for guiding material.
Blade Tension and Tracking Adjustment
Proper blade tension is crucial for accurate cuts and blade longevity. Use the tensioner knob located on the top of the saw to adjust the blade tension. The blade tracking can be adjusted to ensure the blade runs centrally on the wheels. Consult the tracking adjustment guide on the side of the saw for precise alignment. Refer to Figure 2 for blade area.
Figure 2: The band saw in action, illustrating its capability to cut intricate and curved patterns in wood.
Tab Ajisteman Ang
The work table can be tilted to perform angled cuts. Loosen the table locking knob located beneath the table, adjust the table to the desired angle using the angle scale, and then securely tighten the knob. Always verify the angle with a protractor or square before cutting. Refer to Figure 4 for table adjustment.
Enstriksyon Operasyon
Power On/Off
The power switch is located on the front of the saw. Press the 'ON' button to start the saw and the 'OFF' button to stop it. Ensure the saw reaches full speed before beginning a cut.
Sèvi ak kloti Rip la
For straight, accurate cuts, attach the rip fence to the table. Adjust the fence to the desired width from the blade and lock it in place. Guide the workpiece firmly against the fence and into the blade. Refer to Figure 3 for rip fence usage.
Figure 3: Utilizing the rip fence for precise straight cuts, ensuring consistent material width.
Sèvi ak kalib Miter la
The miter gauge is used for cross cuts and angled cuts across the width of the workpiece. Insert the miter gauge into the slot on the table and adjust it to the desired angle. Hold the workpiece firmly against the miter gauge and guide it through the blade. Refer to Figure 4 for miter gauge usage.
Figure 4: Adjusting the table for angled cuts using the miter gauge, allowing for versatile woodworking applications.
Cutting Irregular Shapes
For cutting irregular shapes and curves, ensure the rip fence and miter gauge are removed. Slowly guide the workpiece into the blade, following your marked line. Use a narrower blade for tighter curves. Refer to Figure 2 for an example of cutting irregular shapes.
Ki ap dirije limyè travay
The articulating LED work light provides illumination to your workpiece and cut line. Adjust the light to your preferred position for optimal visibility. The light operates when the saw is powered on.
Antretyen
Regular maintenance ensures the longevity and safe operation of your band saw.
- Netwayaj: Regularly clean the saw, especially the dust port (1-1/2 inch) and blade path, to prevent sawdust buildup which can affect performance and safety.
- Enspeksyon ak Ranplasman Lam: Inspect the blade for dullness, cracks, or missing teeth before each use. Replace dull or damaged blades immediately.
- Blade Tension and Tracking: Periodically check and adjust blade tension and tracking as described in the Setup section to maintain optimal cutting performance.
- Lubrifikasyon: Refer to the detailed product manual for specific lubrication points and schedules.
Depanaj
Seksyon sa a adrese pwoblèm komen ou ka rankontre ak si bann ou an.
- Blade Wandering or Inaccurate Cuts:
- Check blade tension; it may be too loose.
- Verify blade tracking is centered on the wheels.
- Inspect blade guides for proper adjustment and wear.
- Ensure the blade is sharp and appropriate for the material.
- Twòp Vibration:
- Ensure the saw is securely mounted to a stable workbench.
- Check the blade for damage or improper installation.
- Inspect the wheels for debris or damage.
- Motor Overheating or Loss of Power:
- Avoid forcing the workpiece through the blade; let the saw cut at its own pace.
- Ensure the motor's ventilation openings are clear of dust and debris.
- Check for proper electrical supply.
Espesifikasyon pwodwi
| Karakteristik | Spesifikasyon |
|---|---|
| Mak | Skil |
| Nimewo Modèl | 3386-01 |
| Koulè | Wouj |
| Sous pouvwa | Fil elektrik |
| Materyèl lam | High Speed Steel |
| Longè lam | 9 pous |
| Included Blade TPI | 6 TPI |
| Sifas Rekòmandasyon | Bwa |
| Dimansyon pwodwi (L x W x H) | 31.15" x 16.25" x 12.75" |
| Pwa atik | 30.86 liv |
| Pousyè Port Size | 1-1/2 pous |
Garanti ak sipò pou kliyan
The SKIL 3386-01 9-Inch Band Saw comes with a Limited Warranty. For detailed warranty information, service, or technical support, please refer to the official SKIL websit la oubyen kontakte sèvis kliyan yo dirèkteman. Kenbe resi acha w la kòm prèv acha pou reklamasyon garanti.
