Entwodiksyon ak Enfòmasyon sou Sekirite
Thank you for choosing the Bestron Sweet Dreams Ceramic Kettle. This manual provides important information for the safe and efficient use of your appliance. Please read these instructions carefully before first use and keep them for future reference.
Prekosyon Sekirite Enpòtan:
- Always ensure the kettle is placed on a stable, flat, heat-resistant surface.
- Do not immerse the kettle or its base in water or any other liquid.
- Kenbe aparèy la pa rive jwenn timoun yo.
- Do not operate the kettle if it is damaged or malfunctioning. Contact customer support.
- Avoid touching hot surfaces. Use the heat-insulated handle.
- Asire w kouvèti a byen fèmen anvan ou itilize li.
- Do not fill above the maximum water level indicator to prevent boiling water from overflowing.
- The kettle features automatic shut-off and boil-dry protection for safety.
Enstalasyon
- Debake: Carefully remove the kettle and its base from the packaging. Retain packaging for storage or disposal.
- Plasman: Place the power base on a dry, flat, and stable surface, away from the edge of the countertop. Ensure the power cord is not dangling.
- Netwayaj pou Premye Itilizasyon: Before first use, fill the kettle with clean water up to the maximum level. Boil the water, then discard it. Repeat this process two to three times to remove any manufacturing residues.
Image: The Bestron Sweet Dreams Ceramic Kettle on its 360-degree swivel power base, illustrating the rotational capability.
Enstriksyon Operasyon
- Ranpli Kettle a: Remove the kettle from its base and open the lid. Fill the kettle with the desired amount of fresh water. Do not fill below the minimum mark or above the maximum 0.8L level indicator. Close the lid securely.
- Mete sou baz: Place the filled kettle firmly onto its 360° swivel power base.
- Koneksyon pouvwa: Plug the power cord into a suitable wall socket. The cord storage system on the base helps manage excess cable length (cable length: 79 cm).
- Limen: Press the ON/OFF switch located on the kettle. An indicator light will illuminate, signifying that the kettle is heating.
- Pwosesis bouyi: The water will quickly heat to 100°C. The kettle will automatically switch off once the water has boiled. The indicator light will turn off.
- Vide: Carefully lift the kettle from its base using the heat-insulated handle and pour the hot water. Always pour slowly and carefully to avoid splashes.
- Re-bouyi: Si ou bezwen bouyi dlo a ankò, tann kèk moman pou switch otomatik la re-mete anvan ou peze switch ON/OFF la ankò.
Image: The Bestron Sweet Dreams Ceramic Kettle shown in a usage scenario, alongside a cup of tea, highlighting its aesthetic design.
Antretyen ak netwayaj
Regular cleaning and maintenance will ensure the longevity and optimal performance of your Bestron kettle.
Netwaye eksteryè a:
- Toujou debranche kettle a epi kite l refwadi nèt anvan w netwaye.
- Siye deyò bouyi a ak baz elektrik la avèk yon twal mou.amp twal.
- Do not use abrasive cleaners, scouring pads, or harsh chemicals, as these can damage the ceramic surface.
Detartraj:
Limescale can build up inside the kettle, especially in hard water areas, affecting performance and taste. The integrated heating element is resistant to limescale accumulation, but periodic descaling is still recommended.
- Ranpli chodyè a ak yon melanj dlo ak vinèg blan (pa egzanp, 1 pati vinèg pou 2 pati dlo) oubyen yon solisyon detartran komèsyal dapre enstriksyon pwodwi a.
- Bouyi melanj lan epi kite l repoze pou omwen 30 minit, oswa plis pou gwo debri.
- Empty the kettle and rinse thoroughly with fresh water several times to remove any vinegar residue or descaling solution.
- Si sa nesesè, repete pwosesis la.
Depanaj
| Pwoblèm | Kòz posib | Solisyon |
|---|---|---|
| Bouyi a pa limen. | Pa branche, kouran koupetage, kettle not properly seated on base, switch not pressed. | Check power connection. Ensure kettle is correctly placed on the base. Press the ON/OFF switch firmly. Check household fuse/circuit breaker. |
| Dlo pa bouyi. | Insufficient water, lid not closed, faulty heating element. | Ensure water level is above minimum. Close the lid securely. If problem persists, contact customer support. |
| Bouyi a etenn twò vit. | Limescale buildup, boil-dry protection activated. | Descale the kettle. Ensure there is sufficient water before boiling. |
| Unusual taste in water. | New appliance residue, limescale buildup. | Perform first-use cleaning steps again. Descale the kettle. |
Espesifikasyon
- Modèl: DTP800SD
- Mak: Bestron
- Kapasite: 0.8 lit
- Pouvwa: Apeprè 1785 wat
- Materyèl: Ceramic / Metal (Copper heating element)
- Koulè: Blan
- Dimansyon (LxWxH): 23.5 x 16 x 19 cm
- Pwa: 1.36 kg
- Karakteristik espesyal: Insulated heating element, Boil-dry protection, Automatic shut-off, Cordless jug, 360° swivel base, Cord storage.
Garanti ak sipò
Your Bestron Sweet Dreams Ceramic Kettle DTP800SD comes with a 5-ane garanti, ensuring quality and reliability. This warranty covers manufacturing defects under normal household use.
For warranty claims, technical support, or any questions regarding your product, please refer to the contact information provided with your purchase or visit the official Bestron website. Please have your model number (DTP800SD) and proof of purchase ready when contacting support.
