Fluke 355 Vrè RMS Clamp-Manyèl Itilizatè Mèt la

Entwodiksyon

The Fluke 355 digital clamp-meter is a true RMS sensing, auto-ranging multimeter designed for precise measurement of current, voltage, frequency, and resistance in various electrical testing applications. It features a robust clamp mechanism for non-contact current measurement and a comprehensive set of functions for professional use, ensuring accurate readings for both linear and non-linear loads.

Enfòmasyon sou Sekirite

Always adhere to safety precautions when working with electrical equipment. This device is designed to meet IEC safety standard 61010-2-032.

• CAT IV, 600V: Suitable for measurements at the source of the low-voltage installation, such as electricity meters and primary over-current protection equipment.
• CAT III, 1,000V: Suitable for measurements within fixed installations, including switches and industrial equipment permanently connected to the fixed installation.

Ensure proper personal protective equipment (PPE) is used, and always follow local safety regulations when operating this device.

Ki sa ki nan bwat la

Your Fluke 355 Clamp-Meter package includes the following components:

• Fluke 355 digital clamp-mèt
• Tès plon ansanm
• Tès sond ansanm
• Kayiman clip seri
• (6) pil AA
• Ka pote mou
• Manyèl itilizatè

Image: All components included with the Fluke 355 Clamp-Meter, neatly arranged.

Karakteristik pwodwi

• Vrè deteksyon RMS: Provides accurate readings for both linear and non-linear loads, regardless of waveform.
• Mezi Kouran Segondè: Measures AC and DC current up to 2,000A (1,400A AC RMS).
• Gwo Ouvèti Machwa: 58mm (2.3 inches) jaw opening accommodates large or multiple conductors for non-contact current measurement.
• Voltage Mezi: Mezi AC voltage jiska 600V ak DC voltage jiska 1,000V.
• Frequency and Resistance: Measures frequency up to 1kHz and resistance up to 400kΩ.
• Inrush Current Function: Analyzes surge current during motor startup and other inductive loads for stable measurements.
• Filtre ki pase ba: Reduces high-frequency interference for accurate measurements of complex waveforms.
• Min/Max Function: Toggles to display lowest, highest, and average readings.
• Done kenbe: Freezes the reading on the display for easy documentation in tight spaces.
• Sonèt Kontinuite: Confirms electrical continuity.
• Retroeklere LCD: Improves visibility in low-light conditions, with automatic backlight shut-off.
• Auto Power Off: Conserves battery life by automatically turning off after 20 minutes of non-use.
• Endikatè batri ki ba: Signals when batteries need replacement.

Enstalasyon

Enstalasyon batri

The Fluke 355 requires six 1.5V AA batteries for operation. These are typically included with your purchase.

1. Jwenn kouvèti konpatiman batri a sou dèyè aparèy la.
2. Sèvi ak yon tournevis pou louvri kouvèti a.
3. Insert the six AA batteries, ensuring correct polarity (+/-).
4. Ranplase kouvèti lòj batri a epi an sekirite li.

Premye enspeksyon

Before first use, inspect the clamp-meter, test leads, and accessories for any signs of damage. Do not use the device if any damage is observed.

Enstriksyon Operasyon

Limen / Off

Turn the rotary switch to any measurement function to power on the device. Turn the rotary switch to "OFF" to power off. The device will automatically power off after 20 minutes of inactivity to conserve battery life.

Measuring AC/DC Current (Clamp Fonksyon)

1. Turn the rotary switch to the "A AC+DC" position.
2. Press the jaw release lever to open the clamp machwè.
3. Pozisyon clamp jaws around a single conductor. Ensure the jaws are fully closed.
4. Li valè aktyèl la sou ekran LCD a.

Image: The clamp jaws of the Fluke 355 securely closed around an electrical conductor for current measurement.

Mezire Voltage (AC/DC)

1. Connect the test leads to the appropriate input jacks (COM and V).
2. Turn the rotary switch to the "V AC+DC" position.
3. Konekte sond tès yo atravè sikwi a oswa konpozan ki pral mezire a.
4. Li voltage valè sou LCD a.

Measuring Resistance (Ω)

1. Connect the test leads to the appropriate input jacks (COM and Ω).
2. Turn the rotary switch to the "Ω" position.
3. Asire w sikwi a pa gen enèji anvan ou mezire rezistans lan.
4. Connect the test probes across the component to be measured.
5. Li valè rezistans lan sou ekran LCD a.

Lòt Fonksyon

• RANGE: Manually select the measurement range if auto-ranging is not desired.
• RETE: Press to freeze the current reading on the display. Press again to release.
• ZEWO: Used to zero out DC current readings or resistance readings for lead compensation.
• Hz: Mezire frekans.
• INRUSH: Measures the peak current during motor startup.
• MINIMÒM MAXIMÒM: Toggles through minimum, maximum, and average readings captured during a measurement session.
• FILTÈ: Activates a low-pass filter to reduce electrical noise for stable readings.

Imaj: Detaye view of the Fluke 355 Clamp-Meter's display and control panel.

Antretyen

Netwayaj

Netwaye mèt la casing ak piblisiteamp twal ak savon dou. Pa sèvi ak pwodui abrazif oswa solvan. Kenbe ekran an pwòp epi sèk.

Ranplasman batri

When the low-battery indicator appears on the display, replace all six AA batteries promptly to ensure accurate measurements. Follow the battery installation steps outlined in the Setup section.

Depo

Sere cl laamp-meter in its soft carrying case in a dry, dust-free environment when not in use. Remove batteries if storing for extended periods to prevent leakage.

Depanaj

If the Fluke 355 Clamp-Meter is not functioning as expected, consider the following:

• Pa gen ekspozisyon/pouvwa: Check if the batteries are correctly installed and have sufficient charge. Replace batteries if necessary. Ensure the rotary switch is not in the "OFF" position.
• Lekti ki pa kòrèk: Verify that the correct measurement function is selected. Ensure test leads are properly connected and not damaged. For current measurements, ensure the clamp machwè yo konplètman fèmen otou yon sèl kondiktè.
• Sonèt Kontinuite a pa fonksyone: Ensure the device is in the continuity measurement mode and the circuit is de-energized.

For persistent issues, refer to the official Fluke support resources or contact customer service.

Espesifikasyon

Garanti ak sipò

Fluke Corporation provides high-quality testing tools. For warranty information, technical support, or service, please visit the official Fluke websit oswa kontakte depatman sèvis kliyan yo.

Ou ka jwenn plis enfòmasyon ak resous sipò nan Magazen Fluke sou Amazon.