1. Entwodiksyon
This manual provides essential information for the safe and efficient use of your Smeg Classic PGF96 87cm Gas Cooktop. Please read these instructions carefully before installation and use, and keep them for future reference. This cooktop features 6 gas burners, automatic ignition, and durable cast iron pan supports, all within a sleek stainless steel design.
Image: The Smeg Classic PGF96 gas cooktop, showcasing its six burners with active flames, set into a dark countertop.
2. Enfòmasyon sou Sekirite
Enpòtan: Gas appliances require careful handling. Improper installation, adjustment, alteration, service, or maintenance can cause injury or property damage. Refer to this manual. For assistance or additional information, consult a qualified installer, service agency, or the gas supplier.
- Ensure adequate ventilation in the kitchen.
- Pa sere materyèl ki ka pran dife tou pre kizin lan.
- Kenbe timoun yo lwen aparèy la pandan operasyon an.
- Pa janm kite kwit manje poukont li.
- If you smell gas, immediately turn off the gas supply, open windows, and do not operate any electrical switches. Contact your gas supplier.
- Use only stable cookware appropriate for the burner size.
3. Enstalasyon
Installation of this appliance must be carried out by a qualified technician in accordance with local regulations and standards. Incorrect installation can void the warranty and pose safety risks.
- Ensure the countertop opening dimensions match the cooktop's requirements (refer to specifications).
- Verify that the gas supply pressure is compatible with the appliance.
- Connect the cooktop to the gas supply using approved flexible or rigid piping.
- Tcheke tout koneksyon gaz yo pou flit avèk yon solisyon dlo savon.
- Ensure proper electrical grounding for the automatic ignition system.
Image: A top-down perspective of the Smeg Classic PGF96 gas cooktop, showing the layout of its six burners and control knobs when not in use.
4. Enstalasyon
After professional installation, perform these initial checks:
- Remove all packaging materials and protective films from the cooktop surface and pan supports.
- Netwaye sifas kizin lan ak anonsamp twal ak detèjan twò grav.
- Place the cast iron pan supports securely over their respective burners.
- Ensure all control knobs are in the 'OFF' position.
5. Operasyon Enstriksyon
Your Smeg PGF96 cooktop features automatic electronic ignition for ease of use.
Imaj: Yon gwo plan view of the Smeg Classic PGF96 gas cooktop, highlighting the stainless steel surface and the precise control knobs.
To Ignite a Burner:
- Push down the control knob for the desired burner.
- While holding it down, turn the knob counter-clockwise to the maximum flame setting (large flame symbol).
- The automatic igniter will click, and the burner will light.
- Continue to hold the knob down for a few seconds after ignition to allow the thermocouple to heat up and activate the flame failure device.
- Lage bouton an. Si flanm dife a etenn, repete pwosesis la.
- Adjust the flame size by turning the knob between the maximum and minimum flame settings.
To Turn Off a Burner:
Turn the control knob clockwise until it clicks into the 'OFF' position (dot symbol).
6. Netwayaj ak antretyen
Netwayaj ak antretyen regilye ap asire lonjevite ak pèfòmans optimal recho ou a.
Cooktop Surface (Stainless Steel):
- Kite plat la refwadi nèt anvan w netwaye.
- Use a soft cloth or sponge with warm soapy water.
- For stubborn stains, use a non-abrasive stainless steel cleaner. Always wipe in the direction of the grain.
- Rinse thoroughly and dry with a soft, clean cloth to prevent water spots.
Sipò chodyè an fè fonn:
- Remove the pan supports from the cooktop.
- Wash them in warm soapy water. For baked-on food, soak them before scrubbing.
- Dry thoroughly before placing them back on the cooktop to prevent rust.
Burner Caps and Rings:
- Remove burner caps and rings when cool.
- Clean with warm soapy water and a non-abrasive brush.
- Ensure burner ports are clear of food debris. Use a fine wire or needle if necessary.
- Dry completely before reassembling. Incorrect reassembly can affect flame quality.
NAN. Depanaj
Anvan ou kontakte sèvis la, tcheke pwoblèm komen sa yo:
| Pwoblèm | Kòz posib | Solisyon |
|---|---|---|
| Brûler pa pran dife | No gas supply; Igniter electrode dirty; Burner cap/ring incorrectly placed; Power outage. | Check gas valve; Clean electrode; Realign burner parts; Check power supply. |
| Flame is uneven or yellow | Burner ports clogged; Incorrect gas type/pressure; Air mixture incorrect. | Clean burner ports; Contact a qualified technician to check gas supply/adjust air mixture. |
| Odè gaz | Fwit gaz. | Immediately turn off gas supply, ventilate area, do not use electrical switches, contact gas supplier. |
8. Espesifikasyon
| Karakteristik | Detay |
|---|---|
| Non mak | Smeg |
| Modèl | PGF96 |
| Kantite eleman chofaj | 6 |
| Koulè | Nerjaveèi asye |
| Sous pouvwa | Gas Operated |
| Kalite gaz | Gaz |
| Karakteristik espesyal | 6 Burners, Automatic Electronic Ignition, Very Low Profile Stainless Steel Base, Heavy-Duty Cast Iron Pan Supports |
| Materyèl sifas aparèy chofaj | Nerjaveèi asye |
| Materyèl | Nerjaveèi asye |
| Kalite Sistèm Ignisyon | Elektwonik |
| Dimansyon (H x W x P) | 79mm x 867mm x 512mm |
9. Garanti ak sipò
For warranty information, please refer to the warranty card included with your product or contact your retailer. For technical support, service, or spare parts, please contact Smeg customer service or an authorized service center. Always provide the model number (PGF96) and serial number of your appliance when seeking assistance.
You can find more information on the official Smeg websit: www.smeg.com